Semi-automatic double wire binding machine can be feed by spool or through forming machine. The machine counts, cuts and places the wire in position to be closed. The operator places the perforated book on the table where the machine takes the book and places it in the wire before closing the wire. The machine can produce between 600-900 books per hour, depending on operator. This machine is ideal for the production of notebook, calendars, agendas, albums, etc.
Technical data :
Binding wide : 80-520 mm
Binding speed: up to 1000 volume/hour (based on your proficiency level)
Wire diameter: 1/4 -3/4
Power: 1(ph)220v 50/60hz (other voltage on request)
Weight: 300kg
Machine dimensions: 780x730x1150mm
Package way: wood case package
The semi-automatic double wire inserting and closing machine. The machine takes the double wire from either a spool or the forming machine and counts it. Once the appropriate number of loops are counted it cuts the wire into a strip and transports it onto the book insertion section. The operator takes the pre-perforated sheets and places the sheets onto the wire. Because that the binding lays on a rail it is very easy for the operator to fix the pre-perforated sheets in the double wire. The sheets with the inserted double wire are then pushes onto a pushing device that transport the group into the closing section. The finished product is delivered onto a delivery conveyor.
Technical Data :
Binding wide : 80-360 mm
Binding Speed: Up to 1000 volume/hour (based on your proficiency level)
Wire diameter: 1/4 -1 1/4
Power: 1(PH)220V 50/60Hz (other voltage on request)
Weight: 300KG
Machine Dimensions: 2020x950x1250mm
Package:wood case package
The machine is suitable for punching holes in all kinds of books, calendars paper, tutorial paper, pp in batch. This machine with functions of automatic separating, punching and receiving paper together. It provides your a high cost performance by concise and rational design.
1. Simple and convenient to adjust the size and moudle .
2. Flexible seperating paper mechanism and no need to turn over the papers to guarantee high compatibility and low failure rate.
3. Easy operation system to be controlled without professional experience.
4. High quality for punching without deckle edge and accurate punching position.
5. Optional punching moulds.
Max. Sheet:320320mm
Min. Sheet:13095mm
Punching speed:4200-5400 times/hour
Power:1ph 220v 50/60hz(other voltage is available)
Size: 18009001300mm
Weight: n.W.:635 kg g.W.:750kg
Package: wood case package
For the mass production of double loop wire that can be used for binding notebooks, calendars, agendas, albums, etc. The machine converts straight spooled wire, either nylon coated, tinned or galvanized to formed double loop wire that can be then spooled, cut and placed in boxes or attached directly to the binding machine. Can produce between 400-600 loops per minute.
Technical data:
Speed: 350-500 loops/min
Power: forming machine: 0.75kw
Coiling machine: 0.37kw
Paper cutting machine: 0.25kw
Power: 3ph 380v 50hz(other voltage on request)
Forming machine: 2400x650x1700mm
Coiling machine: 1300x1000x1200mm
Paper cutting machine: 600x500x1400mm
2626 Paper Machinery Suppliers
Short on time? Let Paper Machinery sellers contact you.
Applicable technical parameters
Tube inner diameter: 50 ¨c200mm
Tube thickness: 2-15mm
Paper plies: 25plies ( can be adjusted, depends on paper material and tube thickness.
Paper gramme: 150-600gsm
Machinery speed: 0-15m/min (depends on paper material , making tube¡¯s size and operator skill
In-line cutting unit:single circular knife
In-line cutting length:1000-4000mm
Machinery consists detailed description:
1. Adopt hang-type operation panel, more convenient for operation
2. Adopt infrared ray set cut length, convenient and accurately
3. Mechanical loading paper reels, reduce labor force
4. Paper ply tension control system, cylinder press paper ply firmly, can adjust tension freely
5. Supply gluing pots and pressure tension control system adopt single or double side gluing depends on tube required strength
6. Flanged shaft with flexile design, suit with tapered mandrel, can do fine-turning to tube inside diameter.
7. Machine frame is with the anti-deformation treatment, ensures machinery running stability and working precision.
Note: above are just parts standard technical parameters of ljt-4dnc paper tube machine for reference for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
6. Adopt human-machine interface specialized operation system, more convenient operation;
7. Digital control tension control system, do not need manual adjusting tension, ensure good slitting rewind effect.
Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
Mb-c paper core end grinding machine: smooth tube ends.
1. Id: 76-152mm
2. Thickness: 5-8mm
3. Length: 57-160mm
Mb-c paper core end grinding machine:
Mb-c paper tube grinding machine, tube ends burnishing, trimming, polishing: for trimming paper tube ends to be smoothly, such as dty tubes, poy tubes.
Applicable technical parameters
Tube i.D.
76-152mm
Working air pressure
0.6mpa
Tube wall thickness
5-8mm
Motor
1.5kw
Tube length
57-160mm
Operator
1 person
Speed: 35-45pcs/ min (speed changed depends on tube size)
Machine functions:
1. Cylinder drive molds to trimming and chamfering tube two ends
2. The molds are with heat-processing;
3. Machine frame and door are made of cold galvanizing plate;
4. The whole machine frame with affine deformation processing;
5. The four holes for grinding heads with high concentricity and straightness processing;
Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
1600*1150*1150mm
500kg
By container according to the machinery size.
Used 2.5m (100”) wide 2.25m (88")trim paper machine by gorostidi and bruderhaus. Producing mg papers, completely overhauled in 2004. Producing 18 to 140 gsm basis weight grades at a maximum design spe
A very versatile Board Machine, operating width 4200 mm, maximum speed is 450 m/min, producing
fluting, liner, plasterboard liner, brown board and other grades. Grammage produced 110 to 600 gsm.
Commissioned in 1988, latest upgrades in 2000-s.
Installed production capacity is up to 450 t/day and the mill produced in excess of 110,000 t/year.
3 Stock Preparation Lines
Line 1 – bottom layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
stock chest, two more stock pumps with motors, three HD cleaners, secondary sorting pulper (200TPD),
stock chest, two pumps, twin pressure screen (holes diameter 4 mm), rejects to chest, rejects pump, two
vibrating screens (holes 6 mm), stock chest, stock pump, deflaker, twin disc refiner, stock chest with
agitator, machine stock chest. All Polish and Russian built.
Line 2 – middle layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
three HD cleaners, stock chest, two stock pumps, secondary sorting pulper (200TPD), stock chest, two
pumps, three twin pressure screens (holes diameter 2.6 mm), stock chest, stock pump, hot dispersion plant,
screw press, steam channel, disperger, thickener, stock chest, stock pump, 4 deflakers, 2 disc refiners, stock
chest with vertical agitator, stock pump, machine chest, two thickeners, disc filter. All Polish and Russian
built.
Line 3 – surface layer.
Horizontal pulper, 200 TPD, equipped with ragger, two stock pumps with motors, stock chest, 2 stock
pumps with motors, two HD cleaners, stock chest, two pumps, three disc refiners, stock pump, machine
chest.
All Polish and Russian built.
Pressure screens for formers
7 Tampella pressure screens complete with motors
Rejects screens 7 vibrating screens PS3100 (Finland)
Board machine
Seven Escher Wyss vacuum formers, stainless steel, 4-zones vacuum.
First press suction press with pneumatic loading.
Couch press.
Combi-press.
Second press.
Automatic felt feeding horizontal.
Automatic felt feeding vertical.
Tail feeding - air feed.
Rope feed system.
93 drying cylinders, 1500 mm diameter, face 4910 mm.
2 cooling cylinders, 1500 mm diameter, face 4910 mm.
Pocket ventilation system.
Size press: 1st roll diameter 800, face 4680 mm; 2nd roll diameter 800, face 4680 mm.
Reel-up.
NOTE: Some Drive Cabinets and Control Panels have been stripped of some components. Some power
supply components and cables are missing.
The mill stopped production in 2007.
Rewinder
Rewinder, 4500 mm, speed up to 1200 m/min.
*used voith paper machine. Manufactured 1965.
*hydraulic headbox type 2, installed in 1974 by voith. Slice: 3260mm. *wire width: 3450mm. Trim width: 3000mm.
*egoteur diameter: 400mm.
*dryness after couch roll approximately 28%.
*open draw to first press. First press: suction roll as under roll even blind drilled.
*dryness after first press approximately 40%.
*second press: solid reverse press. Dryness after second press approximately 46%.
*third press: solid press. Dryness approximately 50-52%.
*fourth press: offset press predryer ir on dryer 2 approximately 900 kw. Ahead of presnip is a steambox from vib.
*predryer section consists of (18) dryers. Diameter 1500mm x 3300mm. Pressure 3, 3 bar. Billblade coater with following air =-turn from spooner.
*coating quantity total up to 26g/m2.
*intermediate dryer section (7) dryers, diameter 155mm x 3300mm. *coating station for top and back built by kmw, rebuilt 1994 by btg to abc as run today with bentblade.
*included ir from solaronica/irt 450 and 500 kw.
*after dryers (17) pieces, the first (2) cylinders without steam with chromium-plated area, the rest diameter 1500mm x 3300mm. Pressure 2, 5 bar. Mat
*on line calender form kuster with (2) polymer covered rolls, (1) is an s-roll. Nip is soft-soft. The calender is from (70) ties. Automatic *tambour turning with pope from umv built 1996. Drive from stromberg. Each dryer has own ac motor. Design speed 500m/minute. Electrical, the machine can run faster, but depending on the open draw (no pick up) the speed is limited to 400m/minute. Grammage: double coated wood-free paper 100-300gsm.
Model no. S0510p
Cutting style strip cut
Sheet capacity 5 sheets
Cut size (mm) 6.8
Continous shredding ¡ý20 times
Throat width (mm) 4 x 220
Switch auto-start /off /reverse
Media capacity n/a
Speed (m/min) 3.8
Bin volume (l) 10l
Noise level (db) < 72db
Rated power /current 120w 10w/1.2a 0.1a
Frequency 50-60hz
Voltage 100-120v/220-240v
Net weight (kg) 1.6
Machine size (mm) (l x w x h): 300 x 162 x 280 head size (mm) (l x w x h): 300 x 120 x 75.
Model no. S0710da
Cutting style strip cut
Sheet capacity 7 sheets
Cut size (mm) 6
Throat width (mm) 4 x 220
Media capacity cc(1) / cd(1)
Speed (m/min) < 72db
Bin volume (l) 10
Noise level (db) < 70db
Net weight 2.6
Unit size (mm) (l x w x h): 300 x 162 x 289
model No. C0714C
Cutting Style cross cut
Sheet Capacity 7 sheets
Cut Size (mm) 4 X 39
Throat Width (mm) 4 X 220
Media Capacity CC
Speed (m/min) 3.2
Bin Volume (L) 14
Noise Level (dB) < 72dB
Net Weight 3
Machine Size (mm) (L x W x H): 308 x 180 x 360
Cutting Head Size (mm) (L x W x H): 308 x 165 x 98
Fmcg paper cover machin can make paper covers from 38gsm to 70gsm.The machine is used for converting paper rolls to paper covers of various sizes.Butter paper ,and oneside pe coated paper can also be used in the same machine.
8ft length, 4ft width, 5 ft height.
Both single and 3 phase are available.
The weight of the machine is 800kgs.
