solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate. RECOMMENDED USES As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties. ADVANTAGES One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
High quality decorative alkyd enamel for use as topcoat on alkyd primers or undercoat. PROPERTIES Colour : Aluminium Solids : 40% Theoretical Coverage 10 â??12 m2/lit @ 25u DFT DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.0 +/- 2% Flash point: 38�°C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
DECORTEX D�©cor tex is water borne acrylic texture based on modified styrene emulsion with aggregates, which provide special pattern on the wall, woods suited for all climatic condition PROPERTIES Colour : As per shade card Finish : Texture finish Consistency: Thixotropic Solids: 65 % �± 3 % Specific gravity: 1.70 �± 0.05 Theoretical Coverage 1 -2 m2/ltr DRYING TIME :â?? AT 25 �° T To handle: 4 hours To Recoat: overnight Number of coats: 1 Application by: Roller for heavy tex or Hooper spray
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
Multi-purpose bitumen coal tar emulsion. PROPERTIES Gloss level: matt (ISO 2813-78) Solids: 25% (+/- 2 %) Viscosity: 22000 cps @25 �°C Brookfield 4/4) Theoretical Coverage 1 â?? 1, 5 m2/lit (@ 40u) DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: 24 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Specific gravity: 1.03 (+/- 2%) Flash point: Inflammable liquid.
High quality alkyd enamel white for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics. PROPERTIES Colour : Milky white Solids : 55�±2 % Theoretical Coverage: 10 â??12 m2/Lit DRYING TIME : â?? AT 25�° To handle: 4 â??6 hours To Recoat: 8 - 12 hours Vehicle type: Modified alkyd Specific gravity: 1.10 �±0.02%(depends on color) Viscosity : 95�±15 second in Ford Cup No.4 Flash point: 37�°C
Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 8 m2/ lit Curing time: 15 - 20 hours at 25 C Full cure: 7 days Flash point 22C (ISO 367 - 83) Specific gravity: 1.35 when mixed A+B Pot life: 8 hours at 25�¯ Mixing ratio: 4 parts base A: 1 part hardner B Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
paints
Hiflex Silky Touch Bite Registration material is a vinyl polysiloxane based impression material for full arch and quadrant bite records in a very short time for greater patient comfort and reduced mandibular deviations.
Hiflex Silky Touch Light Body is a hydrophilic vinyl polysiloxane impression material for the production of extra ordinarily smooth and highly precision impressions for models, crowns, bridges and dentures.
Hiflex Silky Touch Putty is a poly vinyl siloxane impression material that features excellent wettability, tear strength and dimensional stability. It is suitable for use as the tray material in the putty/wash impression technique for reproduction of teeth prepared for crowns, fixed bridges as well as both partial and complete removable prosthodontics.
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
We manufacture all kind of Paints,surface coatings,Anti corrosive coatings,Heat resisting coatings. We also do export merchandising of Iron ores fines.
The waterbone road marking paint is made of water as the dispersion medium, emulsified polyacrylic resin as the binder, and processed with the corresponding pigments, fillers and additives. During the construction process, the VOC emission is very small. A green product that can achieve clean production.
Fluorescent road marking paint is a kind of coating that emits fluorescence. It is made up of acrylic resin and fluorescent materials and other additives. It can absorb light under the illumination of the light source and convert it into another light of its own color. Therefore, it looks very bright and bright, and it can be painted with various signs to play the role of nighttime indication.
Acrylic Paints Water Base Paints Wall Paints New Acrylic, Vynil, Waterbase paints, White and colors, Residential and contractors grade, Name of product V600 Interior Acrylic Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : GENERALAcrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended to be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Minimum Order Size : Full Container Loads DENSITY (g/ml) 1.31 +/- 0.035 a 25°C BRIGHTNESS 10 to 20 Glitter Units at 60 ° DRYING TIMETo the touch 30 minutes, at 25 ° C (77 ° F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate. Quality From ISO 9000 paint manufacturer
V300 Interior Acrylic Latex Waterbase paint White and light colors Product origin : North America Key Specifications/Special Features : General Acrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended To be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general. Solids BY Weight (%)41% +/- 5% Viscosity 95 a 105 KU @ 25C Density (g/ml) 1.31 +/- 0.035 a 25C Brightness 0 to 5 Glitter Units at 60 Drying Time To the touch 30 minutes, at 25 C (77 F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate
USA Latex Recycled paint USA Recycled paint exporters Recycled Latex Paints Interior / Exterior flat paint Product origin : North America Minimum Order Size : Full Container Loads
