Find Verified Paints Suppliers, Manufacturers and Wholesalers

CAS No: 1341-49-7 EINECS No: 215-676-4 Molecular formula: NH4HF2 Molecular weight: 38.0443 Industrial Ammonium Hydrogenfluoride [Molecular Formula] NH4HF2 [Molecular Weight] 57.04 [Properties] White needle-like crystal, easy deliquescence and agglomeration, soluble in water and slight soluble in alcohol; decompose to ammonia and ammonium bifluoride in heat water, decompose to ammonia and hydrogen fluoride when being heated, its aqueous solution is acidic and can corrode glass. [Uses] 1. Glass etchant, preservative, disinfectant, solvent for metal beryllium made of beryllium oxide, analytical reagent and surface treatment agent for silicon steel plate. 2. It is also used as an oxidant for the manufacture of ceramics and aluminum-magnesium alloys, as well as a cleaning agent for boiler feed water systems and steam generation systems. 3. Acidification treatment of oilfield sand. 4. Organic synthetic fluorinating agent. 5. Plating solution. 6. Reagents for extracting rare elements. 7. Paint industry

Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.

PTA is one of the important bulk organic raw materials, widely used in chemical fiber, light industry, electronics, construction and other aspects of the national economy. At the same time, the application of PTA is more concentrated. More than 90% of PTA in the world is used to produce polyethylene terephthalate (PET). It needs 0.85-0.86 tons of PTA and 0.33-0.34 tons of MEG to produce 1 ton of pet. Polyester includes fiber chip, polyester fiber, bottle chip and film chip. In the domestic market, 75% of PTA is used in the production of polyester fiber; 20% is used in the production of bottle grade polyester, mainly used in the packaging of various drinks, especially carbonated drinks; 5% is used in film grade polyester, mainly used in packaging materials, films and tapes. It can be seen that the downstream extension product of PTA is mainly polyester fiber. Application: PTA is mostly used in the production of polyethylene terephthalate (polyester). It is an important raw material for polyester fibers, films, plastic products, insulating paints and plasticizers. It is also used in dyes and other products' production.

Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.

Wholesale Supplier of Aluminum Wheels Scrap/ Aluminum Car Wheels Scrap for Recycling Wholesale Aluminum Wheel Scrap: Factory-Direct Prices for Bulk Buyers Aluminum Wheels Scrap/ Aluminum Car Wheels Scrap for Recycling Key Specifications/ Special Features: Model Number:Aluminium Alloy Wheels Scrap Type:Aluminum Wheel Weight:50KG Al Content (%):99.9%Min Supply Ability:20000 Tons per Month Aluminum Wheel Scrap Available : Aluminum content 75%, 95% 99.7% 99.9% Aluminum wire scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping Density: 2.702g/cm�³ Melting point: 660.37�ºC Boiling point: 2467.0�ºC Color: silver white Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum scrap UBC Aluminum Alloy Wheel Scrap Grade: Aluminium Application: Scrap Alloy or not: Alloy Features: Free from Nuts, Steel plate, paint Material : 14 inch/ 15inch / 17inch / 18inch / Appearance: Silvery White Al content: >98%

Titanium Dioxide is mainly used in Pigment applications such as paints plastics, varnishes, food coloring, printing inks, waste water, sterilization, fibers, rubber, cosmetic products. Titanium Dioxide Anatase WC Code: 20-019-01 Sales Specifications Titanium Dioxide Content by Wt.: 98.4% Volatile Component @ 105oC (by wt.): 0.2% Component Soluble in Water (by wt.): 0.5% Residue on Mesh (45m; by wt.): 0.02% Color (L*): 96.3% Light Scattering Power: 100% Volatile at 105oC after 24h Stay at (23�??�?�±2)oC/RH (50�??�?�±5): 0.4% pH of aqueous suspension: 7.6 Oil Absorption Value g/100g (by wt.): 26 Resistance of Aqueous Extraction liquid �??�?�©*m (by wt.): 28% L Value of Dry Powder Whiteness: 99.24 A Value of Dry Powder Whiteness: -0.15 B Value of Dry Powder Whiteness: 0.07 Wg Value of Dry Powder Whiteness: 98.22 Fe2O3g/g: 81 Color b*: 2.54 Color a*: -0.46 Average particle size (m): 0.34 Tinctorial Strength (compare with specimen): 105 Packing 25 KG Bag, 35 bags per pallet

Cardanol-based resins possess outstanding resistance to the softening action of mineral oil and high resistance to acids alkalies, antimicrobial properties termite and insect resistance, etc. Contributes to improved flexibility, good drying after banking, high electric insulation properties, and thermal stability. Amenability to chemical modification to effect desirable changes gets specific properties for making tailor-made polymers of high value, thus the structural changes could be effected at the hydroxyl group, on the aromatic ring, and on the side chain. These properties make Cardanol an effective substitute for petroleum-based phenol. Specifications: Density @ 300C : 0.9275 â?? 0.9350 Viscosity @ 250C (cps): 40 â?? 60 Iodine value: 210 -280 Ash content: Negotiable Volatiles losses: 0.5 â?? 2% Acid value: 2 â?? 5%. The products obtained from CARDANOL have many advantages over those manufactured from other substituted phenols. It is therefore widely used in the manufacture of Nevolac & Resol Resins, Oil Soluble Resins, Lamination, Surface coating & paints, Electrical Insulating, Varnishes, Brake lining, clutch facings, Lacquers, Pesticides, Rubber compounding, Adhesives, Wax substitutes, Mineral oil additives, Azo Dyes

PTA is one of the important bulk organic raw materials, widely used in chemical fiber, light industry, electronics, construction and other aspects of the national economy. At the same time, the application of PTA is more concentrated. More than 90% of PTA in the world is used to produce polyethylene terephthalate (PET). It needs 0.85-0.86 tons of PTA and 0.33-0.34 tons of MEG to produce 1 ton of pet. Polyester includes fiber chip, polyester fiber, bottle chip and film chip. In the domestic market, 75% of PTA is used in the production of polyester fiber; 20% is used in the production of bottle grade polyester, mainly used in the packaging of various drinks, especially carbonated drinks; 5% is used in film grade polyester, mainly used in packaging materials, films and tapes. It can be seen that the downstream extension product of PTA is mainly polyester fiber. Application: PTA is mostly used in the production of polyethylene terephthalate (polyester). It is an important raw material for polyester fibers, films, plastic products, insulating paints and plasticizers. It is also used in dyes and other products' production.

Leads Composition structure 1. There must be no molten slag, particulate oxygen, inclusions and external pollution on the surface of lead ingots. 2. Lead ingots must not have cold partitions, and must not have flash burrs larger than 10mm (repairing is allowed). Sign 1. Each lead ingot will be cast or printed with the trademark and batch number. 2. Use paint that is not easy to fall off to mark the brand mark on the lead ingot. The color and position of the mark should meet the requirements. 3. Each bundle of lead ingots should have a striking and difficult to fall off mark, indicating the manufacturer's name, product name, brand number, batch number and net weight. Single weight of small ingot 48kg�±3kg,42kg�±2kg,40kg�±2kg,24kg�±1kg; Single weight of large ingot 950 kg�±50kg,500 kg�±25kg Package The small ingots are bundled and packed with non-corrosive packaging tape. Large ingots are supplied as bare ingots

Product Name Diphenylacetonitrile / Benzene-acetonitrile, alpha-phenyl CAS NO. 86-29-3 Appearance Colorless Liquid Purity 99% Density 1.1061 Melting Point 71-73 �°C Boiling Point 181 �°C/12 mmHg Flash Point 120 �°C Refractive Index 1.5850 Vapor Pressure 21.3 hPa (190 �°C) Acidity Coefficient (pKa) 9.30�±0.10 Application Chemical raw materials;Amines Usage 1. It can be used as a herbicide, used for turf prevention and control of young grasses before germination, used for synthesizing isocyanates, and further prepared into UV coatings, PU paints, transparent elastomers and adhesives, etc. 2. Used in polyamide and epoxy resin industries Use as an intermediate in organic synthesis. 3. In medicine, it is used to produce gastric amine, phenethylpiperidine, and other drugs such as pain relief. Storage Keep in dark place,Inert atmosphere

Hot sale Toluene Dissocyanate/TDI Toluene diisocyanate (TDI) is an aromatic diisocyanate that is a clear, pale yellow liquid with a sharp, pungent odor, which is insoluble in water and miscible with most common organic solvents. TDI (CAS No. 26471-62-5) consists of two isomers: toluene-2,4-diisocyanate (2,4-TDI) (CAS No. 584- 84-9) and toluene-2,6-diisocyanate (2,6-TDI) (CAS No. 91- 08-7), which is commercially produced in different ratios. The most common ratio is 80% 2,4-TDI/20% 2,6 TDI. TDI is widely used and accounted for 34% of the global isocyanate market in 2000 Tdi 80/20 is used for Flexible Polyurethane Foam and other other polyurethane applications including elastomers,synthetic leather,coated fabrics,paints and adhesives. It is spray-applied,closed-cell polyurethane foam system with high fire resistance properties.it applies to all kinds of spray-applied thermal insulation engineering,such as building exterior cold rooms,large-scale pipeline,etc.

CAS No: 1341-49-7 EINECS No: 215-676-4 Molecular formula: NH4HF2 Molecular weight: 38.0443 Industrial Ammonium Hydrogenfluoride [Molecular Formula] NH4HF2 [Molecular Weight] 57.04 [Properties] White needle-like crystal, easy deliquescence and agglomeration, soluble in water and slight soluble in alcohol; decompose to ammonia and ammonium bifluoride in heat water, decompose to ammonia and hydrogen fluoride when being heated, its aqueous solution is acidic and can corrode glass. [Uses] 1. Glass etchant, preservative, disinfectant, solvent for metal beryllium made of beryllium oxide, analytical reagent and surface treatment agent for silicon steel plate. 2. It is also used as an oxidant for the manufacture of ceramics and aluminum-magnesium alloys, as well as a cleaning agent for boiler feed water systems and steam generation systems. 3. Acidification treatment of oilfield sand. 4. Organic synthetic fluorinating agent. 5. Plating solution. 6. Reagents for extracting rare elements. 7. Paint industry