Automatic clamping paint shaker Kd-30c automatic clamping paint shaker Case size:1060(h)f-700(w)f-680(d)mm Packing size:1200(h)f-840(w)f-810(d)mm Case weight:210kg Gross weight:245kg Can size:360(h)f-360(w)f-350(d)mm Can compress-board readjust range:90-400mm Shaking time:60/120/240s Applicable range:1-35kg Pressure:3500n Power++750w Speed:1400r/min Shaking frequency:680-710t/min Power supply:220vf+10% 50hz 10a Features of kd-30c Small size, save space! Compose with main vibrator, container press cover and microcomputer controller and so on, is suitable to 0.5-20l all kinds of can/barrel.Max load weight is 35kg. With plc microcomputer control--can choose and readjust the shaking time freely, long use life span. Automatic clamp and bring different pressure to bear on the can according to the can size, will not squish or stave the can. Case size:1060(h)f-700(w)f-680(d)mm Packing size:1200(h)f-840(w)f-810(d)mm Case weight:210kg Gross weight:245kg
Kd-40a manual clamping paint shaker applicable range:0.5-20l(paint in drum) Applicable height of drum range:80-410mm Shaking frequency:710t/min Working power:220v 50hz Power supply:0.75kw Net weight:195kg Gross weight:240kg Case size:1070(h)f-820(w)f-750(d)mm Packing size:1200(h)f-900(w)f-810(d)mm Kd-40a manual clamping paint shaker High speed thorough action--mixes most paints in at most 30 seconds. Will accept 0.5-20l cans. Fully enclosed for silent operation and added safety. Large door with front roller for easy can load in. Safety interlock--prevnts the cabinet door from being opened while the machine is running. Accommodates all can shapes and sizes from 0.5-20l. Time set:0-15min Net weight:195kg Gross weight:240kg Case size:1070(h)f-820(w)f-750(d)mm Packing size:1200(h)f-900(w)f-810(d)mm
Pmlc - 45 Alumina = 45% Setting time = 4 hours Standard 50 kgs hdpe bags with liners
Pvcsleeve cover cap coating 1 pvc insulation sleeve: hht-5 group; hhr-5 group; hhf-110 group; hhf-187 group; hhf-205 group; hhf-250 group; hhll-187, 250 group; hhl-187, 250 group; hhl-250 group;hhff-187-1, hhff-250-1 group; 2 pvc insulation cap: terminal cap; end cap; short caps; long caps; 3 pvc insulation cover: coupler cover; clip cover; switch cover; housing cover; fuse cover; 4 pvc insulation coating; boots cover Formal standard packing
Pro-Eco Cleaner effectively cleans a wide range of industrial floor types ranging from epoxy, methylmethacrylate, polyurethane, concrete and ceramic tiles leaving floors sparkling, clean and safe.
Special Features : Provides basic protection to ferrous metal.For spraying and brushing Uses : For metal items and light constructions, in an urban, moderately corrosive environment, such as bars, sheds, etc Painted object : Iron Parts and Light Construction Burglar Bars Barns Applied Surface : Ferrous metals Paint Type : Primer Properties : For brush and spray application One Component
Environment friendly, tbt free anti fouling paint. Reduces surface resistance by patented catalic conversion technology. Improves speed and fuel consumption up to 20%. 2.5 kg pails and 20kg pails
Special Features : Water based paint, excellent workability. User and environment friendly. Displays the Green Badge of the Israeli Standards Institute. Uses : SUEDE is used to create a suede-like effect on walls. One of the 'Effects in Color', water based paints series. Easy application. Suitable for interior walls. Available in five fashionable shades, suited to the unique texture of this effect. Painted object : Walls Paint Type : Topcoat Package Size : 5 lit Gloss : Matt Calculated spreading rate [min] : 2.0 m2 Calculated spreading rate [max] : 3.0 m2 Touch Dry [max] : 30.00 h Waiting Between Coats - Hours : 1.0 Finnal Drying : 24 Thinner : Water Cleaning Thinner : Soap and Water Shelf life (months) : 24 * Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor. ** Drying time at 25 deg. C and 65% relative humidity
Special Features : Intumescent paint manufactured under a license from COPON Ltd., England. Conforms to standard B.S. 476, Part 7, Class 1 Fire Rating, approved by the Standards Institute as Class IV paint against spreading fires (IS 755). Uses : Protection of wood, metal, plastered or concrete walls against fire. Suitable for interior use only. The product's properties are lost upon contact with water. Applied Surface : Metal Wood Plaster or cement walls Paint Type : Topcoat Colour : White
Dyo epoxy enamel Excellent adhesion and abrasion resistance. High resistance against chemicals, sea-water, mineral oils. Its high thixotropic nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Packaged in 22 kg can
Dyo pu topcoat fd 2k polyurethane fast drying(fd) alkyd based car repair and vehicle paint. Has gloss, semi gloss, gloss retention, high mechanical and chemical resistance and high flexibility. Has resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Packaged in 18 kg can
Waiting Between Coats - Hours : 1.0 Hard Dry- Hours : 1 Shelf life (months) : 18 * Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor. ** Drying time at 25 deg. C and 65% relative humidity.
Package Size : 25 kg Gloss : Matt Touch Dry [min] : 3.00 h Touch Dry [max] : 4.00 h Hard Dry- Hours : 4 Shelf life (months) : 12 * Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor. ** Drying time at 25 deg. C and 65% relative humidity.
Dyo hb epoxy primer Excellent adhesion over galvanized surfaces. High resistance against corrosion, hummidity and chemicals. Its high thixotropric nature provides it to be applied as thick layer. It resists temperature up to 150 c degrees without change in colour. Drying speicifications: 8 h at 20 c degrees 50 min. At 80 c degrees 30 min. At 100 c degress 20 min. At 140 c degrees Packaged in 24.5 kg can
Dyo acrylic top coat 2k polyurethane acrylic based car repair paint. Has high gloss, gloss retention, high mechanical and chemical resistance and high flexibility. High resistance against gasoline, adverse weather conditions, industrial air pollution and salt spray. Drying specifications: 8 h at 20 c degrees 30 min. At 60 c degress 7 min. Infrared short wave 10 min. Infrared long wave Packaged in 18 kg can
1 k dyo - pox primer It is used as air drying primer on iron and steel surfaces and also light metals. Air drying syntetic, oven drying topcoat can be applied. Drying specifications: Thorough drying 20 mins. At 20 c degrees Hard drying 72 hours at 20 c degrees Packaged in 22 kg cans.
Yt-2k solid colors: 1) tinter for two-pack, single coat luxury vehicle solid colour coating 2) high hardness 3) good gloss and build 4) good resistance 5) extremely good hiding 6) colour is bright and long lasting 7) substrates: A) dried and sanded existing finishes B) yt-2k and 1k primer surfacer C) yt-222 putty 8) surface cleaning: remove wax, silicon and other impurities with degreaser Packing: 1l x 8 tins/ctn, 3.75l x 4 tins/ctn
Yt-1k metallic colors: 1) made of several durability-improved resins 2) high quality basecoat 3) good coverage 4) can be blended to optimum metallic, solid or pearl colour effects 5) excellent adhesion and intercoat adhesion 6) substrates: A) existing finishes that have been de-greased and sanded with #1000 wet sanding B) yt-2k primer surfacer, C) yt-222 putty coated surface 7) surface cleaning: remove wax , silicon and other impurities with degreaser Outer packing: 1l x 8 tins/ctn, 3.75l x 4 tins/ctn
YT-2000 series clear coat: 1) Medium solid 2) Double component mirror clear coat 3) Suitable for overall refinishing and panel or spot repairs 4) High gloss 5) Good chemical resistance and color retention 6) Available in kit: 5L clear coat + 2.5L hardener + 1L thinner Outer packing: 5L + 2.5L+1L/kit/ctn YT-8000MS standard clear coat: 1) High performance double component clear coat 2) Suitable for overall refinishing and panel or spot repairs 3) Super high gloss 4) Good chemical resistance 5) Excellent gloss and color retention Outer packing: 4L x 6 tins/ctn, 1L x 8 tins/ctn YT-8000HS high solid clear coat: 1) High concentrated double component clear coat 2) High gloss and high solid 3) Good gloss consistency 4) Excellent chemical resistance 5) Use with: PU-2KHS (high solid hardener) Outer packing: 4L x 6 tins/ctn, 1L x 8 tins/ctn
Breathecoat smooth Its a membrane paint that allows moisture in cement to escape without chipping or pealing in the process. Its a very good product for use in coastal areas as the humid conditions doesnt affect the painting of this product 5l and 20l powder packaging
