Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
Mazut a heavy lowquality fuel used in power generating plants and similar applications In the US and Western Europe mazut is blended or broken down with the final product that is diesel The Mazut100 is a fuel that is produced under the GOST specifications for example GOST 1058599 Mazut is almost exclusively manufactured in the Russian Federation Kazakhstan Azerbaijan and Turkmenistan The most important thing is to qualify the fuel sulfur content The VLS Mazut 10075 and 10099 Mazut Grade I are actually the same thing GOST merged the old classifications of 75 and 99 in a new classification of seven degrees all under 10099 For some reason many people still use the old adjective 75 particularly the Chinese
Jet A1 is a� kerosene-type fuel. Jet fuel or aviation turbine fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. During the refining process only 8% of the crude oil is made up of Jet fuel.
Speciality The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C. All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels. Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Palm Wax Type: Industrial Grade Origin: China AUCO No.: 998 Packing: 25kg bag Items Standard Acid value, (mg KOH/g) 6.0 Peroxide value, mmol/kg 1.5 Free Fatty Acids 0.1 Colour (Lovibond colorimeter 133.4mm cell) 2.0R Melting point, 42-62
Product Name: Gel Wax Type: Industrial Grade Origin: China AUCO No.: 997 Packing: 25kg bag Items Standard Colour Transparent Moisture and volatiles % 1 Melting point, 50-80
Dear buyer! We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export. Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively). contact us for the procedure. Note: Seller do not work according to someone else's procedures. The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
Paraffin are products produced in oil refineries, from the deparaffination of mineral oils. Paraffins have many applications and are available in different formats: solid paraffin (slabs, pellets, powder) and liquid paraffin. Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike. Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available. If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !
Fushun 0.5%oil content refined solid paraffin wax, kunlun brand. Paraffin Wax 1.100% Pure Paraffin Wax 2.ISO 9001 proved 3. Transparent and White 4.Low Oil Content 5. SGS 6. REACH Fully refined and semi refined paraffin wax is used widely, mainly used as candles,board,plastics,rubber and other commodity(like waxed paper ,crayons,candles,carbon paper) of the component and packing materials, baking container with dressing, used for electrical components, insulation rubber aging resistance and increased flexibility, etc.
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard. AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS). Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
Superior product quality Herrera Petroleum Corp Herrera Petroleum Corporation buys and sells petroleum refined products. The Company offers gasoline, crude oil, alcohol, diesel, and fuels. Herrera Petroleum serves its clients in the State of Florida.Maximum 0.00015% water dilution/Contamination It is not uncommon to have higher water content Colonial Pipeline Specs Cleaner burning fuel, high efficiency Guaranteed cost savings Flexible Terms
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�°C (86�°F) to approximately 200�°C (392�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
MARINE GAS OIL (MGO) describes marine fuels that consist exclusively of distillates. Distillates are all those components of crude oil that evaporate in fractional distillation and are then condensed from the gas phase into liquid fractions. Marine gasoil usually consists of a blend of various distillates.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. The most important thing when grading this fuel is the sulphur content.
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Diesel exhaust fluid (DEF) is an aqueous urea solution made with 32.5 percent high-purity urea (AUS 32) and 67.5 percent deionized water. DEF is used as a consumable in Selective Catalytic Reduction (SCR) in order to lower NOx concentration in the diesel exhaust emissions from diesel engines. PRODUCT SPECIFICATION SHEET Urea Liquor 50% DEF Grade Typical Chemical Analysis Parameter Specification Urea Concentration, wt.% 50.0 +- 1.0 Free Ammonia (alkalinity), wt.% 0.31 max Biuret, wt.% 0.46 max Parameter Typical Urea Concentration 32.5 +- 0.7 % Density at 20 oC 1087.0 -1093.0 kg/m3 Refractive Index at 20 oC 1.3814 �¢?? 1.3843 Free Ammonia (alkalinity) 0.2% max Biuret 0.3% max Aldehydes 5 ppm max Insoluble Matter 20 ppm max Phosphates 0.5 ppm max Calcium 0.5 ppm max Iron 0.5 ppm max Copper 0.2 ppm max Zinc 0.2 ppm max Chromium 0.2 ppm max Nickel 0.2 ppm max Aluminum 0.5 ppm max Magnesium 0.5 ppm max Sodium 0.5 ppm max Potassium 0.5 ppm max Water Quality DEMIN ISO 3696 Applicable
