Engaging in tower manufacturing for more than a decade, our company has longtime experience in the design, manufacture and installment of steel tower mast structure. Main products include all kinds of iron towers and similar steel structures widely used in the fields like power transmission, substations, telecommunication, microwave-communication, radio/tv broadcasting, mapping, watchtower etc.
With over 30M height; mobile signal could have better propagation and away residential area. It's good idea to provide you better coverage for mobile signal. Monopole also could combine wireless and traffic control system in platform. Mobile phone operators share the monopole also good idea in cost saving.
1.For telecommunication transmitter station
2.All made by precision cnc milling
3.Very strict dimension requirements
4.Very small surface roughness and flatness
5.More than 100 screw holes
6.Silver plating or not requested by costumers
Strong and stable welded frame with prepared mounting holes.
All-round polyurethane gasket between door and frame with good sealing performance
Earthing kit mounted on the body, door and the mounting panel
Adjustable mounting panelcold-rolled steel
Door can be open to 130 degrees, open left or right freely.
St330 xdsl tester telecommunication
Functions & specifications
1.Xdsl test, lan test, dmm test
2.Modem & pc emulation
4.Log on ftp (file transfer protocol)
3.Test records can be printed by pc.
5.Test trace route
6.Ip route display
7.The module platform design, easily to modify tester with a new plug-in module.
8.Network layer test and web page browsing function achieves pc performance.
9.Modem mode supports pppoe, pppoa and ipoa protocols.
10.Memory key, mouse and keyboard which can be linked to usb interface
11.The 25k true color touch screen and touching pen simplify and accelerate operation.
12.Led indicates test states.
13.Test software can be upgraded.
Parameters
Chip set: Globespanvirata
Relevant standards:
Ansi t1.413
Itu-t g.992.1 (g.Dmt)
Itu-t g.992.2 (g.Lite)
Itu-t g.992.3 (adsl2)
Itu-t g.992.5 (adsl2+)
Up channel speed (mbps): 0f+24
Down channel speed (mbps): 0f+1.2
Adsl physical analysis
Noise margin (db): 0f+32
Attenuation (db): 0f+63.5
Output power test
Network layer test
Single, multiple ping test network performance
Dmm test
Ac & dc voltage (v): 0f+400
Loop resistance(¬+): 0f+20000
Capacitance (nf): 0f+1000
Insulation resistance (m¬+): 0f+50
Other parameters
The max test distance: 6.5 km
Memory capacity: 20 m
Display:
240x320 lcd, touch screen,
Windows interface
Power supply
External: from adapter, 9.6v dc
Internal: rechargeable 2100mah li-ion battery
Battery duration: 8hs (except modem status)
Our shelters have following configurations
Standard/customized
Lift able/flat pack shelters
Design available for wind speed of 280km/hr
Panel reinforcements of plywood and mild steel
Skin thickness of PPGI, SS and aluminum.
Each shelter has a AV WT of 800-900 kgs
3 to 5 shelters can be accommodated in a 20'
With our kind of standard packing.
Fiber OpticTermination Box indoor SC 1 fiber (TP-3323-1 FTB) provides a transition point between incoming cable and building access points for residential or business fiber installations.
The termination box is designed to house up to one SC type adapters and is compatible with SC field assembly connectors. Alternatively, an integrated splice holder houses up to two splices for pigtail termination.
The termination box is compatible with round and bow-type indoor drop cables with bending radius greater than 40mm
Main Features
Compact size
Slack storage area
Easy installation
Tindy wiring
Snap on cover
Bending radius greater than 40mm
Multi-location cable entry
Low insertion loss
High return loss
Good durability
Order Data
Item No: TP-3323-1
Descriptions: Fiber termination box (FTB), indoor, SC, 1 fiber, plastic housing, 115x86x22mm, without adapters, pigtails
1 pair dropwire subscriber terminal block (STB) module without protection, gel filled, is a device used in telecommunications to facilitate the connection between external dropwire and internal wiring at a subscriber's premises. Hereâ??s a detailed look at its components and features:
1 Pair: Designed to handle a single pair of wires, typically used for connecting a telephone line or a data circuit.
Dropwire: Refers to the cable that runs from the distribution point or telephone pole to the subscriber's premises.
Subscriber Terminal Block (STB) Module: A type of terminal block used to terminate the dropwire and provide a connection point to the internal wiring.
Without Protection: Indicates that the module does not include built-in surge or overvoltage protection.
Gel Filled: The module contains a gel that provides environmental sealing to protect the connections from moisture and contaminants.
It� is a practical and efficient solution for terminating and connecting single pair telecommunications lines.
Main FeaturesÃ? Ã? Ã?Â
Environmental Protection:
The gel filling protects the internal connections from moisture, dust, and other environmental contaminants, ensuring the reliability of the connection.
Compact and Robust Design:
The module is designed to be compact, making it suitable for installation in confined spaces. It is also built to withstand harsh environmental conditions, such as temperature variations and exposure to sunlight.
Ease of Installation:
Typically uses IDC (Insulation Displacement Connection) technology, which allows for quick and secure connections without the need to strip the insulation from the wires. This makes the installation process faster and more efficient.
Durability:
Constructed from durable materials that provide mechanical stability and long-term performance, even in outdoor or exposed locations.
Reliable Connectivity:
Ensures a stable and reliable connection for the transmission of telephone or data signals, minimizing the risk of connection failures.
Cost-Effective:
By omitting built-in protection features, these modules can be more cost-effective, making them suitable for use in environments where additional protection is not critical or where external protection devices are used.
Its main features include environmental protection through gel filling, ease of installation with IDC technology, and robust construction for reliable performance in various settings. While it does not include built-in surge protection, it offers cost-effective and reliable connectivity for residential and commercial applications.
Order Data
Item NO: TP_1301-1
Descriptions: 1 pair dropwire STB module without protection, gel filled
TAEPO -Your Professional Back Mount Frame Manufacturer
Series of Back Mount Frame, Get the Competitive Price from TAEPO Now!
DescriptionsÃ? Ã?Â
TAEPO has series of� Krone back mount frame. Different styles are suitable for different krone Modules to help your communication construction. If you can not find the eaxatly same back mount frame from us, please freely to send us your inquiry, we can customize for you.� � There are 1way, 2 way, 3way, 5 way, 6 way,10 way, 11 way, 20 way back mount frame.
10 pairs back mount frame 10 ways (TP-1212-10-10) is used to install the LSA modules ( You can visit details� here ), with the function of wiring.
It is usually mounted into Distribution Point Boxes (DP Box, you can visit details here ).
It belongs to the accessories for the copper connectivity. Jumber wires can be fed in from both sides of the module through the black rubber ring, which is used for protection against scratch for cables inserting for wiring.
Ã?Â
It is an element within modern telecommunications infrastructure, designed to optimize the organization and distribution of copper wire connections. This sturdy and efficient frame provides a reliable foundation for LSA modules, facilitating secure terminations and streamlined connections for voice and data communication.
Main Features Ã? Ã?Â
Snap-on Design: Module snap onto the frame and can take the module off with the assistance of the insertion tool
Efficient Setup: The back mount frame streamlines the installation and arrangement of LSA modules, contributing to quicker network deployment.
Organized Management: With designated labeling areas and modular capabilities, the frame ensures well-organized wire connections and simplified maintenance.
Space Optimization: Its design maximizes the use of rack space, making the most of available infrastructure while promoting accessibility.
Modular Flexibility: The frame's modular configuration allows for flexibility in adapting and expanding the network setup as connectivity needs evolve over time.
Labeling Space: Dedicated areas for labeling or marking are often included in the frame's design. This aids in identifying and organizing LSA modules and their associated wire connections.
Cable Protection: Its cable rings shield LSA modules and wire connections from physical damage, ensuring the longevity and reliability of the network infrastructure.
Order Data
Item No: TP-1212-10-10
Descriptions: 10 pairs LSA back mount frame, 10 ways
Descriptions
Disconnection module is a component used in telecommunications and networking infrastructure.
The term "LSA" stands for "L�¶tungs-Stanz-Abfrage" in German, which translates to "Solder-Punch-Test" in English. However, in the context of telecommunications, it generally refers to the "LSA+" termination system developed by Krone, a company known for its connectivity solutions.
In this module, "10 pair" indicates that it accommodates 10 pairs of wires, typically used for terminating and connecting telephone or data lines. The "disconnection module" aspect refers to its ability to easily disconnect or reconfigure these connections without having to remove or rewire the entire setup.
Overall, the 10 pair Krone LSA plus disconnection module is a convenient and efficient tool for managing telecommunications connections in various applications, offering reliability and flexibility in network setups.
Main FeaturesÃ? Ã? Ã?Â
The 10 pair Krone LSA Plus disconnection module has several key features that make it a valuable component in telecommunications and networking:
High-Density Termination
Reliable Connection:
Disconnection Capability
Durable Construction
Easy Installation:
Compatibility:
Testing Access
Cross-Connect Functionality
Protection Options:
Standards Compliance:
These features make the Krone LSA Plus disconnection module an essential component for efficient and reliable telecommunications and data network management.
Order Data
Item No: TP-1201-10
Descriptions: 10 pairs LSA disconnection module
XN 14M 46 feet carbon fiber telescoping pole extendable tube
The XN 14 meter/46 feet carbon fiber telescoping pole are made by 100% carbon fiber, There are some a nylon clamp/locks to make the carbon telescoping pole can extend and retract quickly , Sections: 10, Retract length only 1.72 meter/5.6feet. Net weight for the 14M carbon fiber telescoping pole only 3.5Kg, Easy to carry to everywhere.
The nylon clamp are corrosion resitant,So have long service time. Then different length/size carbon fiber telescopic pole can be designed. Whatever you use it for swimming pole,camera mast pole,rescue pole,net pole,fishing rod etc. It can suit your request well.
XN can custom carbon fiber telescoping pole with a extend length 2M/6.5ft to 21M/69ft.
Super light &strong 10 feet Twist clamp/lock carbon fiber telescopic pole tube for sale
The twist clamp carbon fiber telescopic pole are conntroled by a anodized aluminum twist clamp/lock, The pole can extend and retract quickly ,When you operate the twist clamp, It is same operate way with the mop rod in your home.
Because the twist clamp/lock material is anodized aluminum. Aluminum have advtange light weight, after anodized , The twist clamp are more corrosion resitant,So have long service time. The twist clamp is processed by CNC machine, It size can be customzied so that suit different size of carbon fiber tubes.Then different length/size carbon fiber telescopic pole can be designed. Whatever you use it for swimming pole,camera pole,rescue pole,net pole,fishing rod etc. It can suit your request well.
FAQ
Q: Are you trading company or manufacturer
A: We are Trading branch of our factory, We major accept order from Clients, Our factory/workroom major producing. We trading branch and our factory are one team.
Q: What size can you make
A: For unit tube,We can make tubes diameter from 5 mm to 550 mm, Unit length can up to 8 m, And we accept OEM.
B: From carbon fiber telescopic pole,We can supply the extend length from 2.4 m to 18 m;
Q: Does client need buy mold
A: We supply molds 300 tons, If we have suitable mold, clients no need to buy,If we dont have suitable mold, Clients need to buy at first time, When clients quantity up to a certain amount, The mold cost will return back to clients.
Q: What is the mode of transportation.
A: If small quantity, The first choice is by courier, Like DHL,Fedex,TNT,UPS etc.
If quantity is big, We can arrange transport by sea or by air,It can save many ship cost after all.
Q: If we receive your products, but find quality is not good, How will you do
A: Dont worry about it, Please contact with us at first time, If it is our problem, We will afford the responsibility and give you a satisfied answer.
Please feel free to contact us , You are always welcome here. :)
HDG tubular telecommunication tower is one of our main products, it has the following advantages:
1. ISO and CE Certificate
2. 20 years production experience
3. Material: Q235B, Q345B, Q420B
4. Hot Dip galvanization
5. OEM is welcome
6. High quality with reasonable price
7. Can produce various height and structural tower
8. Monthly production capacity can reach 5000 Metric tons
Performance Standard
Besides conforms to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standards) and customer's requirements.
Steel pipe/angle/hybrid tower welding requirements
1 )we used CO2 welding and submerged arc auto welding or other methods.
2 )Welded seam shall be full penetration and grinded.
3 )The welded product has no fissure, scar, overlap, layer or other defects.
Steel tower Galvanization/color painting
All steel items, bolts, nuts, washers & other components to be hot -dip galvanized with uniform. As per (ASTM-A-123). Paiting for corrosion proof.
Company Hardware Configuration
1. Our company has advanced digital physical and chemical laboratory.
HDG tubular telecommunication tower is one of our main products, it has the following advantages:
1. ISO and CE Certificate
2. 20 years production experience
3. Material: Q235B, Q345B, Q420B
4. Hot Dip galvanization
5. OEM is welcome
6. High quality with reasonable price
7. Can produce various height and structural tower
8. Monthly production capacity can reach 5000 Metric tons
Performance Standard
Besides conforms to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standards) and customer's requirements.
Steel pipe/angle/hybrid tower welding requirements
1 )we used CO2 welding and submerged arc auto welding or other methods.
2 )Welded seam shall be full penetration and grinded.
3 )The welded product has no fissure, scar, overlap, layer or other defects.
Steel tower Galvanization/color painting
All steel items, bolts, nuts, washers & other components to be hot -dip galvanized with uniform. As per (ASTM-A-123). Paiting for corrosion proof.
SPECIFICATION:
Mobile Standard system: GSM/GRPS
Support Frequency: 900/1800MHz;850/1900MHz
Standby time:7*24 hours
Weight:69g
Size:73*53*19mm
Function:
Fall Detect and auto alarm
SOS button and 2-way call communication
GPS/LBS location
Unit status by SMS
Monitored Battery
Power-on Prompt by SMS
Remote Power-off
Global tech gt-pcm-c series pcm multiplexer chassis can take 64k bps timeslot as granularity, construct n* 64k bit nd approximate 50w maximum power consumption.
* varied service types and port quantities are configurable flexibly in chassis.
*
¡ö rx range: ¡ü 27db
¡ö transmission distance
Multi mode fiber: 5km
Single mode fiber: 20/60/120km
¡ö jitter feature: comply with g.742 and g.832
¡ñ ethernet interface
¡ö 10m/ 100m auto negotiation
¡ö full/ half auto negotiation
¡ö related standard: iee802.3, iee802.1q (vlan)
¡ö connector: rj45
¡ö mdi/ mdix auto negotiation
¡ö mac address table: up to 4096
¡ñ e1 interface
¡ö bit rate: 2.048m bps ¡à50ppm
¡ö coding: hdb3
¡ö timeslot control: pcm30£¬pcm31
¡ö impedance: 120¦¸ (balanced), 75¦¸(unbalance)
¡ö port feature: comply with g.703
¡ö connector: rj45 (120¦¸), bnc (75¦¸)
¡ö jitter feature: comply with g.745 and g.832
¡ñ fxo/s interface
¡ö sampling frequency: 8k hz ¡à50ppm
¡ö encoding law: a-law
¡ö impedance: 600¦¸
¡ö overload point: +3.14dbm
¡ö related standard: comply with itu-t g.712¡¢g.713
