Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion. PROPERTIES Colour : Full spectrum Solids: 50 +/- 2 % Theoretical Coverage 10 - 11 m2/lit DRYING TIME : AT 25 C To handle: 3 hours To Recoat: 5 hours Flash point: 27C Specific gravity: 1.10 �±0.05 Pot life: 6 hours Mixing ratio: 4 parts base "A" :1 part hardner "B" Solvent: Polyurethane thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system CHARACTERISTICS High build in single coat. Excellent resistance to fresh and salt water Abrasion resistance and flexible films. Excellent inter-coat adhesion. Resistant to solvents. Resistance to mild acids. USES Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
We have presses from 20 ton to 250 ton we are supplier for Yamaha Motors, Daimler Trucks,Philips, Royal Enfield Motors, fermetor Auto Door for Lift our customer List Exhaustive, we make tool and die and produce your component our Email id :hexagontechindia@gmail.com ; 20 ft container
we Can Supply epoxy Paint, Epoxy Polyester Paint and Pure Polyester Paint our emailid:hexagontechindia@gmail.com 20 ft container
epoxy paint Polyurethane Paint, Mio , glass flak epoxy paint, and all type protective coating for Industries Paint for UPVC coating, Paint For glass Coating ( Water Base Paints) Epoxy Floor Coating Paints our Email Id ; hexagontechindia@gmail.com 20 feet container
450ML 24PCS/CTN 363G GROSS WEIGHT OEM is welcome Near Qingdao port, rich experiences on exporting dangerous goods Shandong Saigao New Materials Co.,Ltd, located in Linyi city,Shandong province 5 production lines 90000 covering areas 100 workers 6 engineers
We can supply powder coating extrusion with customized color
Water-based hydroxyl acrylic dispersion for floor coatings Hydroxyl Acrylic copolymer emulsion Product Description Wl-156 is an anionic hydroxylated styrene acrylic copolymer emulsion. It is recommended to use with amino resins for baking coatings, which requires high gloss, good hardness and outstanding solvent resistance. Biocide: CMIT/MIT 3:1 49ppm, and MIT 240ppm. Properties 1. Excellent resistance to boiling water 2. High gloss, high hardness 3. Excellent solvent resistance 4. Excellent recoatabilit Note:Be sure to adjust the pH of WL-156 over 7 with the pH adjustment in use. Characteristic data* Property Value Unit Method Appearance Translucent to milky white Weight Solids 47�±1 % pH 3.5-5.5 GB 6920-1986 Viscosity 10-1000 mPs Brookfield,LV,62#,30rpm,25C MFFT 40-42 C GB/T 9267-2008 OH content 1.3 % Calculated on solid resin Density 1.04 g/cm3 GB/T 4472-2011
Water based Alkyd resins for industrial coatings Alkyd resins represent, both historically and commercially, the class of chemical compounds used in the field of paints and stains. Their chemical structure is a continuous and waterproof film which can protect surfaces from multiple strenuous agents conducting an anti-corrosive. The commercial paints based on these resins, the molecules of the structure, in particular, create strong structural interactions involving the formation of films able to cover any type of surface by protecting against aging, weather and wear. the paints made from alkyd resins have been among the first to be used in the construction industry, in particular in the production of exterior paints and enamels, and in the production of products for the treatment of surfaces exposed to particularly arduous conditions, for example various ferrous metal substrates such as structural steel, railings, equipment and machinery. We offers alkyd resins that have achieved high functionality through modification with other resins such as acrylics, urethanes, epoxies. Features: Good storage stability, no ease to hydrolyze; Environment friendly product, VOC of less than 7%; Fast dry, and excellent gloss; unnecessary to add drier during paint preparation; Excellent shear stability, and can directly use for pigment paste grinding; Excellent anti-corrosivity, and good initial water resistance; The finished product paint has good versatility and good in-can appearance, and can replace oil based alkyd anti-rust paint, alkyd ready mixed paint, alkydenamel, etc Waterborne Acryle Resin Product No. WL-310 Acryle modified akyd dispersion Solids content: 42±2 Viscosity(25,mPa·s): 2000 Air dry: Oxidation Cross-linking Property:Low VOC; High gloss; Excellent corrosion resistance. Application:Waterborne alkyd enamel ready mixed paint and anti-rust paint PS:(1) The Viscosity withï¼?is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether.
Hydroxyl Acrylic Resin SE6651 K SE 6651 K is an hydroxyl functional acrylic resin that, when combined with appropriate aliphatic polyisocyanates, provides excellent durability and outstanding gloss retention. It should be used in solid color paints and clearcoats for vehicle refinishing and in industrial topcoats. Se 6651K is used in combination with aliphatic isocyanates it exhibits good exterior durability, good build and gloss, high end hardness and good adhesion results on metallic base coats. 1. Features High gloss, good levelling property, high hardness, excellent chemical resistance and pigment dispersity 2. Applications PU top coat, automotive refinishing paint, colored paint 3. Properties Componen:Acrylic ester copolymer Appearance :Clear Fe-Co Color:ï¼?1 Viscosity Pa.s/25â??: 2-5 Non-volatile%:60�±2 Acid value mgKOH/g: 4-8 Solvent: XYL/S-100 Hydroxyl value:86 4. Compatibility and solubility XYL + BCS + TYL + CAC + BAC + CYC + Remark:+ show soluble in/compatible in 5. Reference formula Two component (brilliant black paint) Diluent (A component) SE6651K 70 XYL 40 BBG333 0.2 TOL 5 BBG306 0.3 BAC 25 BBG110 2.0 CAC 15 BAC 24.3 PMA 15 Carbon black 3.0 10% sn 0.2 (B component) Bayer N3390 A component: B component: diluent=100: 15: 80~100 6. Process conditions Baking condition: (1) 65 x 60min, place 24hours for test (2) Air drying Substrate: Sand plate tin 7. Test technical index Test Item Test Method Reference Standard Test Standard Test Result (reference value) Surface drying Blow cotton ball method ------ Not stick cotton ball 25min(2m) Hard drying Finger pressing method ------ No finger print 24h(25m) 8h hardness Pencil scratch GB/T6739-96 -----
Supplying business of construction chemicals like Anchor grout, Epoxy floor coating
Paints & coatings Acrylic copolymer newtonian tp resin Aluminum paste Acrylic latex emulsions (water base) Aromatic hydrocarbon resins, 105 & 114 sp Styrenated acrylic emulsions (water base) Fumed silica (treated) Trimellitate plasticizer Ground cellulose fiber (thickener) Epoxy powder coating resin ( for rebar) Fine tone t resin 100% polyester resin Acrylic resin in butyl acetate Coconut oil alkyd in butyl acetate High solids short oil alkyd Phenolic modified short oil alkyd Polyester powder Water reducible epoxy ester High solids chlorinated alkyd Vinyl acrylic latex
Flame retardants Saytex bt -93 Para-t-butyl phenol end capped with tetrabromo bpa Fyrol pcf Tbbpa (tetrabromobisphenol a)
Deyang Dongfang Yoyik is a trade production company with many international brands. Our source is authentic, product is quality guaranteed, price is reasonable, welcomed by our new and old customers. We also sell all kinds of processing parts, non-standard parts for power plant dedicated. insulating varnish H31-3 polyester varnished glass cloth tape 2440 0.15*25 insulating washer 4Q8524 Insulation Coating fiberglass Tape 0.1*25mm fiberglass tape 2440 RTV epoxy adhesive 793 slot wedge Corrugated strip 3Q7735 F-grade modified epoxy glass fiber FJ6189 button head nipple KH-32 insulating varnish H31-3 bolt anti-seize lubricant BOSTIK Sealant KE-45 rotor slot wedge 3Q6202 glass cloth tube Φ21/Φ25*34 glass cloth tube 3640 grease gun 05C2420 head slot wedge 4Q9188 F-class adhesive for stator core J0403 steam turbine generator Sealant WH53351JG Neoprene rubber sealing gasket aluminum power Heat-resisting varnish 193 insulating ring 4Q3536 cylinder sealing grease DFSS-1 grease gun KH35/3Q3358-9 generator end cap grease gun KH32 insulating cover 4Q6674 sealing grease T2575 sealant injector KH32 High resistance anti-corona varnish HEC56614 rotor slot wedge 3Q6195 generator end cap Sealant T2075 sealant SWG-1 insulating varnish H31-3 ã??2019-11-28-DFJerryã??
Antistatic coating Surface resistance:
Conductive graphene EMI shield coating Surface resistance:
The biggest difference between thermoplastic spraying road marking paint and common thermoplastic screeding coating material is that the viscosity and density of the coating and the construction process are different. During the construction, the molten paint is applied to the road surface by centrifugal force to form a road marking paint. The thermoplastic spraying road marking is thinner, the construction is fast and efficient, and the durability is close to the ordinary hot-melt coating line, which makes it economically more advantageous than the ordinary hot-melt type. Generally applicable to the old road over coating and road sections with very rough road structure.
EPOXY THINNER is a mixture of suitable solvents intended for thin epoxy products. It can be used for cleaning tools, dirty with epoxy products. Epoxy thinner is a balanced solvent blend designed to thin epoxy paints. It can be used to control film thickness per coat, reduce orange peel, improve wetting of topcoat to primer and reduce dry spray or dry spots in painted areas.
Our spray paints are acrylic base, all purpose, fast dry, rust resistant, bright finish and cfc free.
We are the first and only Company in Pakistan producing Aerosol (spray) Paint and Decorative wall paints. Contact me for competitive quotation.
