For smelters that produce Carbon Anodes, Gremlog provides spent Anodes (Anode Butts) from a variety of smelters with different qualities. Those Anode Butts can be used again as raw material for the production of Anodes. We have a variety of different sizes including : 0-1mm/ 1-4mm/ 4-10mm/ 10-30mm/ 30-50mm/ 50-100mm/ 100-500mm / 100-1200 mm / As per request Carbon Anode FC: 93-96 %
Carbon anode FC 90% -96% , clean , containers will be loaded full capacity
LNG, EN590, Jet fuel A1, D6 diesel etc..from non sanctioned countries of origin, no deposit, no advance payment required, flexible delivery terms,
TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyerâ??s storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyerâ??s TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyerâ??s expense. 6. Upon successful verification of POP or Dip Test in the sellerâ??s tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyerâ??s tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.
Available stock in Rotterdam tank farm for jet fuel A1: CI DIP AND PAY FOB PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include ï?¼ Tank Storage Receipt (TSR) ï?¼ Certificate of origin ï?¼ Statement of Product Availability, ï?¼ Authorization to Verify (ATV), and ï?¼ Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
We can connect you with our friend end sellers/title holders to offer express work with petroleum products of Russian or non-Russian origin, where they can provide reliable and serious offers. Please contact us only if you are the real end buyer or his direct mandate. The products list: - Diesel EN590 - JET FUEL A1, JP 54 - VIRGIN D6 FUEL OIL - LPG, LNG - AGO Automotive Gas Oil - Gasoline Octane 72, 76, 91, 93, 95
Non Russian origin, Jet Fuel A1, FOB Rotterdam or FOB Houston, no advance payment, no deposit, seller able to do tank to vessel & tank to tank Rotterdam or Houston, please
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Raw Activated Carbon Powder can be used for all liquid phase filtration applications. It is commonly used to filter chloramines and organic compounds, including pesticides and herbicides, from drinking water. Additional applications include: * Pharmaceutical * Oil & Gas * Drinking water treatment * Groundwater remediation * Wastewater treatment * Pulp & Paper * Brewery & Winery * Dechlorination/chloramine reduction * Removal of organic contaminants * Taste and odor reduction * Disinfection-by-product (DBP) removal
Name of product-Coconut shell Activated carbon/ Activated carbon/Activated carbon for Gold recovery/Activated carbon for water treatment/Activated carbon for Gas treatment Key Specifications/Special Features: Iodine- 900 to 1400 , CTC - 45 to 100 we can able supply Mesh Size: 4x8,6x12,8x16,8x30,12x40,12x30,20x50,30x60,50x100,50x200, below100 Mesh, 90% Pass Below 200 Mesh, minus 325
Whetlerite carbons are Cu, Cr and Ag impregnated activated carbons used for respiratory protection against super toxic nerve, blister, blood and choking agents in the military. Whetlerite carbons are used in nuclear, biological and chemical (NBC) filters for collective protection, and in NBC canisters, as part of individual gas masks, for personal protection. Flexus Global exports impregnation of active carbon and whetlerite carbon to various countries.
Exhaust gases from several industrial and production units where coal or sulfide ores are used, contain sulfur-containing toxic gases and vapors such as sulfur dioxide, hydrogen sulfide, carbon disulfide, and several organosulfur compounds. These industrial gases need to be desulfurized effectively before mixing with the environment. Sulfur can also be removed with the use of activated carbons. Flexus Global speciality activated carbons are promising adsorbents for SO2 and sulfur-containing toxic gas removal due to their high efficiency and regenerative capacity.
Formaldehyde and other aldehydes are the main pollutants in indoor air. Formaldehydes are mainly obtained from paint, polymerizing plates, bindings, chemical fibers and even cigarette smoke Activated carbon adsorbents are the most promising adsorbents when adsorption of traces of gases and vapors is concerned. Our impregnated activated carbons offer effective chemisorption of formaldehyde from air.
Carbon monoxide (CO) is a very toxic gas with TLV of 35 ppm and it is to be removed from the air in mines, enclosed spaces, fire breaking places. Active carbon can not hold the CO due to physisorption and therefore palladium impregnated carbon was developed which became even more active due to high RH. This again one of the very specialized carbon exported by us for air purification and CO removal. It almost works like the turn over catalyst and offers very high protection against CO. This carbon has High Surface area providing almost offers endless protection against CO, Works in any RH but becomes more active at high RH.
Activated carbon has very high capacity to adsorb organics, inorganics, bad taste and odour material. Adsorption capacity is enhance by modifications such as acid washing because this modification removes the acid soluble inorganic materials from the carbon and make it more porous, efficient and useful for various liquid process applications such as waste water treatment, water purification, decolourisation process in chemical and pharmaceutical industries, food and beverage industry for many purposes such as decolourization of sugar, dechlorination, decaffeination, purification of organic compounds, etc. Some of the benefits of Acid Wash carbon include Dechlorination of water, better taste, removal of bad odors, removal of color from water, removal of organic substances, etc. Available in different mess Size as per customer requirement.
Among its numerous sources, coconut shells have gained significant attention as a sustainable and efficient raw material for producing high-quality activated carbon. Coconut shell-based steam-activated Carbon is mainly used for the removal of chlorine, organic contaminants, color and odor from drinking water to make it suitable for human consumption. Being microporous in internal structure, coconut shell activated carbon is well suited for organic chemical adsorption, including volatile organic chemicals. - One of the prominent applications of coconut shell-based activated carbon is in water treatment processes. It effectively removes impurities, organic contaminants, and heavy metals, ensuring clean and safe drinking water. - It acts as a decolorizing agent, removing impurities and unwanted odors from edible oils, beverages, and food products finding its application in the food and beverage industry. Additionally, it is employed in the purification of sugar syrups, ensuring high-quality and clear syrup for various confectionery and beverage manufacturing processes. - It serves as an excellent adsorbent in the production of drugs, where it eliminates unwanted impurities, colorants, and traces of heavy metals making it ideal choice in pharmaceutical industry too. The high purity and porosity of coconut shell-based activated carbon make it a preferred choice for pharmaceutical manufacturers to ensure product quality and safety.
(Color Taste Odor Removal) - We are leading exporter of Activated Carbon Blocks, made from high Surface Area, low ash coconut based Activated Carbon with high adsorption efficiency and contaminant removal capacity. The CTO Blcks have high adsorptive capacity that simultaneously removes chlorine, bad taste, odor and organic chemicals that contribute to bad taste. They are suitable for use as Pre and Post Reverse Osmosis Systems in CTO BLOCKS (Color Taste Odor Removal) residential and commercial water purification. Size & Diameter can be customised as per buyer's requirement.
CHM REMOVAL BLOCK (Heavy Metal Removal) - Heavy metal (HM) is any metallic chemical element are highly toxic for both animals and human beings, and can be bio-accumulated through biological chains and are non-biodegradable and persistent. Their toxicity may occur due to industrial emission that contaminates waterways, nearby streams and rivers, contamination of irrigation water, the application of fertilizer and metal-based pesticides, harvesting process, transportation, storage, or sale. Elements, such as Cadmium and Chromium, are considered carcinogenic, while Iron, Copper, Manganese, Zinc, and Nickel are considered essential trace elements. Arsenic is also another heavy metal which is available in almost 70% bore well water. Therefore, it is essential to purify the water to make it potable. The conventional methods for heavy metal removal from waste water which includes chemical precipitation, reverse osmosis, and solvent extraction are expensive. Adsorption on adsorbent such as active carbon or modified active carbon is an alternative method, because it is cost effective and simple to design. Size & Diameter can be customised as per buyer's requirement.
One of the main applications of granular activated carbon is the purification of water. Its function is the retention of organic contaminants and the elimination, by chemical reaction, of the free residual chlorine that remains in the water after the disinfection stage. In order to inhibit bacterial growth, the surface of the carbon is impregnated with 0.1% metallic silver to make carbon bacteriostatic using ionic silver to enable it to bind strongly with carbon surface to make it suitable to function and purify large volumes of water. - High efficiency - Negligible silver leaching - No health hazards to humans - No loss in Bacteriostatic property up to 6000 litres water - Available in Granular and block form
To suit the requirements of water purification, modern approach is to filtering huge volumes of water contaminated with many organic and inorganic contaminants but in form of blocks along with reverse osmosis, UV irradiation, mineral addition, etc. Carbon blocks are engineered and manufactured using compression molding or extrusion for different applications such as dechlorination, bad taste and odour removal, chloramines and organic materials removal, VOC removal, heavy metal removal, etc. Carbon blocks provide effective and versatile filtration for a wide range of different applications such as sediment and chemical removal. - Manufactured from coconut shell based low ash, micro porous Activated Carbon. - Designed to be used in most standard size housings. - High adsorptive capacity & high Iron, HMR & VOC removal Capacity - Simultaneously removes chlorine, bad taste, odour and organic contaminants from water. - Provides particular filtration and high dirt capacity. Size & Diameter can be customised as per the Buyers requirements
