Find Verified Petroleum And Oil And Related Products Importers And Buyers Suppliers, Manufacturers and Wholesalers

Base Oil 350 is a type of base oil used in lubricant formulations. Here are some key characteristics:

Specifications
1. Viscosity: 350 cSt (centistokes) at 40 C (104 F)
2. Density: Approximately 0.87-0.89 g/cm
3. API Classification: Typically classified as API Group I or II
4. Applications: Used in various lubricant formulations, such as:
- Hydraulic fluids
- Gear oils
- Engine oils
- Transmission fluids

MOQ: 10,000 Barrels per Month
Supply Ability: 1,000,000 Barrels per Month

JP54 Technical Specifications:

ADDITIVES
Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3

COMBUSTION PROPERTIES
Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM

COMPOSITION
Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952

VOLATILITY
Initial boiling point centigrade max report 123 D 96
10% vol at C 240
20% vol at C report
50% vol at C report
80% vol at C report
End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298

LOW TEMPERATURES PROPERTIES
freezing point centigrade max 40 15 D 1298
Corrosion copper (2hrs at 100 C)
Corrosion silver (4 hrs at 500C) max 1 227

STABILITY
Thermal stability control temp. 280C 323
Filter pressure, differential mm. Hg max 25
Tube deposit rating (visual) max <3

CONTAMINATION
Existent gum mg/100 ml max 7 131 D 361 Water reaction, interface rating max 16 258 D 1084 Fuel whit static dissipater additives min 75 D 3648 Fuel without static dissipater additives min 85

TECHNICAL SPECIFICATION DATA SHEET:

PROPERTY TEST ASTM TEST METHOD
API @ 60 F 30- 45 ASTM D-1298
Sulfur (wt%) max 0.8 ASTM D-4294
BS &W % max 2.0
Paraffins (vol. %) 40 -70 ASTM D-2789M
Naphthenes (vol. %) > 25 ASTM D-2789M
Organic Chloride(ppm) < 1.0 ASTM D-4929
Organic Nitrogen max (ppm) 500 ASTM D-4629
Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530
Light ends C2 iC5 5 % Max
Total Acid Number, mg KOH 0.8 ASTM D-664
Metals by ICP ASTM D-5708
Vanadium <10 ppm
Nickel <10 ppm
Iron <10 ppm
Silicon <10 ppm
Asphaltene wt% 0.5 ASTM D-6560

BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.

Used Engine Oil

Product Description
Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil can be refined to produce usable products such as gasoline, diesel, and various other forms of petrochemicals. It is a� nonrenewable resource, which means that it can't be replaced naturally at the rate we consume it and is, therefore, a limited resource.

Price of product ( USD price or FOB price) :
USD 220 - 230 per MT

Product origin :
Russian

Key Specifications/Special Features :
International Standard

Minimum Order Size and Packaging details :
25000 MT

ESPO (Eastern Siberia-Pacific Ocean) oil is a premium blend of crude oil primarily exported from Russia. This light, sweet crude has gained significant traction in the global market.

ESPO oil is extracted from fields in Eastern Siberia and transported via the Eastern Siberia-Pacific Ocean pipeline.
Pipeline: The ESPO pipeline, stretching from Taishet in Irkutsk Oblast to the Pacific port of Kozmino, facilitates the transportation of this crude.

ESPO crude has an API gravity typically around 34-35 degrees, classifying it as a light crude oil.
It has a low sulfur content, usually between 0.5% and 0.6%, making it a sweet crude. This low sulfur content is advantageous for refining into high-quality fuels with lower environmental impact.

ESPO oil is known for its low metal and salt content, further enhancing its desirability for refineries seeking to produce cleaner fuels.

ESPO crude often commands a premium price compared to other Russian crude grades like Urals, due to its superior quality and favorable location. Pricing for ESPO oil is typically benchmarked against Dubai/Oman crude prices.

Espo has low sulfur content in ESPO oil translates to lower sulfur dioxide emissions when refined, contributing to reduced environmental impact compared to higher sulfur crude oils.

Price: FOB $68/$64 CIF $65/$61
Availability: In Stock
Origin: Russia / Kazakhstan.
For more details contact us.

Wholesale Light cycle oil

Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight.

Primary Characteristics:

Appearance: Typically amber to dark brown liquid.
Odor: Characteristic petroleum smell.
Density: Intermediate, falling between lighter distillates and heavier oils.
Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline.

Applications:

Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.

BASE OIL SN 100-150-300-500-600-700

Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds.

Base oils chemical properties and their impact on the usage of final lubricant:

1 volatility: reduction of the oil, oil thickening, sediments

2 surface activity: foaming, pressure tolerance, air release, emulsion expansion

3 oxidations: sediments, oil thickening, metal oxidation, mud forming

4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling

5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;

Hello Sir/Mam

Thanks for the interest in our Crude oil product
We are able to supply you on a consistent basis

Origin Available

1 Iran
2 Kazakhstan

Payment Terms DLC SBLC BG Sblc via MT760 TT MT103

Specification of Iran light crude oil certificate of origin changeable

CHARACTERISTICS UNITS RESULT TEST METHOD


Specific Gravity1556 1556 08568 ASTM D5002
API Gravity API 336 ASTM D5002
Sulfur Content total Wt 146 ASTM D4294
HS Content ppm 86 IP 570
Mercaptan Content ppm 60 UOP 163
Nitrogen Content total Wt 0l3 ASTM D5762
Water Sediment Vol

Export Blend Crude GOST 51 858-2002 is a high-quality crude oil blend produced according to the Russian GOST standard. Known for its ideal composition and optimal refining properties, it is suitable for producing a wide range of petroleum products, offering excellent performance for refining processes.

Crude oil is a naturally occurring unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds It is the raw material that is used to produce a variety of refined petroleum products including gasoline diesel fuel and heating oil Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products Crude oil has a wide range of physical properties Crude oil is made up of 845 carbon 13 hydrogen 13 sulfur and less than 1 each of nitrogen oxygen metals and salts

REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions It is a highquality crude oil that is known for its low sulfur content and low viscosity The middle east light crude oil is also highquality crude oil The GOST 51 8582002 specification refers to the Russian standard for REBCO which outlines the crude oils characteristics and performance requirements Gost 51 858 2002 offers from exporters manufacturers suppliers wholesalers and distributors globally by price and quality of the oil

REBCO is an important commodity in the global energy market and it is carefully regulated to ensure that it meets the necessary standards for safety and performance Maximum Sulfur Content 18 Paraffin Content 60 Maximum Water Sediment Content 12 Distillation Weight 21 Up to 200 N min 21 Up to 300 N min 41 Up to 350 N min 50 and Maximum salts content MGL 100

Light Cycle Oil LCO is a diesel boiling range product from fluid catalytic cracking units flexible process to process LCO into desired products such as verylow sulphur diesel and high octane higharomatics naphtha It is a light lubricating oil that is suitable for use on bicycles and similar equipment

It is a diesel boiling range product from fluid catalytic cracking units Light cycle oil is a poor diesel fuel blending component LCO are produced at the bottom of the fluidized catalytic cracking FCC process in a refinery and are enriched with 5080 wt heterocyclic aromatic compounds 3 wt S and 600 ppm N