Petroleum By Products Suppliers and Manufacturers

Superior Quality Functional Bitumen, sourced from the best refineries, our bitumen meets international standards for quality consistency. This bitumen is obtained by blowing hot air at a temperature of 200 to 300 degrees into pure bitumen. with a strong logistic network, we gaurantee timely and secure delivery to your projected port.

Superior Quality VISCOSITY BITUMEN , sourced from the best refineries, our bitumen meets international standards for quality and consistency. these grades are vailable, VG 10, VG20, VG30, VG40

Superior Quality Penetrating Bitumen sourced from the best refineries, our bitumen meets international standards for quality consistency. Available grades, 40-50 , 60-70 , 85-100 , 120-150 , 200-300 with strong logistic network, we guarantee timely and secure delivery to your projected port.

Oil Platform

Liquefied petroleum gases (LPG): A group of hydrocarbon gases, primarily propane, normal butane, and isobutane, derived from crude oil refining or natural gas processing. These gases may be marketed individually or mixed. Liquefied petroleum gas, also referred to as LPG or LP gas, is� a fuel gas which contains a flammable mixture of hydrocarbon gases, specifically propane, n-butane and isobutane. LPG, any of several liquid mixtures of the volatile hydrocarbonâ??s propene, propane, butene, and butane. It was used as early as 1860 for a portable fuel source, and its production and consumption for both domestic and industrial use have expanded ever since. A typical commercial mixture may also contain ethane and ethylene, as well as a volatile mercaptan, an odorant added as a safety precaution.

liquefied natural gas (LNG), natural gas (primarily methane) that has been liquefied for ease of storing and transporting. Liquefied natural gas (LNG) is 600 times smaller than natural gas when the latter is in its gaseous form, and it can be easily shipped overseas. LNG is produced by cooling natural gas below its boiling point, â??162 �°C (â??259 �°F), and is stored in double-walled cryogenic containers at or slightly above atmospheric pressure. It can be converted back to its gaseous form by simply raising the temperature. Natural gas is a hydrocarbon mixture consisting primarily of saturated light paraffins such as methane and ethane, both of which are gaseous under atmospheric conditions. The mixture also may contain other hydrocarbons, such as propane, butane, pentane, and hexane. In natural gas reservoirs even, the heavier hydrocarbons occur for the most part in gaseous form because of the higher pressures. They usually liquefy at the surface (at atmospheric pressure) and are produced separately as natural gas liquids (NGLs), either in field separators or in gas processing plants. Once separated from the gas stream, the NGLs can be further separated into fractions, ranging from the heaviest condensates (hexanes, pentanes, and butanes) through liquefied petroleum gas (LPG; essentially butane and propane) to ethane. This source of light hydrocarbons is especially prominent in the United States, where natural gas processing provides a major portion of the ethane feedstock for olefin manufacture and the LPG for heating and commercial purposes.

Light Cycle Oil (LCO) is a diesel boiling range product from� fluid catalytic cracking� units. flexible process to process LCO into desired products such as very-low sulphur diesel and high- octane high-aromatics naphtha. It is a light lubricating oil that is suitable for use on bicycles and similar equipment. It is a diesel boiling range product� from fluid catalytic cracking units. Light cycle oil is a poor diesel fuel blending component. LCO are produced at the bottom of the fluidized catalytic cracking (FCC) process in a refinery and are enriched with� 50-80 wt% heterocyclic aromatic compounds, 3 wt% S, and 600 ppm N.

Crude oil is a naturally occurring, unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds. It is the raw material that is used to produce a variety of refined petroleum products, including gasoline, diesel fuel, and heating oil. Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products. Crude oil has a wide range of physical properties. Crude oil is made up of 84.5% carbon, 13% hydrogen, 1â??3% sulfur, and less than 1% each of nitrogen, oxygen, metals, and salts. REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions. It is a high-quality crude oil that is known for its low sulfur content and low viscosity. The middle east light crude oil is also high-quality crude oil. The GOST 51 858-2002 specification refers to the Russian standard for REBCO, which outlines the crude oils characteristics and performance requirements. Gost 51 858 2002 offers from exporters, manufacturers, suppliers, wholesalers and distributors globally by price, and quality of the oil. REBCO is an important commodity in the global energy market, and it is carefully regulated to ensure that it meets the necessary standards for safety and performance. Maximum Sulfur Content 1,8% Paraffin Content 6,0%, Maximum Water & Sediment Content 1,2%, Distillation, Weight 21% Up to 200 N min 21, Up to 300 N min 41, Up to 350 N min 50 and Maximum salts content, MG/L 100.

The term bitumen refers to a substance produced through the distillation of crude oil. Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. The two Bitumen grades are 60/70 and 80/100. The difference between 60/70 and 80/100 penetration grade is the penetration range.� Bitumen 60/70 has lower penetration which means it is harder than bitumen 80/100. Bitumen 60/70 is better suited for use in hot climates and can withstand heavy traffic loads, unlike bitumen 80/100. According to the ASTM D36 method,� the softening point of bitumen 60/70 is between 49 to 56�°C, and the flash point of bitumen 60/70 is 250 �°C. Another important factor is density. Due to the ASTM D70, the density of bitumen 60/70 is equal to 1.0344. Bitumen Penetration Grade 85/100 is� a standard penetration grade. Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25 C: 60-70 dmm Softening Point: 49-56 C Flash Point: Minimum 232 C Ductility at 25 C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

Bitumen Grade 60/70 is a high-quality, semi-solid petroleum product derived from the distillation of crude oil. Known for its excellent adhesive and waterproofing properties, this grade of bitumen is primarily used in the construction and maintenance of roads, runways, and other infrastructure projects. It is particularly well-suited for hot climates due to its optimal softening point and penetration range, which ensures long-lasting performance even under high temperatures. Key Features: Penetration Grade: 60/70, offering a perfect balance between hardness and softness, making it ideal for road construction. Softening Point: Ensures stability under high-temperature conditions, reducing the risk of road deformation. Adhesive Properties: Excellent adhesion to aggregates, providing strong and durable road surfaces. Waterproofing: Superior water resistance, protecting the pavement from water damage and extending the lifespan of roads. Durability: High resistance to aging and weathering, ensuring prolonged service life of the infrastructure. Applications: Road Construction: Ideal for the construction of high-traffic roads, highways, and expressways. Airport Runways: Ensures smooth and durable surfaces for airport runways, capable of withstanding heavy loads. Paving: Suitable for various paving applications, including urban roads, rural roads, and parking lots. Waterproofing: Used in waterproofing membranes and roofing applications, providing excellent protection against moisture. Specifications: Penetration at 25C: 60-70 dmm Softening Point: 49-56C Flash Point: Minimum 232C Ductility at 25C: Minimum 100 cm Solubility in Trichloroethylene: Minimum 99.0% Specific Gravity: 1.01-1.06 Packaging: Available in drums, bulk containers, or as per customer requirements. Compliance: Bitumen Grade 60/70 meets international standards and specifications, ensuring consistent quality and performance across all applications. Why Choose Bitumen Grade 60/70? Proven Performance: Trusted by engineers and construction professionals worldwide for its reliability and durability. Versatile Applications: Suitable for a wide range of paving and waterproofing projects. High Quality: Manufactured under stringent quality control measures to meet global standards.

ESPO (Eastern Siberia-Pacific Ocean) oil is a premium blend of crude oil primarily exported from Russia. This light, sweet crude has gained significant traction in the global market. ESPO oil is extracted from fields in Eastern Siberia and transported via the Eastern Siberia-Pacific Ocean pipeline. Pipeline: The ESPO pipeline, stretching from Taishet in Irkutsk Oblast to the Pacific port of Kozmino, facilitates the transportation of this crude. ESPO crude has an API gravity typically around 34-35 degrees, classifying it as a light crude oil. It has a low sulfur content, usually between 0.5% and 0.6%, making it a sweet crude. This low sulfur content is advantageous for refining into high-quality fuels with lower environmental impact. ESPO oil is known for its low metal and salt content, further enhancing its desirability for refineries seeking to produce cleaner fuels. ESPO crude often commands a premium price compared to other Russian crude grades like Urals, due to its superior quality and favorable location. Pricing for ESPO oil is typically benchmarked against Dubai/Oman crude prices. Espo has low sulfur content in ESPO oil translates to lower sulfur dioxide emissions when refined, contributing to reduced environmental impact compared to higher sulfur crude oils. Price: FOB $68/$64 CIF $65/$61 Availability: In Stock Origin: Russia / Kazakhstan. For more details contact us.

Bitumen 40/50 represents another grade of bitumen available to our clients, catering to a diverse range of project requirements. As with our other products, the specifications of Bitumen 40/50 are meticulously documented and certified by accredited entities such as SGS or other reputable third-party inspection companies. This rigorous quality assurance process ensures that our clients receive a product that adheres to industry standards and meets their specific needs with reliability and consistency.

Bitumen 80/100 is widely recognized as one of the preferred bitumen grades for various industrial applications, including road construction and other projects. The product's specifications are meticulously documented and certified by reputable entities such as SGS or other third-party inspection companies. This ensures that the quality and performance of Bitumen 85/100 meet stringent industry standards, guaranteeing reliability and efficacy in diverse applications.

Penetration Bitumen 60/70 serves as a vital component in road construction projects. It is specifically engineered for optimal performance in such applications. It is imperative to adhere to the recommended usage guidelines and consult with the supplier before considering alternative applications. The properties and specifications of Bitumen 60/70 are rigorously tested to ensure compliance with industry standards and project requirements.

Flexitank is an ideal packaging for transporting all kind of Non-hazardous liquid goods such as: Oils, Beverages and Liquid Chemicals by sea,railway and road truck. Our Flexitank has following features: -- Quality Management System ISO 9001 2000, ISO 22000-2005 supervision, -- Food grade materials FDA, EC standard and Kosher Certificated, -- Customized design and Exactly to Your Specification. -- Global Agency Network and Professional Flexitank Services Team. -- World Wide Insurance Products Liability Insurance. -- Met All the COA(Container Owner Association) Recommended Test Criteria for Flexitank. For more information or need any help, plz feel free to contact us. Thanks!!

Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. Chemical substances additives are added to the base oil to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties.

Oil and Gas Related Plants