Micronized Wax has ultrafine particle size, high melting point, outstanding grindability and smoothness, good recoatability, breathability. Micronized Wax has good mixing compatibility and dispersion. It used in solvent coatings, powder coatings and ink with excellent smoothness, wear-resisting and anti-scratching. Usageï¼? Micronized Wax has good compatibility with ink and coating system. It is widely used in wood coatings, plastic coatings, powder coatings, coil coatings, UV light curing coatings, etc. Features: - Acts as a degassing agent in powder coatings - Excellent anti-blocking and slip properties - Good scratch resistance properties - Increased matting - High water repellent effect - Improved sand-ability of wood coatings - No influence on the transparency of polymers - Excellent dispersion and lubricating properties in plastics applications We can produce micronized waxes with melting point at 52-325, and hardness at 0.5-15dmm.
Specifications: Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05 Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49 Viscosity Index 115 120 130 137 137 Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845 Pour Point deg C -27 -24 -18 -15 -12 Flash Point deg C 170 190 220 235 255 Evaporation Loss noack method %M/M - - 12.5 6.8 3.5 Apparent Viscosity by CCS @-30 deg C mPas - - 1400 3700 8000 Sulfur mg/kg
Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05 Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49 Viscosity Index 115 120 130 137 137 Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845 Pour Point deg C -27 -24 -18 -15 -12 Flash Point deg C 170 190 220 235 255 Evaporation Loss noack method %M/M - - 12.5 6.8 3.5 Apparent Viscosity by CCS @-30 deg C mPas - - 1400 3700 8000 Sulfur mg/kg
Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05 Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49 Viscosity Index 115 120 130 137 137 Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845 Pour Point deg C -27 -24 -18 -15 -12 Flash Point deg C 170 190 220 235 255 Evaporation Loss noack method %M/M - - 12.5 6.8 3.5 Apparent Viscosity by CCS @-30 deg C mPas - - 1400 3700 8000 Sulfur mg/kg
Kinematic Viscosity @100 deg C mm2/s 2.3 3.05 4.35 6.18 8.05 Kinematic Viscosity @40 deg C mm2/s 7.5 12 20 34 49 Viscosity Index 115 120 130 137 137 Density @15 deg C g/ml 0.823 0.825 0.832 0.844 0.845 Pour Point deg C -27 -24 -18 -15 -12 Flash Point deg C 170 190 220 235 255 Evaporation Loss noack method %M/M - - 12.5 6.8 3.5 Apparent Viscosity by CCS @-30 deg C mPas - - 1400 3700 8000 Sulfur mg/kg
HDPE WAX available monthly 100 Mt for more details feel free to contact us at
We are direct refinery at Russia and can supply various petroleum and gas product origin from Russia. D2, JP54, D6, Jet A1, Bitumen, LNG, LPG, Euro 2/4/5/6, HSD, AGO, LCO/ESPO, etc oil and gas product.
We are a UAE based company with oil production facilities in the vicinity of the UAE. Our company provides all kinds of oil products around the world on a monthly basis, Our Furnace oil Specification: Flash Point °C below zero *Density - Kg/l 0.7495 *Destillation - °C IBP 52. °C FBP 260 * IBP - °C 45 * FBP - °C 265
We are a UAE based company with oil production facilities in the vicinity of the UAE. Our company provides all kinds of oil products around the world on a monthly basis, We have adequate experience to deliver to you a High Caliber of furnace oil. Quality: Flash Point - B �C 84 *Density - Kg/l 0.9299 *Sulphur Content - %m 1.91 *Viscosity, Kinematic - mm2 /s 33.89 Port for shipping Dubai Shipping method FOB Kindly contact us: Shushrut Pattiwar Business Development Executive Mobile: +971-503027445 Phone: +971-48769366 Email: marketing@gulfenviro.ae Gulf Environment & Waste FZE
We are a UAE based company with oil production facilities in the vicinity of the UAE. Our company provides all kinds of oil products around the world on a monthly basis,
This oil (also known as heavy oil, marine fuel or furnace oil) is a fraction obtained from petroleum distillation, either as a distillate or a residue. In general terms, fuel oil is any liquid fuel that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 42 °C (108 °F) and oils burned in cotton or wool-wick burners. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes, and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, i.e., heavier than gasoline and naphtha.
Product Name : Jet Fuel JP54, D2 And D6and LPG and LNG Shipping Terms : CIF Want serious buyer We don't want to waste time without LOI No price 1\Buyer Profile Company if is found 2\LOI In the company sheet showing the specifications, details and method of payment
We successfully purchased jp54 and Jet A1 and are currently selling only to clients who are ready for face to face or video calls this is legit and we dont want time wasters . Also a valid TANK STORAGE AGREEMENT is a must for our compliance
gasoil d2 jet fueal A1 A54 Mazut m100 CRUDE OIL LPG LNG
>> Petroleum Products like - JPA1 and JPA-54 - Russian Virgin Fuel Oil D6 - Russian Export Blend Crude Gost 9965-76 - CST-180 Fuel Oil Russian Origin - Gasoline 87/89/91/93/95 Octane Russian origin - LNG (Liquified Natural Gas) - LPG ( Liquified Petroleum Gas) Gost 20448-90 - Mazut 100 Gost- 10585-75/99 Russian Origin - Russia EN-590 10 PPM - HSD2 Gas Oil L-0.2-62 Gost 305-82 AGO (Automative Gas Oil) - Russia D2 Gas Oil Gost 305-82 >> Copper Cathode Sheets COMMODITY: Electrolytic Copper Cathode (Sheets), Grade A, Cu 99.97% -99.99% ORIGIN: DRC (or any by Sellers choice) CONDITION: LME registered or based QUANTITY: 250 MT as trial, then 5,000 MT/month by delivery schedule QUALITY: Purity 99.97% min CONTRACT LENGTH: 12 months with possible R&E to 60 months LOADING PORT: by Sellers option SHIPPING TERMS: CIF by Incoterms 2015 DESTINATION PORT: PRICE DISC: USD, 15% gross and 12% net, below LME COMMISSIONS: 3%, paid by the Buyer, shared 50:50 SIZE: 914mm x 914mm x 12mm (approx.) (36 x 36 x 0.5) PACKAGING: Cargo On Euro-Pallets CONVEYANCE: 20 MT in 20Full Container Load Gross Weight of 22.2MT INSPECTION: SGS at loading port at Seller expense plus CIQ/SGS/Alex Stewart at discharge port at Buyer expense PAYMENT TERM: for Trial shipment by TT, no 2%PB, for monthly shipments by irrevocable, transferable SBLC with following 2%PB and inspection at discharge port >> Edible Oil Product 1). Crude Sunflower Oil 2). Refined Sunflower Oil 3). Refined Canola Oil >> Grain Products of Russian Origin 1). Wheat Class-3 Human Consumption 2). Wheat Class-4 Human Consumption 3). Wheat Class-5 Animal Feed 4). Barley Animal Feed 5). Yellow Corn Animal Feed 6). White Round Grain Rice Human Consumption >> Sugar ICUMSA-45 >> X-Ray Technology >> Solar Energy Solutions >> Weather Control Technology >> Eco Friendly Solid Waste Management >> Micro Wave Sterile of Milk
We Deal in all Grades of Base Oils both in Virgin and Recycle
Quality: Flash Point - B °C 84 *Density - Kg/l 0.9299 *Sulphur Content - %m 1.91 *Viscosity, Kinematic - mm2 /s 33.89 Port for shipping Dubai Shipping method FOB
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Master-batch, Road Marking Paint PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Test Method Specification Drop point ASTMD3954-94-2004 107 Viscosity,mm2/s at120 ASTM D445-2009 11.3 Viscosity,cps at140 Brookfield 6.7 Penetration,0.1mm/100g,5s @25 ASTM D1321-2010 3.8 Oil content ASTM D721-2006 3.2% Size,40mesh GB/T 6005-2008 92%
Usage :Fischer-Tropsch Wax for Hot Melt Adhesive, PVC, Master-batch, PVC Stabilizer, Road Marking Paint PACKING :25 KG Valve bag / 980KG Jumbo bag Properties Unit Specification Solidifying point 100-109 Drop point 110-119 Viscosity mm2/s at120 18-35 Penetration 0.1mm/100g 5s at 25 Max.2 Oil content % wt Max.0.2 Size,16mesh - 85%
Advantages: 1. This product can completely replace domestic paraffin and suitable for particle board production process. 2. This product can effectively enhance particle board waterproof moisture absorption performance. 3. This product can prevent the particleboard when facing agglutination adhesive solution excessive infiltration phenomenon. 4. The product is powder state, facilitate feeding and subsequent processing, energy conservation, environmental protection, customers can save 30% of the cost of production. 5. We can provide customers with professional custom emulsification of form a complete set of product solutions.
