Antiscalant & Antifoulant for Reverse Osmosis, Nanofiltration & EDR Membrane Systems Antiscalant and antifoulant for reverse osmosis, nanofiltration and EDR membranes Accepta 2651 is a high performance, multi-functional reverse osmosis antiscalant and antifoulant scientifically formulated for the treatment and protection of reverse osmosis (RO) membranes, nanofiltration (NF) and EDR membrane systems. Accepta 2651 can be used in the production of drinking water and in seawater desalination process applications and is highly effective in preventing the build-up of calcium carbonate scale on reverse osmosis, nanofiltration and EDR membrane surfaces. Besides its excellent calcium carbonate scale inhibition properties, Accepta 2651 is also effective at controlling calcium sulphate, calcium fluoride and metal oxides scale. Accepta 2651 can be used in the production of drinking water according to NSF standard 60. The maximum allowed dose rate is 10 mg/l. Product Benefits • High performance RO membrane antiscalant and antifoulant • Ideal for RO, NF and EDR membrane systems • Suitable for use in seawater desalination process applications • Ideal for drinking water applications according to NSF standard 60 • Highly effective calcium carbonate scale control • Additional control of calcium sulphate, calcium fluoride and metal oxides scale • Not affected by chlorine or other oxidizing biocides Product Properties Appearance: Liquid Colour: Clear, pale yellow Specific gravity: 1.2-1.3 @20 oC pH: 7.5-10.5 @25 oC Boiling point: > 100°C Flash point Non flammable aqueous solution Chemical reactivity Not affected by chlorine or other oxidising biocides *Full details of the product properties are available in the Safety Data Sheet. See below. Application & Dosage Information Accepta 2651 should be injected in membrane systems after chlorine and sodium metabisulphite treatment. Accepta 2651 can be used in the production of drinking water according to NSF standard 60 where the maximum allowed dosage rate is 10 mg/l. Accepta 2651 is not compatible with residual cationic polymers from the pre-treatment. The dosage level of Accepta 2651 is dependent on the quality of the feed water and the saturation indices of the various scales forming species present in the concentrated brine. Dosage levels of Accepta 2651 when used in seawater desalination applications should be calculated using Accepta's specialist software, for further support and information please contact Accepta. Recommended injection point is into the feed water, downstream of any filtration equipment and cartridge filters. For further technical assistance concerning Accepta 2651 please contact Accepta.
Accepta 0019 is a high performance all organic cooling water treatment formulated using advanced scale and corrosion inhibitors with additional dispersants for the treatment and protection of industrial re-circulating cooling water systems. Accepta 0019 is stable at elevated temperatures throughout a wide pH range (acid dosing is not required) and in the presence of oxidising disinfectants. This single treatment inhibits scale formation, corrosion and sedimentation fouling when the system is treated in accordance with our recommendations. Accepta 0019 is a very effective treatment for modern cooling water systems operating with high calcium and alkalinity levels and has been proved successful in a large number of differing cooling systems. Product Benefits High performance all organic scale and corrosion inhibitor with dispersants for industrial recirculating cooling water systems. Halogen resistant. High calcium tolerance. Effective at Langelier Saturation Index up to +3.3. Allows elevated system concentration reducing running costs. Excellent scale inhibitor in severe scaling conditions. Simple test method. Product Properties Form: Liquid Colour: Off white Odour: Barely perceptible pH: 1.5 â?? 2.5 Water solubility: Miscible Relative density: 1.04 â?? 1.06 *Full details of the product properties are available in the Safety Data Sheet. See below. Application & Dosage Information Accepta 0019 should be dosed proportional to the system make up to ensure a continuous reserve within the system water. The product can be dosed direct from the drum or pre-diluted in a dosing tank. It is always advisable to carry out a â??Control Of Substances Hazardous to Healthâ?? (COSHH) assessment before use. Control Dosage levels will be dependent upon water quality, system conditions and operational factors. The correct level for your system will be advised by your technical consultant. A simple test method is available for on-site analysis.
Accepta 0018 is a high performance cooling water treatment comprising an aqueous blend of corrosion and scale inhibitors scientifically formulated for the treatment and protection of open cooling water circuits operating under softened or low natural hardness water conditions. Accepta 0018 is specifically formulated for use in base exchange softened water or waters with low natural hardness. Accepta 0018â??s scale inhibitor properties enable this product to minimise the risk of scale formation due to softener slippage or low levels of natural hardness. Accepta 0018 also includes a specific non-ferrous metal corrosion inhibitor. Product Benefits High performance aqueous blend of corrosion and scale inhibitors designed for use in open cooling water circuits. Excellent softened water corrosion inhibition. Very low order of mammalian toxicity. Environmentally acceptable due to freedom from chromateâ??s and heavy metals. Additional scale inhibition properties. Compatible with all other chemicals commonly used in water treatment Halogen resistant. Can be dosed directly from the drum for ease of dosing and handling. Non-ferrous metal corrosion inhibitor. High calcium tolerance. Simple test method. Product Properties Form: Liquid Colour: Straw colour Odour: Barely perceptible pH: 13.0 -13.5 Water solubility: Miscible Relative density: 1.20 â?? 1.26 *Full details of the product properties are available in the Safety Data Sheet. See below. Application & Dosage Information Accepta 0018 should be proportional to the system make up to ensure a continuous reserve within the system water. The product can be dosed direct from the drum or pre-diluted in a dosing tank. It is always advisable to carry out a â??Control Of Substances Hazardous to Healthâ?? (COSHH) assessment before use. Control Dosage levels will be dependent upon water quality, system conditions and operational factors. The correct level for your system will be advised by our technical consultant. A simple test method is available for on-site analysis.
Mineral water.
Water.
Mineral Water.Distributor
Mineral water, filling plant.
Drinking water.
Rice, mineral water.Import eport from pakitan, international freight forarder
PET preform in 28mm/30mm neck size for mineral water and beverages.
Distribution & power transformers, MV switch gear, energy meter.
Water treatment chemicals.
Mineral Water.
Process chemicals for food industry, water treatment chemicals etc.
Water treatment chemicals.
Water treatment chemicals.
Syrup (jam e shirin) and springley mineral water..Manufacturer & Exporter, Import
Chlorine Dioxide Tablet, Chlorine tablets for disinfection .Trade
High quality water treatment chemicals and equipment, boiler water treatment chemicals, cooling water treatment chemicals, reverse osmosis chemicals, wastewater and effluent treatment, biocides and disinfectants, closed system chemicals, polymer treatment chemicals, industrial descaling and cleaning chemicals, odour control chemicals, antifoams and defoamers.Export
machinery pumps motors.
