Scope
Kerosene smoke point tester is based on the standard gb / t382-83 (91) "determination of the smoke point of kerosene" design and manufacture. The maximum height for the determination of the lamp with kerosene and jet fuel smoke point, that the sample in a standard fixture, smokeless flame under specified conditions of, expressed in millimeters.
Features
1, kerosene smoke point tester uses millimeter scale background, you can clearly read the data
2, the entire instrument is compact structure, complete
3, kerosene smoke point tester using plug-type structure, more convenient to replace the wick
4, kerosene smoke point tester using a special glass observation window, easy to operate
5, kerosene smoke point tester simple operation, high measurement repeatability
Technical parameters
1, the scale: ruler should on the black glass with white flags, their white or black stripes central 2 mm will be divided into bisecting vertical ruler. Ruler measuring range should be 50 mm, 1 mm division. Every 10 mm on the digital standard, with each 5 mm long marking.
2, wick catheter: top wick catheter should be exactly at the same level with the zero on the scale.
3, the lift base: total distance of not less than 10 mm stroke, moves smoothly and evenly.
4, ? reservoir oil: oil reservoir mainly by oil storage body, wick pipes and air ducts, etc., whose critical dimensions conform to gb / t382, oil storage body diameter size ?21.25 ± 0.05, length of 109.0 ± 0.05; wick tube diameter ?4.7 ± 0.05, length of 82.0 ± 0.05; air duct diameter size ?3.5 ± 0.05, length of 90.0 ± 0.05.
Scope
Lubricants determination of aging characteristics is based on the requirements of sh / t0192 gb / t12709 test method for design and manufacture. Determination of aging characteristics suitable for the lubricating oil.It includes two methods: a method: through air aging conradson carbon value method. Method b: in the presence of ferric oxide through the air after aging conradson carbon method.
Features
1, the instrument consists of a temperature control section, part of the metal bath, air flow regulator components.
2, the control circuit uses digital temperature control table, high precision temperature control, display accurate.
3, the heating body is made of aluminum bath, and an insulating layer and the insulating protection, rapid heating.
4, the actuator using solid state relays ssr, with no contact, no action noise, no spark, long life and other characteristics.
Technical parameters
1. Input power: 1000w
2. Power supply: ac220v / 50hz
3. Test temperature: 200 ?
4. Temperature accuracy: ± 0.5 ?
5. Temperature range: room temperature ~ 200 ?
Scope
Engine coolant foam tendency analyzer according to people's republic of china petroleum and chemical industry standard sh / t0066 requirements "of the engine cooling foam determination" provides design.
It is applicable to the determination method according to sh / t0066 standard,
It can be measured diluted or concentrated engine cooling liquid foam.
Features
1. Integrated design, easy to operate;
2. With automatic timing device, easy to operate, can also set up their own;
3. Using quick water valve design, to facilitate the replacement of the bath;
4. Test cup quick plug design, fast, stable, safe;
5. Using the precision flow meter control flow, the user at any time adjustable;
6. Using a professional air pump gas supply, stable airflow, noise-free
7. The engine cooling liquid foam tendency analyzer embedded drying system, replacement desiccant convenient, beautiful.
Technical parameters
1. Power supply: ac220v ± 10%, 50hz;
2 .Heating power: 2000w;
3. Air flow: precision flow meter control;
4. Measuring range: room temperature ~ 99.9 °c;
5. Time: automatic timing, you can set your own;
6. Ambient temperature: -10 ~ +40 °c;
7. Relative humidity: 85%.
Scope
Petroleum wax oil content analyzer is designed and made as per the national standard of people’s republic of china gb/t3554 and sh/t0556-93 standard “test methods for oil content of petroleum wax" (mek - toluene)
Features
1, imported compressor refrigeration, a total of four cold trough, can be grouped on two samples tested
2, using a standard glass tube, to meet gb / iso requirements
3, the cold bath and the water bath temperature regulation and control of evaporation are used in digital temperature controller, precise temperature regulation and control.
4, evaporation plant air flow by the glass rotor flowmeter detector, can be precisely controlled flow, blowing time according to the time test requirements arbitrarily set by a timer within 60min.
Technical parameters
1. Power supply: ac 220v±10%, 50 hz
2. Temperature of melting bath: room temperature~90±5°c
3. Cold bath temperature: -35°c±1°c
4. Evaporation temperature: 35±1°c
5. Flow rate: 2~3l/min
6. Timing range: 0~60min
Scope
Applied standards: SH/T0109, ASTMD1264, IP215
Applied scope: testing grease resistance to water.
The grease sample loaded ball bearings, ball bearings and the bearing sleeve is provided with provisions within the gap, and turn to 600r/min + 30r/min speed. The control water in 38 DEG C or 79 DEG C to speed spray of fixed at 5ml / S + 0.5mL/s in the bearing sleeve, to within 60 min by water to wash away the grease quantity to measure the anti leaching ability of water of the grease.
Features
1. Water Washout Characteristics of Lubricating Greases is mainly composed by the temperature control system, water spray circulatory system, the transmission mechanism, white molten steel bath and shell Circulation system includes constant velocity carbon bearing gear pump, valves and flow meter directing a controlled water flow to a capillary (1mm) spray nozzle aimed at the bearing housing. Rugged 1/3hp drive motor rotates test bearing at600rpm while driving the circulation pump. A two pulley system permits independent pump operation to circulate water while heating it to test temperature. Mounted on a finished steel base with locating;
2. Using PID temperature control system thermostatic bath temperature control, temperature control range from room temperature to 100°C, a temperature control accuracy of ± 2 °C;
3. Visual display of set temperature and the actual temperature, easy temperature setting and the temperature difference correction;
4. The water spray circulatory system imported miniature magnetic circulation pump, low noise, long hours of continuous work;
5. Grease resistance to water washout analyzer transmission mechanism from the motor through a belt driven set of the bearing assembly;
6. Design aesthetic appearance, generous, reasonable structure design, easy to operate, the measurement accuracy of the results.
Technical Parameters
1, digital temperature control, temperature control range: bath temperature to 100°C, the temperature control precision is + - 1°C
2, precision velocity control system of water jet flow: 5 + 0.5ml/sec
3, bearing speed: 600 + 30r/min, specifications: 204 type bearing
4, input power: 1000W
32786 Petroleum And Oil And Related Products Importers And Buyers Suppliers
Short on time? Let Petroleum And Oil And Related Products Importers And Buyers sellers contact you.
Scope
Petroleum product sulfur content analyzer (x-ray spectroscopy) is in accordance with people's republic of china standard gb / t11140, gb / t17040, astm d4294 requirements specified in design and manufacture of this instrument for the determination of trace sulfur content of petroleum products. Because it uses physical analysis methods, with fast analysis without complicated sample pretreatment, high precision, human error is small, low labor intensity of operators, no pollution, it has been widely used and generally replace other measuring sulfur in the international arena the analytical method.
Features
1, with full english operating system, the man-machine interface friendly exchanges.
2, short detection time, automatic test results within 30 seconds; automatic c / h ratio correction, for a variety of samples;
3, large-screen lcd, automatic print measurement data;
4, using the x-ray tube excitation, the instrument can be long-term use, without affecting the source attenuation;
5, the use of physical methods, the analysis does not touch, do not destroy the sample, no chemical reagents;
6, instrument with integrated design, easy maintenance;
Technical parameters
1, the scope of analysis: s analysis range can be adjusted by the calibration curve of the selected method.
2, the scope of analysis width: s% max-s% min=9.999%; such as oil: s: 0.001 ~ 9.999%.
3, the inherent error, accuracy of analysis: such as oil: in line with the national standard gb / t 17040, at the same time meet the relevant requirements of american national standard astm d4294.
4, system analysis time: 1 to 999 seconds, the recommended value of 60 seconds.
5, detection limit: 10ppm
6, using the conditions: ambient temperature: 5 ~ + 40 ?, relative humidity: =85% (30 ?), power supply: 220v ± 20v, 50hz.
7, total power consumption:
Scope
FDQ-0301 laser particle size analyzer based on physics Fraunhofer diffraction and Mie scattering theory basis. This theory can be simply understood as: travels in straight lines parallel laser beam blocking particles encountered in the communication process, the phenomenon of diffraction and scattering, and small angle light scattering large particles, small particles of light scattering angle is large.
Figure 1-1 shows the diffraction pattern formed by individual particles, the larger the particle diameter, the smaller the center of the bright ring, the smaller the particle diameter, the larger the center of the bright ring. Use photo detector array receiving light at different angles, for the corresponding angle, its energy is set corresponding to the diameter of the particles occurs diffraction (scattering) caused by the respective other angle light will reflect the strength of the corresponding diameter of the particles throughout the assembly of particles occupies proportion, according to the intensity of the received scattered light at different angles, you can perform anti-particle distribution of the sample between the relative content and various size fractions.
Features
1. Up to 82 sampling channels to improve the resolution of the test results; all the photovoltaic device fabricated on a single silicon chip, to ensure the life of the photovoltaic array; cross-sector arrangement, increasing the light receiving area, improves the sensitivity ;
2. micro injection method, using a peristaltic pump automatic loop injection mode, using siphon pump automatic cycle injection mode, to meet different customer test requirements, the instrument comes standard MS-01 micro-injector device;
3. The single lens full scale measurements, all optical components are mounted on reinforced base before fastening a good optical system is shipped, the instrument more stable performance;
4. Imported semiconductor lasers, has a long life, stable optical parameters, not afraid of vibration and a series of advantages, continuous working time of up to 24 hours, to meet user requirements for large continuous load test.
Technical Parameters
1, the test range (um): 0.15-400; (0.4-1100,0.1-450,0.25-650, 0.4-1100)
2. Repeatability:
Scope
The instrument used by the gb / t265-88, iso3104, astmd445, ip71 requirements, determination of liquid petroleum products (newton liquid) kinematic viscosity in units of m2 / s, usually mm2 / s in practice. Dynamic viscosity of the liquid at a constant temperature measured kinematic viscosity and density of the product at the same temperature of the liquid.
Features
1, innovation introduced the us imports xecom data processing chip, fast and accurate data processing
2, large-screen lcd display, english prompts input interface, easy operation, quick
3, automatic detection, automatic extraction experiment, automatic detection, automatic calculation, automatic storage,
4, fld special photoelectric detection system, high-precision test results
5, configuration, self-diagnosis and protection function, easy maintenance
4, the detection member is a separate standard configuration, ready to install and uninstall detection unit for easy inspection, cleaning, storage and future upgrades
Technical parameters
1, display: tft true color large screen display
2, the detection system: fld special detection equipment, high temperature resistance, corrosion resistance, high stability
3, chip processing: us chip imports xecom
4, detection method: an infrared detector, automatic detection
5 power supply: ac 220v ± 10%, 50hz
6, temperature control point: 40 ?, 50 ?, 80 ?, 100 ?, temperature control accuracy: ± 0.1 ?
7, the results of printing: automatic print report
Property / tests, Unit,Limits
Ash content, Mass %,0.01 max
Cetane index, Number,48 min
Colour, astm, Number,2.5max
Cu corrosion / 3 hr @ 100 ,c number,1.0 max
Density @ 15 ,c, Gm / ml,0.820 – 0.860
Flash point, ,c,62min
Water content, Vol %,0.05 max
Distillation recovery
At 350 deg c. Min, ,c,89
Pour point max, ,c,Zero max
Total sulphur, Wt%,0.5 max
Kinematic viscosity at 40 ,c,Cst,2.0 – 5.0
Conradsob carbon residue,Wt%,0.10 max
Total acidity,Mg koh/gm,0.10 max
Sediment % wt. Max,Wt%,.01
Essential details
Place of Origin:
Austria
Brand Name:
White Spirit
Model Number:
White Spirit
Supply Ability
Supply Ability
100 Metric Ton/Metric Tons per Week
Packaging & delivery
Packaging Details
As Customer Demand
Lead time:
Quantity(metric tons) 1 - 1000 >1000
Lead time (days) 60 To be negotiated
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�??�?�°C (86�??�?�°F) to approximately 200�??�?�°C (392�??�?�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
Bulk Quantity
Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
Best Price
Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.
Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!
