Material Structure :Â
PET/AL/PE
PET/AL/PA/PE
PE/AL/PA/PE
PE/AL/PET/PE or as customers' requirements.
Thickness:� 60---180microns
Size: It can be made in any sizes according to customer's requirements.
Function: Moisture barrier, oxygen barrier and UV protection.
Specification:Â Composite Strength: >30 Newton/15mm
Sealing Side Tensile Strength: >60 Newton/15mm
Application:
FIBC Liners for Big Bags usually used together with bulk bags or big bags. This is one of the most stable FIBC liners, and they are also known to improve filling, discharging and safe handling of goods.
It offers superior moisture, odor and oxygen protection for general use, as well as excellent UV protection for light sensitive products. Compatible with a variety of container types, foil liners are available in standard or custom sizes to fit most size packages.
EVT 1 gang weatherproof box is used with receptacles, switches and GFCIâ??s in branch circuit wiring. This 1 gang outlet box can be also used as a weatherproof junction box. The outlet box is supplied with 2 closure plugs, 1 green grounding screw, 2 mounting lugs and 2 self-tapping screws.
Weatherproof box one gang has UL approval with certificate number E483162. One gang weatherproof box is fabricated according to UL 514A and CSA C22.2 NO.18.1-13, Standard for Safety for Metallic Outlet Boxes.
Weatherproof box 1 gang is in rugged aluminum alloy construction. The weatherproof box can be used in both wet and dry locations, due to its excellent powder coating.
Single gang weatherproof box will be in grey, unless any other color is specified. This single gang weatherproof box is in 2 inch deep with 18.3 cubic inch capacity.
Aluminum Composite Panel (ACP Sheet) leading manufacturer in India. Envitect is one of the best Alco Panel Supplier across India. We have wide range of ACP sheets.
Control Panel Board is used for electrical Power Distribution. In this ACB, MCCB, SDF, MCB etc. are the main equipments. â?¢ Contro lPanel Board offers Isolation and Short Circuit as basic protections. â?¢ Other Protections like over current, Earth Fault, etc. are offered on case to case basis. Designing needs cable entry, access, site conditions, place of placement etc. information. Types â?¢ Compartmentalized design for ACB, MCCB and SDF feeders â?¢ Non-Compartmentalized design for MCCB, MCB feeders â?¢ Single front with rear access â?¢ Single front without rear access â?¢ Double front with both access
As per customer requirement we design panel or as per customer drawings we manufacture panel.The switch gear used in this panel as per customize or standard.
Aluminum composite panel
Panel Width: 1220 1250 1500 2030
Panel Length: up to 6000mm
Standard Size: 1220Ã?2440mm,Customized Accepted
Panel Thickness: 3mm,4mm,5mm,6mm,8mm 12mm
Aluminum Thickness: 0.06mm to 0.70mm
PE Core, Recycle PE Core,Fireproof PE Core
Color: Customization
Delivery Time: Within 14 days after receiving deposite
MOQ: 800 SQM
Payment Terms: T/T,L/C
Aluminum composite panel
Panel Width: 1220 1250 1500 2030
Panel Length: up to 6000mm
Standard Size: 1220Ã?2440mm,Customized Accepted
Panel Thickness: 3mm,4mm,5mm,6mm,8mm 12mm
Aluminum Thickness: 0.06mm to 0.70mm
PE Core, Recycle PE Core,Fireproof PE Core
Color: Customization
Delivery Time: Within 14 days after receiving deposite
MOQ: 800 SQM
Payment Terms: T/T,L/C
A3003 aluminum honeycomb core
Cell thickness available: 0.038-0.076mm
Side length: 3,4,5,6,7.5,8,10,12,15mm
Expansion size: as per customized
Supply form: slices, block
Linyi Golden Promise Decoration Materials Co., Ltd. has been devoted to the production and supply of aluminum honeycomb core and aluminum honeycomb panels for years.
Please feel free to contact Ivy for more details.
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance.
Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials.
1. THERMAL INSULATION â?¢ When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel
provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun
itions. crease in nc d insulation
ise when applied to walls. s crucial like hospitals,
hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTIONâ?¢ This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space.
THICKHNES: 1 mm
WIDTH: 4 mm
We can be produced in any length up to 6 meters
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance.
Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials.
1. THERMAL INSULATION When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel
provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun
itions. crease in nc d insulation
ise when applied to walls. s crucial like hospitals,
hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTION This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space.
SIZES:
THICKNESS : 3 mm
WIDTH : 40 mm
We can be produced in any length up to 6 meters
Specifications:
1) standard size:
Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm
Width (w) : 1220 mm£¬1250mm
Length (l) : no limitation
2) aluminum thickness: 0.3/0.4/0.5mm
3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm
4) max width: 1, 600mm
6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available.
7) core: fire-resistant polyethylene or normal polyethylene(pe)
8) standard specifications can be altered to meet customer¡¯s specific requirements
Please contact me if you are interested in our products, please contact me
Specifications:
1) standard size: 1220*2440
2) aluminum thickness: 0.026----0.5mm
3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm
4) max width: 1, 600mm
5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available.
6) core: fire-resistant polyethylene or normal polyethylene(pe)
7) standard specifications can be altered to meet customers specific requirements
We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.
