Find Verified Paper Machinery Suppliers, Manufacturers and Wholesalers

Kraft paper making machine is one of the most commonly used equipment at present kraft paper processing, is also a kraft paper processing business people choose up a kraft paper processing equipment, not only on the choice of raw materials have advantages, but also from a certain extent, the increase production and reduce the loss of paper.

Tissue toilet Paper making machine production line
We can design the factory according to the customer's requirement. Customers can use the original paddle board, sugarcane waste or
waste paper, or they can decide the final production's quality which they intend to produce. We provide complete production line of toilet paper roll, which can produce the following kinds of paper.
1.Toilet paper 2. Napkin
3. Facial tissue 4. Hand paper
The paper production line is made up of seven main parts
1.stock preparation system(pulping section)
2.wire section manufacture of paper mills in chain
3.Vacuum press section kraft paper machinery
4.Ordinary press section
5.drying section Corrugated paper machine
6.paper winding section
7.finished paper section

Tissue toilet Paper making machine production line
We can design the factory according to the customer's requirement. Customers can use the original paddle board, sugarcane waste or
waste paper, or they can decide the final production's quality which they intend to produce. We provide complete production line of toilet paper roll, which can produce the following kinds of paper.
1.Toilet paper 2. Napkin
3. Facial tissue 4. Hand paper
The paper production line is made up of seven main parts
1.stock preparation system(pulping section)
2.wire section manufacture of paper mills in chain
3.Vacuum press section kraft paper machinery
4.Ordinary press section
5.drying section Corrugated paper machine
6.paper winding section
7.finished paper section

Tissue Paper making machine
We can design the factory according to the customer's requirement.Customers can use the original paddle board, sugarcane waste or
waste paper, or they can decide the final production's quality which they intend to produce.We provide complete production line of toilet paper roll, which can produce the following kinds of paper.
1.Toilet paper 2. Napkin
3. Facial tissue 4. Hand paper

Kraft paper making machine is one of the most commonly used equipment at present kraft paper processing, is also a kraft paper processing business people choose up a kraft paper processing equipment, not only on the choice of raw materials have advantages, but also from a certain extent, the increase production and reduce the loss of paper.

There are three series of papermaking felts available in the market. They are single layer base mesh,double layer base mesh and triple layer base mesh.According there structures,they can be divided into formed felt, pressed felt, upper felt, dryer felt, pulp board felt and so on.
Our paper making felt include
Single -layer BOM paper making felt
Doule -layer BOM paper making felt
Tri-layer BOM paper making felt
Mark- free paper making felt
Full chemical fibre needled paper making felt
Pulp-making felt
Dryer felt

stainless steel filter basket
Filter Basket/ sieve and filtration mesh in chemical industry
Material: SS316L or SS 304.
Style:Cylindrical
Filter precision:0.5-300 um
Application:
Polyester filtration,
water treatment,
oil filtration,
pharmaceutical industry,
chemical industry,
chemical fiber industry
high temperature media filtration

This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system. 2pcs air-expansion shaft will be delivered together with machine.
The machine owns below features:
Siemens PLC 
WeiLun touching panel.
DuoChuan servo motor
SINNE Inverter
Auto. Tension controller
Taiwan Magnetic powder brake

Our paper bag production line consists two parts, one is paper tube making machine, another is bottom pasting machine. This production line can make 2-4 color printing, bottom valved paper bags. This kind of bags can be used for packing cement, mortar, chemicals materials and other granule or powder materials. Bags can be 2~4 layers kraft paper or clupak paper and one layer of PE material.

HT series paper tube making machine can produce multi-ply paper tube. Material paper reels being unwinding automatically, multi-layers paper tube will be formed automatically. Perforation, tearing down, tension control, deviation rectifying, counting is controlled automatically. A multi-color flexo printing machine is connected with this machine, paper tube can get 2-4 color printing.
HD series bottom pasting machine does pasting work to the paper tube. Bottom of paper tube can be folded automatically and pasted with glue, another end of tube also will be glued and valve patches can be pasted at this end. This machine can paste different kinds of valve patches at the bottom of bag.

Introduction
This machine is used for cutting paper drum into required length.
Specification:
Model FQ-450
Paper Tube Diameter Ï?280mm-Ï?450mm
Work Mode Manual
Speed 200pcs/hour
Motor Power 1.1KW/380V/50HZ/3Phase
Weight ~400KG

Part 1 Equipment introduction
The paper can assembly machine adopts advanced forming process, can complete a variety of forming processes, and can completely replace manual operation procedures.
The equipment has strong stability and high production efficiency, and can one-to-one operation,thus liberating labor force to a large extent.
The equipment has the advantages of saving raw materials and low energy consumption.
Stable structure operation,forming stable and low noise.
It is easier and faster to replace the mold.
Part 2 Advantage characteristics
Solving the problem of multi-manual operation in the traditional flat-bottomed paper can assembly process.
The equipment can automatically complete the labeling, inside curling, sealing, and scraping operations.
With high efficiency, high stability, high quality, assembly work high intelligence, can be unmanned operation and other performance characteristics.

1. Brief description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube, etc.

2. Technical parameter:
Model CM1600
Size of jumbo paper: Max. Width: 1600mm, max. Diameter: 1200mm
Paper grammage 45gsm-800gsm
Core diameter of raw paper roll  76mm
Finished paper size: Min. Width 30mm Max. Diameter of rewind paper roll: 1200mm
Speed 0-60m/min
Blades 20pairs
Power  8.1 KW/380V/50HZ
Weight ~2.5T
Dimension 2300mm X 2000mm X 1500mm
3500mm X 2000mm X 1500mm

1. Brief description
This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube, etc.

2. Technical parameter:
Model CM1600
Size of jumbo paper: Max. Width: 1600mm, max. Diameter: 1200mm
Paper grammage 45gsm-800gsm
Core diameter of raw paper roll  76mm
Finished paper size: Min. Width 30mm Max. Diameter of rewind paper roll: 1200mm
Speed 0-60m/min
Blades 20pairs
Power  8.1 KW/380V/50HZ
Weight ~2.5T
Dimension 2300mm X 2000mm X 1500mm
3500mm X 2000mm X 1500mm

1.Introduction:
This machine is used for punching on paper tube. It is easy operate and efficient.
This is the website about how it works:https://youtu.be/adTehQmLLuI
Main features
Model SANPTD-152
Tube diameter 50-200mm
Tube thickness 3-30mm

Brief introduction of JBZ-12H high speed paper cup machine
1. JBZ-H series high speed paper cup machine is advanced model, the most outstanding advantage is stable running and low fault rate. This machine adopts PLC control, very easy to operate.
2. All important parts are imported from Europe or Japan, these high standard spare parts guarantee the high quality of machine.
such as: the bearing, hot blowing equipment, servo-motor, PLC control system and other electric elements, etc.
3. It can produce both single side and double side PE coated paper cups.
High quality of cups made by this machine can satisfy the most selective customers.
It is the first choice for paper cup manufacturer when they want to renew their machine.
4. Cup size 6oz to 16 oz.
Technical specification
Model
JBZ-12H high speed paper cup machine
Product Speed
65-80pieces/min
Highest speed
85pieces/min
Total power
20KW,380V,50HZ
Main motor power
3KW
Heating power
13.2KW
Air supply:
1.8m3/min, 0.8Mpa
Cup size
6oz-16oz (cup mouth outer dimater: D50-D110mm, cup bottom diameter: 40-70mm, cup height: 50-138mm, bottom folding height: 5-10mm)
Paper type
single side PE coated paper and double side PE coated paper
Applicable paper
210-380gsm.
Dimension
2600 Ã?1530 Ã?1600mm
Weight
3000kg
IMPORTANT NOTICE
W.E.F. MAY 2012, A CERTIFICATE OF GENUINE WILL BE ISSUED FOR EACH MACHINE WE MANUFACTURE. THE CERTIFICATE, WHICH IS ENDORSED BY BOTH SAN MACHINERY & SINI MACHINERY, SHOWS AN IDENTIFY CODE FOR THE MACHINE. PLEASE CONTACT US BY SMS / CALL +8613608967385 OR EMAIL TO huntxue#SANMACHINERY.COM WITH THE IDENTIFY CODE, MACHINE'S EX-FACTORY DATE & SERIAL NUMBER FOR YOUR MACHINE'S GENUINE CONFIRMATION.

Ragger is mainly used for removing various kinds of twisting impurities in slurry like iron wire,string,plastic,cotton yarn,etc.Motor directly connect with reducer,adjustable rotation speed,stable operation,smooth running.Pinch roller of ragger is controlled by air cylinder,which can make sure the rope is pulled out with constant speed.

Paper Cup Making Machine

Productivity: 60 - 80 pcs/min.
Size of cups: from 6 to 34 oz / available: 6.5 and 7,5 oz for vending
New Ultrasonic system
New 2 airguns extra SWISS made
Power supply: 380 V/ 50 Hz
Power consumption: 16 kw
Dimension of the machine: 2,800 x 1,600 x 1,500 mm
In production: yes
Condition: excellent

Automatic Paper & Carton Cutting Machine
Format: 70/ 50 cm
Automatic loading
Automatic unloading
Power: 380 V/ 50 Hz
Power consumption: 5 kw
Dimension of the machine: 2,000 x 1,000 x 1,500 mm
In production: yes
Condition: very good

All information is given by the source, which deemed reliable.
Availability is subject to prior sales.

Product Introduction
This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc.
1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating.
2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency
3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products.

Technical Parameter Control System
Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs)
Inner Diameter 5-12mm Motion Controller Panel Master
Wall Thickness 0.3-1mm Operating Panel Panel Master
Stable Speed 1-40m/min. Language English
Winding Nose Two noses single belt Inverter 3.7kw Schneider
Machine & parts Painting Electric Components Schneider
Length fixing Encoder Pneumatic Components Jingwei
Speed Control By Inverter Servo Motor Schneider
Cutting System Multi-blades; 5 pcs online Servo Driver Schneider
Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin
Slider Shangyin
Paper straw collecting Manually Bearing Haerbin
Operator 1-2 person Configuration
Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers
Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers
Measurement & Weight Belt 5 Pieces
Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces
Working Space 7000*5000mm Extra blades 5 Pieces
Weight 1300kgs Useful Tool 1 Set


Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
 If parts (except wearing parts) are broken within guarantee time they will be changed for free.
 (it is not caused by human factor)
The client should pay for the cost following:
 
     1. Visa fee
     2. Air ticket
     3. Diet
     4. Accommodation
     5. Labor fee:50 USD/day (within guarantee time)
        100 USD/day (without guarantee time)

The xxzwn series disc thickener from dekelon, is used in the pulp and paper industry for dewatering and thickening low consistency paper pulp. Not only can this gravity thickener be used to thicken wood, cotton and straw pulp, it is also suitable for filtration and thickening applications in other industries.
When compared to other types of fiber suspension thickeners and other existing dewatering and thickening equipment, our disc thickeners feature a simple structure, easy installation and maintenance, a high production capacity, wide pulp adaptability and more. They have become increasingly popular among the pulp and paper industry.
According to the specific location of the drive part, the thickening machine has two arrangement modes. If the user is facing the outlet and sees the drum, and the drive part is on the right, the machine is a right hand thickener, represented by "y." on the flip side, if the drive part is located at the left, it is called a left hand thickener, represented by "z."

Dekelon produces high speed facial tissue machines in various models. This paper machine is ideal for making different varieties of tissue papers in a nominal grammage of 13-30g/m² from wood pulp board, waste paper, timber, bamboo, rice straw, bagasse and other pulp. It can serve as both a facial tissue machine and napkin machine, can used to produce roll toilet paper, facial tissue, napkin, paper towels and more, at a maximum speed of 300m/minute, a breadth of 1575-3600mm, and a daily output of 5-20t.
The main equipment structure:
1. Back rolls: f380 × 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 ° ± 2 ° with bearings 312.
2. Cylinder section: f1250mm×1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, f380 × 2000 couch roll 2 sets, the rubber hardness is 38 ° ± 2 °, thickness is 25mm, with bearings 312.
3. Water squeezing section: smooth rollf270 × 2100 one set and bottom rubber rollerf270 × 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device.
4. Touch roll section: f450 × 2000 one touch roll, rubber hardness is 95 ° ± 2 °, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups off320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box.
5. Main press section: natural granite stone rollf500 × 2000mm one set, equipped with a scraper, and af450 × 2000 rubber roller, the rubber hardness is 90 ° ± 2 °, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, f250 two groups of cylinder pressure device, and one set of air control box.
6. Gloss section: f400 × 2000 a calendar rubber roller, rubber hardness is 95 ° ± 2 °, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.