Speciality
The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels
Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C.
All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels.
Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�°C (86�°F) to approximately 200�°C (392�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
MARINE GAS OIL (MGO) describes marine fuels that consist exclusively of distillates. Distillates are all those components of crude oil that evaporate in fractional distillation and are then condensed from the gas phase into liquid fractions. Marine gasoil usually consists of a blend of various distillates.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. The most important thing when grading this fuel is the sulphur content.
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Carbon Black Feedstock is a complex mixture of hydrocarbons produced as the residual fraction of distillation products from catalytic cracking process. It consists of hydrocarbons having carbon umbers predominantly >C20 and boiling above 662 F / 350 C The AS description of this stream states that it is likely to contain < 5% 4 to 6-membered condensed ring polycyclic aromatic hydrocarbons.
We offer Carbon Black Feedstock of Ukrainian/Russian origin as well as Iranian origin. For inquiries please contact us, or send your LOI/ICPO directy to contact(at)altorathgroup.com.
Scope
This instrument conforms to sh / t0093 and astm d2276 m1l-t-5624n standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants.
Features
1, the instrument for the desktop, stainless steel control panel, ceramic coating;
2, digital timer, fengming alarm;
3, the evacuation time can be set arbitrarily;
4, low noise pump;
5, the standard glass fittings, conforming to astm standards;
6, using molding and metal clamp;
Technical parameters
1. Filter: vacuum pumping
2, vacuum degree: 80kpa
3, machine power: 500w
4, the working units: a standard filtration system
5 power supply: ac220v / 50hz
6. Timing: digital timer
Fds-1401 petroleum wax penetration tester
Scope
Petroleum wax penetration tester applies gb/t4985-84 "petroleum wax needle penetration assay", also applies to astm-d1321 "petroleum wax needle penetration test" and iso3992 "petroleum wax needle penetration test". Petroleum wax penetration test is a multipurpose common type, with automatic control devices and with a special needle into the standard petroleum wax pieces. It can be petroleum wax penetration test, with the relevant standards penetration member, it can also be used to verify the test substance and cheese, sugar gum, butter, cream, fermented solid body, fine powders of colloidal, freeze the like other food raw materials.
Features
1, the time controller with digital display, control time range: 0 to 9 minutes and 59 seconds, accuracy: ± 0.1 seconds.
2, the digital display depth measuring mechanism, easy to use, good repeatability, high accuracy.
3, the maximum measurable penetration value of not less than 620, can adapt to various test requirements.
4, stents were pointed needles move quickly and fretting two easy alignment of the test operation of the sample surface.
5, stand there with even self-locking function can be securely anchored anywhere.
6, with the table horizontal adjustment mechanism, easy to adjust.
7, with a manual release mechanism of the penetration member, when not in use to ensure that the release time of the automatic control, able to operate normally.
Scope
Asphalt ash analyzer in accordance with the requirements of the standard sh/t0422 designed and manufactured for the determination of ash content in the asphalt.
Features
1. With integrated design, easy operation and maintenance;
2. With pid temperature control temperature control, high precision, and stable;
3. Asphalt ash analyzer using ceramic fiber materials, better insulation.
Technical parameters
1. Power supply: ac220v ± 10%; 50hz;
2. Furnace (heater) heating power: 2400w;
3. Furnaces (box furnace): heating temperature 900 ± 25 °c, rated power 2500w;
4. Heating method control: manual control switch;
5. Ceramic crucible: 50ml, 100ml.
Scope
Application range: the engine coolant corrosion tester specifically designed and manufactured according to the standard astm d1348 and sh / t 0085. Provides for glassware, corrosion of engine coolant typical metal specimens was measured in the laboratory under controlled conditions.
Features
1. Integrated design, simple operation;
2. Automatically prompt overflow design, full of water;
3. Rapid sealing valve design, to facilitate the replacement of the bath;
4. Engine coolant corrosion tester test cup quick plug design, fast, stable, safe;
5. Using the precision flow meter control flow, the user at any time adjustable;
6. With professional air pump gas supply, stable airflow, noise-free;
7. Embedded drying system, replacement desiccant convenient, beautiful.
Technical parameters
1. Input power: 220v ± 10% 50hz;
2. Heating power: 2000w;
3. The heating medium: glycerin (glycerol), or a flash point greater than 100 ° c heating oil;
4. Test holes: 4 holes;
5. Time: automatic timing;
6. Ambient temperature: 5 to at 35 ° c;
7. Relative humidity:
Scope
Grease evaporation tester applied standards: sh/t0337.
The instrument is suitable for the determination of grease evaporation. When used to hold a certain amount of grease evaporating dish, placed inside a special thermostat at a predetermined temperature for 1h, the mass loss was measured.
Features
1. Heated steel cake bs80 × 10mm surface of a recess of a thermometer inserted;
2. Six steel evaporating dish 22 × 1 × 0.3 × 1mm engraved mark number;
3. The spring thimble using leveraged, the operation is very light;
4. Electric hot plate heating method and no fire;
5. Varnish has formed at the bottom of intake;
6. High temperature resistant glass viewing window;
7. Microcomputer temperature controller, digital display, precision ± 1 °cpt100 sensor;
8. Digital timer, recording test time.
Technical parameters
1. Applied standards: sh/t0337;
2. Timing mode : digital timer;
3. Heating method : electric hot plate heating method ;
4. Total power: 500kw;
5. Temperature control: digital pid temperature controller;
6. Mounting: spring thimble;
7. Measuring range: room temperature ~ 400 °c± 1 °c;
8. Power supply: ac220v/50hz.
Scope
Applicable standards: sh / t0068 astm d1122
The instrument with the state standards and the american society for testing and materials standards development, measured by density meter and engine coolant concentrate density or relative density instrument using split structure, convenient operation, greatly improving the work efficiency.
Features
1. Engine coolant density meter uses the integrated design, easy operation and maintenance;
2. Engine coolant density meter with pid temperature control and high precision, stable;
3. Engine coolant density meter uses imported compressor refrigeration, cooling capacity, no noise;
4. Engine coolant density meter uses the results of the double bomb, to facilitate the operation of parallel experiments.
Technical parameters
1. Digital thermostat: 20 °c± 0.2 °c;
2. Cooling: compressor cooling;
3. Heating: electric tube heating;
4. Mixing method: motor agitation;
5. The kind of unit: two holes;
6. Power: ac220v/50hz.
32760 Petroleum And Oil And Related Products Importers And Buyers Suppliers
Short on time? Let Petroleum And Oil And Related Products Importers And Buyers sellers contact you.
