There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.
Soy wax is a vegetable wax made from the oil of soybeans. After harvesting, the beans are cleaned, cracked, de-hulled, and rolled into flakes. The oil is then extracted from the flakes and hydrogenated. The hydrogenation process converts some of the fatty acids in the oil from unsaturated to saturated. This process dramatically alters the melting point of the oil, making it a solid at room temperature. The leftover bean husks are commonly used as animal feed. Adding appropriate beeswax can increase the hardness of the finished wax Animal oil and fat extracted from honeycomb nest, granular, good toughness, suitable for mixing with other waxes, melting point 65 degrees Celsius, can also be used to make difficult silicone mold wax alone.
Urea n46, diesel en590 10ppm, jet fuel a1, dap, basalt fiber products, nitrocellulose.Import and export of goods and technology
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
Daily chemicals, agrochemicals, fertilizers, industrial chemicals, petrochemicals, food additives, water treatment chemicals, etc..
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Petroleum and chemical products.
Pbt, pet, tpee, pbs, eps, bdo, polyurethane, ptmeg, thf, gbl.
Vinyl end phenyl silicone oil CAS No. 68951-96-2 Chemical structure: Vi(CH3)2SiO[Si(CH3)2O] M [Si(C6H5)2O]mSi(CH3)2Vi Product model: KKM-1527 Performance indicators: (appearance, clear and transparent, no odor) (viscosity (25), 3050mPas) (phenyl content, 35%(mol)) (refractive index 1.53) (vinyl content 0.78%) (volatile content 0.92, (150, 3h) %) (The above is a typical index, the company can also be customized according to customer requirements of various viscosity specifications end vinyl silicone oil) This product is mainly used for manufacturing high-power LED silicone packaging adhesive, filling, sealing, bonding and coating in photoelectric, electronic and micro-electronic industries, high light transmittance, high hardness lenses and other uses developed by users themselves. Matters needing attention The product should be prevented from moisture immersion during storage and use. This product should not be mixed with other oils in the process of use so as not to affect the use effect. Package is installed 5kg, 20kg, 200kg plastic drum
Viscosity (25, mpa.s) can be customized Vinyl content (%) can be customized End vinyl silicone oil Technical indicators: Appearance colorless transparent liquid Viscosity mPas 200�±30 500�±50 1000�±100 5000�±500 10000�±1000 20000�±2000 60000�±6000 Vinyl mol% 1.9 1.2 0.8 0.45 0.36 0.29 0.22 Volatile % 1.5 The above is a typical index, the company can also be customized according to customer requirements of various viscosity specifications end vinyl silicone oil High vinyl silicone oil Technical indicators: Appearance colorless transparent liquid Viscosity mPas 3000�±300 10000�±1000 85000�±8500 Vinyl mol% 10 3.0 5.0 Volatile % 1.5 The above are typical indicators. The company can also customize various viscosity specifications and high vinyl silicone oils according to customer requirements
1, high softening point, low viscosity, large molecular weight, small heat loss, small odor. 2, has a strong external lubrication effect, compared with ordinary conventional polyethylene wax, more delay plasticization, reduce torque. 3, with easy dispersion, improve product gloss. 4, good compatibility, anti-precipitation. 5, good demoulding, good metal stripping, long continuous production time. 6, late thermal stability is good, does not contain oligomers, paraffin and so on. No precipitation, no migration. 7, environmental protection, through ROHS, heavy metal testing.
1. Product Introduction: This product is belong to C9 category. It has the properties of good mutual solubility, water resistance, ethanol resistance and chemical resistance. It has good chemical stability over acid and alkali, good adhesive strength and good thermal stability etc. 2. Application: This product is suitable for paint.
GLPOLY Thermal Gel Provides Equivalent Performance To Fujipoly SPG-30B, Only GLPOLY Promise. Many rivals claimed that their products were alternative to other brand of products, especially the top class ones, so it seemed like it was very easy to find an analogue in local Chinese market. But in reality, customer could not find a appropriate one from dozens of anologues, for example, one product had a good thermal properties but the physical properties unqualified. GLPOLY thermal interface materials provided excellent integrated performance which was comparable to world class brands. A power supply company contacted me and asked if we can provide an anologue of Fujipoly SPG-30B, I said it was available. â??Donâ??t get so definite yet, though thermal conductivity of Fujipoly SPG-30B was 3.0W/mK, it was not very high, we still could not find a similar product with appropriate flow speed and high reliability, I had tested several products already.â?? I understood what customer concerned about. Definitely, Fujipoly SPG-30B was excellent thermal putty with high performance and reliability. GLPOLY studied this material three year ago and launched thermal gel XK-G30 which provided equivalent performance and properties. I received lots of feedback that most of anologues could provide similar thermal performance but failure to flow speed or dispensing process. According to customerâ??s application requirements, I recommended thermal gel XK-G30 and suggested customer test samples in real conditions. Test lasted for four weeks in high temperature, changes of parameters of GLPOLY XK-G30 thermal putty were within 5%, definitely GLPOLY XK-G30 could substitute for Fujipoly SPG-30B. Customer satisfied with XK-G30 and promised to push product switching asap. We havnâ??t had quality complaint for two years since we started business. GLPOLY had introducd automated production lines to eliminate human error and keep consistency of products. GLPOLY has partnered with NIO Auto, GAC New Energy Auto, Freetech, dJI etc top class brands for years, and is able to competing with world class brands, and strived to exceed world class brands.
GLPOLY performance thermal gel has features and benefits: 1. GLPOLY Thermally conductive adhesive has bonding strength 8MPa, bonding strength of competitive products is less than 5MPa; 2. Particle size is as small as 1�¼m, 30% smaller than peersâ??, filling rate is 20% higher than that of peers; 3. Supplied in one-component, non-curing, wetting-out interface, decreasing thermal resistance; 4. Compatible with high volume, automated dispense processes; 5. Conforms under low pressure, decreasing stress on component thus decreasing component failures; 6. The first one that imports automated production lines, eliminating human error;
Classification: Carboxylic Acid CAS No.: 112-80-1 Other Names: soyabean oil residue Place of Origin: Liaoning, China Grade Standard: Industrial Grade Purity: 99.7% Appearance: Black & Dark Brown Viscous Liquid Application: machinery produce , fat oil , elding oil Brand Name: DLDP Model Number: DLDP Apperance: Black & Dark Brown Viscous Liquid Acid Value: 46-55mgKOH/g Saponification Value: 155-178 mgKOH/g Moisture: 0.3% Max Moisture & Impurity: 0.5% Max
Greatland Chemicals, one of the biggest paper chemicals manufacturer from China. We produce AKD wax with high purity 91%min, 2% higher than others in the market. Quality can compete with Kamira with better cost performance. We can help you to establish AKD emulsion production lines. Based on our advanced technology and professional service. We have helped more than 40 customers establish AKD emulsion production lines.
CAS: 8030-30-6 EINECS(EC#): 232-453-7 Molecular Formula: C6H6 abby(at)gxsjjck dot cim erin(at)gxsjjck dot cim Formula Weight: 78.11184 Appearance: Reddish-brown mobile liquid Hazard Class: Quality standard: USP Version: May 03 2020
Clary sage oil Product: clary sage oil thujone 60% by gc Botanical resource: salvia sclarea l. Plant description: a bitter, astringent, warming herb. Anti-spasmodic, digestive, nervine, stimulates the uterus and estrogen production. Controls vomiting and is traditionally known as an aphrodisiac. The common name clary, 'clear eye', comes from the folk medicine use of the plant's mucilaginous seeds to reduce inflammation of the eye. In germany the plant is called muskateller salbei. It has been used as a flavoring in muskatel wine. Product colour: off-white to amber colored solid, the odor has a faintly woody characteristic, balsamic and amberlike. Uses Clary sage oil is calming to the nervous system, particularly in cases of depression, stress, insomnia and deep seated tension. It furthermore is a good tonic for the womb and female functions in general, such as painful periods, scanty menstruation and relaxation during labor, thus encouraging a less painful birth. During menopause, clary sage oil can help reduce hot flushes, night sweats, palpitations, irritability, as well as headaches and dizziness 25kg/drum
LinTon X series engine is specially developed for the needs of fixed wing aero-jetaircraft with stable performance and features1, ECU control system: built-in system to solve the trouble wiring way and improve the systemstability, one button/one bar start, convenient and fast.2, brushless start system: start mute, start fast.3, brushless oil supply system: brushless oil pump, low vibration, stable oil supply, uniformacceleration.4. Ground handling monitoring system: 3.5-inch touch color screen, clear image and convenientadjustmentã??5. Engine material selection: the material selected is aviation grade, not stainless steel, bearing isimported from Germany GRW original package. Note: when installing or uninstalling the engine, hydraulic system (including engine inlet oil, oil pump in andout of the mouth, tubing) when there is no connection, must be in a closed state.Otherwise tiny materialinto the engine or pump, cause other problems such as lower oil plug cannot be started life Warm promptIf the oil pump is stuck due to the impurities inhaled, please send it back for maintenance orcontact the manufacturer to remove the impurities by yourself.When the new machine is installed, the oil tank and tubing must be cleaned carefully. The outletof the oil pump must be filled with oil filter.When removing the engine, oil pump or feed system, a smallsection of tubing must be used to seal and plug to prevent impurities from entering the engine or oilpump.Even very small amounts of impurities entering an engine or pump can lead to clogged fuel linesand unexplained stalling.The main factors affecting engine life are: dirty fuel, illegal operation, excessive temperaturecaused by extreme use.Heavy drop, power off, heat dissipation by manual meansAfter starting the engine, the power should be cut off after heat dissipation. If the power is cut off,heat dissipation will directly affect the life of the bearing.Before starting, carefully check whether there are other foreign matters before the engine air inlet.Once the engine inhales or falls into foreign matters, it may lead to blade damage or even explosion. Ifthe blade is damaged, it should be returned to the factory for cleaning, maintenance and dynamicbalance, otherwise the engine life will be affected.Check oil filters and other equipment regularly when using the engine.Check whether all theconnectors are correct before power on!The circuit board will burn if the power is connected in reverse.
