This series of machine are suitable for wood chips preparation in the paper pulp, and wood-based panel industries, as well as the chip production bases, by which logs and small wood are cut into high quality chips with even length, smooth chip cut and uniform chip thickness. It is also possible for the chipping of branches and twigs, as well as planks, etc. The chipper consists of frame, knife disc, feed and discharge spout, hood and electrical control system, etc.
The knife-roll straw cutters of this series are applicable to the pulp making company; they are used to chip the rice straw, wheat straw, kenaf whole stalk and some other raw materials. The feed part can drive separately, and can positive rotation and reverse in order to avoid chocking. The knife roll adopts rolling bearing, so is convenient in operation and maintenance. And the cutters can be divided into right hand machines and left hand machines according to the client's demand.
The chippers are used for cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of flakeboard, fiberboard and paper pulp. Many models of this machine, and every one has the different size, weight and dimensions.
The main disposition of sqzk-920 program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device The belt refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system.
The main disposition sqsk-920 numerical control paper cutting machine main disposition The chrome-plating work table, brings the air cushion electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system
The main disposition of sqzk-920tm program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and Italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system The Japanese Mitsubishi exchanges the digit servo-control technology Demonstration (label, equal parts, trimming, calculator, machine establishment, preservation) function
This series of machine is used to cut the paper roll into paper sheets. It adopts advanced technology of British and it is driven by AC servo motors, the high cutting speed reaches 300 cuts /min. And it can cut 8 paper rolls at one time. It is also equipped with automatic deflection rectify and antistatic device. The paper feeding and delivering units are automatic with the hydraulic system. The human and machine interface system could make operation become much easy and more convenient. Model: CHM-1400/1700/1900 Main specifications: weight of paper: 60-550gsm Cutting accuracy: 0. 5mm tolerance allowed Max. Cutting speed: 300sheets/min, operation speed depends on cut length, paper quality, paper grade&grammage. Max. Cutting meter speed: 300m/min Cutting length range: 450-1450mm Max. Diameter of reel: 1800mm Sheet stack height: 1300mm Max. Width of cutting paper: 1400mm/1700mm/1900mm Main work sections: Cutting section: 1. Computer operation interface, easy to operate. 2. High precision special alloy steel knife 3. Cutting accuracy is 0. 5mm tolerance Paper feeding section: 1. Double limbs oil pressure shaftless paper rack 2. Auto tension control system 3. Auto paper edge guiding system Electric control section: 1. PLC control system 2. AC servo driving motor 3. High precision encoder&cutting 4. Long endurance Slitting knife: 1. Three sets of slitting knives 2. Used for trimming and middle slitting Paper conveyer system 1. The number of overlapping sheets can be adjusted by this section. 2. The single sheet outlet can be adjusted. CHM-1400:12000kg CHM-1700: 13000kg CHM-11900: 14000kg.
This series of machine is used to cut the paper roll into A4 size paper and wrapping it. Model: CHM-A4-4 Main specifications: Paper Width: Gross width 900mm, net width 840mm Cutting numbers: 4 cutting-A4 210mm (width) Diameter of: Paper roll: Max. 1200mm. Min. 600mm Diameter of: Paper core: 3 or 6 inches or depend on the demand of clients Paper weight: 60-100gsm Sheet length: 297mm Ream amount: 500 sheets. Height: Max.62mm Max. Speed of production: 120m/min(depend on different paper) Max. Numbers of cutting: 404cutting/min Output of the ream: 3.2 times/min Load of cutting: 400gsm Cutting accuracy: about 0. 2mm Cutting requirement: constant speed, no break in reel, cutting all paper one time , eligible paper. Drive: AC frequency conversion and step-less Main power supply: 3*380V AC, 50HZ Voltage: 220V AC/ 24V DC Power: 32KW Compressing air consumption: 300NL/min Air pressure: 6 bar Edge cutting: 2*10mm Optional parts: Auto wrapping system CHM-A4-4: 17000kg.
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance. The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly. The paper feeding accuracy of paper location can reach 0. 001mm around. Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation. The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring. The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient. Model: CHM-92CD/115CD/137CD Main specification: Cutting width: 92cm/115cm/137cm Paper feeding depth: 92cm/115cm/137cm Master power: 3kw/4kw/4. 5kw Min. Paper-weight pressure: 150dan Max. Paper-weight pressure: 4000dan/4500dan/5500dan Cutting accurancy: 0. 2mm tolerance. Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm Cutting speed: 45cuts/min Voltage: 360-400V. Packing dimension: 92CD: 225*140*191cm 115CD: 275*140*200cm 137CD: 295*140*200cm.
This production line is uesd to produce 3 ply, 5 ply, 7 ply corrugated cardboard. Its production speed can be chosen from the following:40m/min, 60m/min, 80m/min, 100m/min, 120m/min, max. Paper width:1600mm, 1800mm, 2000mm.
Single facer
The yp-30c book core flatters pattern code number is composed of product range (dominant mode number) and the specification code number (auxiliary code number) Yp is the pattern code number, y indicated that presses (strength), p expresses evenly (entire), 30 is the specification code number, expresses the rated pressure. Yp-30c expressed that this company produces the third kind of model (hydraulic pressure), and full title is yp-30c hydraulic pressure book core flattening mill. The main application and applicable scope of yp-30c book core flatter The yp-30c book core flatter mainly uses in the paper product í«s book core presses, fagoting, guaranting presses and so on ú¿such as books, magazine, books and periodicals, exercise book) And may also widely use in other being probable to carry on with the pressure guaranteed that presses the even product the suppressed work.Such as the pressure and the solidification after the guarantees of lumber, plywood, rubber products and so on. It can substitute the tremendous pressure similar import products. And it caní»t use in material quality suppressions like steel plate, copper stock and so on.
1.This a4 paper cutting machine adopts the servo motor (or stepless motor) to control the fixed-length cutting, feeding.It is equipped with the photoelectric, correction, tracing modifying system. It can do crosscutting and vertical cutting at the same time.And it can trace feeding institution with the products, blowing& absorbing transportation at same time, automatic collecting, robert automatic folding materials and cross transport to worktable. 2.Drive system use pneumatic system, photoelectric sensor to control, folding materials system use oil pressure to improve equipment..This machine integrates photo electric, liquid and gas as a whole, plc touching screen, and has the features of easy operationhigh-precision cuttingstate operation and low noise. 3.The machine has the feature of the motor frequency speed adjustment, automation counting, giving an alarm when stop and tension with digital indication. 4.All transitional rollers can be done in clients opinions to avoid surface injure. 5.This machine is very important to scratch of gloss photo paper. wooden case
JBZ-300 paper plate forming machine is developed and designed as the requirement of market. It is pneumatic type automatic paper dish forming machine with owned unique libellant property right, which has functions as automatic paper feeding, forming, dish ejecting, temperature constant controlling, automatic counting, fast working speed, safe operation and easy maintenance, etc. This machine have two working station, two molds installed in the machine, you can produce two sizes paper plates in the same time or let the two molds the same to get double speed. Package size 1580*1230*1900.
JDGT Cake tray forming machine use machine hand to clip paper, feeding paper, separate paper, punching, discharge etc. This model can make different size of cake tray through changing mould. Simple structure, inverter, auto temperature controller, easy to operate, high efficient, stable running. Technical specification:- Model: JDGT Paper size: ¼+55-¼+130mm Raw material: Oil-protect paper 30-40gsm Capacity: 15-20pcs/time 20-40times/min. Power source: 380V / 50HZ ( it can be changed if customer require) Total power: 2.5KW Air source: working pressure 0.6MPa air volume 0.3m3/min. Weight: 500kg Package Size: 1500f-1300f-1400mm.
JWZ-100 type paper bowl form machine is an idea equipment of producing soup bowl, bigger size paper bowl, such as soup bowl, fast noodle bowl, large food cone-shaping containers and other fields etc Working principle: In this type bowl machine, we add an ultrasonic system to sealing the paper bowl body, you can produce both single side PE coated paper bowls and double sides PE coated paper bowls. Automatic paper feeding, two step pre-heating, sealing, oil silicon lubrication, bottom Punching, two step bottom heating, knurling, curling and bowl discharge with photo-cell detection, failure alarm and counter. Overall size 2900*1500*1600mm
The DMSQ-I End surface knife grinder is the successful new product which develops by absorption the technology from domestic and foreign knife grinder by the senior engineer and the technical personnel of my factory. It has the advanced level of the 90s. The DMSQ-I End surface knife grinder is suitable in the end surface sharpens each kind of tilted finish or the straight shape bit. Its characteristic is short grinding time, small grinding quantity, high grinding precision, sharp cutting edge. It is the essential ideal equipment of the printing, the paper making, the paper box, the carpentry, the forestry, the plastic and so on.
Machine width min 1200 mm Cutting distance min 40 mm Machine speed 500 mt/mn Paper grammage between 50-400 gr
Paper cup forming machine jbz-s12 Model jbz-s12 ultrasonic two-side-pe-coated paper cup forming machine Products description : Model jbz-s12 ultrasonic two-pe paper cup forming machine is an automatic machine with multi-working station, which has the function of photocell detection, failure alarm, counter and the advantages of humanism design, safer operation and easier maintance. It produces both one-side and two-side pe-film-coated paper cups after running a whole procedure of automatic pre-printed-fan-shape-paper feeding, cup-side-body sealing(ultrasonic wave), silicone-oil lubricating(for top curling), bottom punching, bottom pre-heating and pre-folding, main heating, bottom knurling(cool device), top curling and cup discharging. It is an ideal equipment of making paper cups for all kinds of drinks(hot and cold), tea cup, coffee cup, cold-beverage cup, beer cup, ice-cream cup etc. Technical specification of jbz-s12 paper cup machine : Paper cup size : 2.5--12oz (mold exchangeable); Raw material : one-side or two-side pe(polyethylene) film coated/laminated paper; Suitable paper weight : 140gsm--420 gsm (recommend 190--320 gsm); Rated productivity : 40---50 pcs / minute; Total power : 7 kw; Power source : 220/380v 50hz or other required; Total weight : 1300 kg; Package size (l x w x h) : 2500 x 1200 x 1400 mm; Electric control box size : 730 x 600 x 1300 mm Operating video of jbz-s12 paper cup forming machine ......Watch the operation videojbz-s16 ultrasonic two-side-pe-coated paper cup forming machine : Model jbz-s16 ultrasonic paper cup machine is designed for making high cups, such as 16oz to 22oz cups, The cup height : 125mm ---170mm, Speed : 30--40 pcs per minute, Total power: 5 kw Jbz-s22 ultrasonic two-side-pe-coated paper cup forming machine : Model jbz-s22 ultrasonic paper cup machine is designed for making higher cups, such as 22oz to 32oz cups, The cup height : 150mm ---190mm, Speed : 28--35 pcs per minute, Total power: 5 kw Wooden case
Paper cup forming machine jbz-a12 Model jbz-a12 automatic paper cup forming machine Products description : Model jbz-a12 paper cup forming machine is an automatic machine with multi-working station, which has the function of photocell detection, failure alarm, counter and the advantages of humanism design, safer operation and easier maintance. It produces one-side-pe-film-coated paper cups after running a whole procedure of automatic pre-printed fan-shape-paper feeding, cup-side-body sealing(heater), silicone-oil lubricating(for top curling), bottom punching, bottom pre-heating and pre-folding, main heating, bottom knurling, top curling and cup discharging. It is an ideal equipment of making hot drinks (tea, coffee, milk) cups and ice-cream cups etc. Technical specification of jbz-a12 paper cup machine : Paper cup size : 2.5--12oz (mold exchangeable); Raw material : one-side pe(polyethylene) film coated/laminated paper; Suitable paper weight : 135gsm--320 gsm (recommend 170--280 gsm); Rated productivity : 40---50 pcs / minute; Total power : 5 kw; Power source : 220/380v 50hz or other required; Total weight : 1300 kg; Package size (l x w x h) : 2500 x 1200 x 1400 mm; Electric control box size : 730 x 600 x 1300 mm Operating video of jbz-a12 paper cup forming machine ......Watch the operation video Wooden case
