Paints, bonding liquids, sealers, varnishes, industrial, intumescent coatings and niche market systems.
Coatings tested and approved by pra (uk); cetec, csiro, unsw (aus); csir, up, saia and sabs (rsa).
Products comply to green building council regulations (Aus & RSA).
Strong dirt resistance;
Easy application
Rapid drying speed,
12000 times for scrub resistance.
Method
* surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
* mix well before painting, plus proper clean water for diluting and mix well.
* stop application when temperature is below 8 celsius
* proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
* application tools: brush, roller, and spray
*consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index
This product conforms to china national mandatory standard:gb/t9756-2001
*appearance: white viscous liquid
*solvent type: water-base
*color: white
* gloss: matt
*to touch: 0.5-1 hours
*viscosity: 100 ku
*solid content:53%
*voc: ín47 g/l
Waterborne assist non-odour.
Super dirt resistance,
Water resistance and breathe freely,
Non-yellowing,
Outstanding hiding and adhesion,
50000 times for scrub resistance.
Method
Surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
Mix well before painting, plus proper clean water for diluting and mix well.
Stop application when temperature is below 8 celsius
Proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
Application tools: brush, roller, and spray
Consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index:
This product conforms to china national mandatory standard:gb/t9756-2001
Appearance: white viscous liquid
Solvent type: water-base
Color: white
Gloss: matt
To touch: 0.5-1 hours
Viscosity:100 ku
Solid content:57%
Voc: ín 47 g/l
Full matt paint film,
Excellent mildew resistance, algae resistance and health.
Strong adherence performance
Water resistance and breathe freely,
Lasting light color, strong tarnish resistance,
Outstanding hiding and coverage, smooth feeling,
Easy application and rapid drying speed,
80000 times for scrub resistance.
Method
* surface preparation: the grease, dust, moisture, rust on the bonding surface must be cleaned off. Make sure that the surface must be dry during rainy days, or it will cause non-stick atmosphere.
* mix well before painting, plus proper clean water for diluting and mix well.
* stop application when temperature is below 8 celsius
* proposed painting 2 times and recoat interval should be over 2 hours (depend on touch dry).
* application tools: brush, roller, and spray
*consumption: the theoretical value - 8 to 12 m2 / time/kg (the thickness dry coating film is 30 microns) (actual consumption may vary due to different construction method, dryness and hardness level of the base surface, roughness and construction environment)
Attention
Shelf life: 24 months in sealed cans.
Storage condition: keep it out of touch of children, store in cool, dry and ventilated place. The storing temperature shall range 5-35 celsius,
Thinned paint should not be poured back to the original can.
Technical index:
This product conforms to china national mandatory standard:gb/t9756-2001
*appearance: white viscous liquid
*solvent type: water-base
*color: white
* gloss: matt
*to touch: 0.5-1 hours
*viscosity:100 ku
*solid content:59%
*voc: ín47 g/l
Series exterior Lifespan Feature
Exterior paint series 1 2 years 1.Paint film smooth and solid
2.Good weather resistance
3.Water-resistent, alkali-resistent, scrub-resistenrt
4.Good coverage ability and economically
Exterior paint series 3 3 years 1. Firm tensile tenacious, glossy
2. Anti-sunshine and anti watering
3. Strong adhesion
4. Strong coverage ability, anti-site,
Exterior paint series 6 5 years 1. High glossy
2. Outstanding dirt resistance, alkali resistance,
3. Outstanding water resistance, alkali resistance,
4. Outstanding coverage ability and leveling property and easy application
Exterior paint series 9 More than 8 years 1. Excellent light glossy
2. Excellent anti-dirt resistance
3. Strong weather resistance
4. Strong coverage ability and good levelling property
1l drum; 5l drum; 18l drum
6501 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
1. According to the customers requirement, we can provide the product with content of tetrahydro resin acid between 30-60%; and we can also provide special products with low softening point.
2.Uses: used in adhesives, coatings, inks, solder material and solder flux, cosmetics, food industry, etc.
Description
1.Air-cleaning;2. Self-cleaning;3. Anti-bacteria;4. Water-cleaning: purify the water pollution and the organic injurant in the water; 5.Increasing the concentration of minus oxygen hydronium: nanometered titanium dioxide can produce the minus oxygen hydronium under the sunshine as if the effect is produced by thunder strom to make the air much fresher.
Application
Use for textiles, wood board and other hydrophilic material, or use for surface treatment of base material can soakage with water; also can be added into painting and coating.
Packing
Plastic barrel in 5kg/20kg. Or upto customer's requirement.
Plastic barrel in 5kg/20kg. Or upto customer's requirement.
Specifications and Properties:
Colors Available: Black, gray, metallic color and silver dots, etc;
Solid Content %: 28-30)f+ 0.2
Cure Temperature Range (380-400)
Cure time: 10minutes
Theoretical Coverage: 6.5f+ 0.2m2/KG 12»~15»
Certificates: FDA / LMBG / RoHS / SGS
Coating flux uses a combination of PTFE resin and super-heat-resistant resin. With excellent adhesion strength, good hiding power, age resistance and weather resistance when used on the surface of aluminum, stainless steel, and ordinary steel.
Model NO.: 9906
Unit Price/Payment: T/T, L/C.
Sea-ion 316 is specially designed for recycling disk. It can remove the uv glue, metal reflecting layer, dyestuff and printing ink quickly and thoroughly. The product is non-toxic and inodorous. Its quality is stable. Cooperate with the sea-ion process technology; it is a necessary product for waste disk recovery processing enterprises. No damage to substrate material, high recovery rate, after cleaning, the pc is transparent & bright, high added value. No need to use concentrated sulfuric acid, complete process need only one step, simple and safe. Cleaning time is short, save energy, increase production efficiency.
Our products:
1. Sea-ion 301-woven bag printing ink normal temperature detergent
2. Sea-ion 302 po/ps acidophilus milk bottle printing ink normal temperature detergent
3. Pe/pp bottle printing ink detergent
4. Sea-ion 311 bottle flake degumming agent
5. Sea-ion 312 pc car lampshade film and paint detergent
6. Sea-ion 313-pc mobile phone frame depainting agent
7. Sea-ion 315 pc nursing bottle ink detergent
8. Sea-ion 316 pc disk paint and film detergent
9. Sea-ion 317 pc eyeglass color and film detergent
10. Sea-ion 318 pc glass frame depainting agent
Rockmax Swelling 101 is a hydrophilic swelling waterstop. The based material is bentonite clay with polymer rubber. The product swell when contact with water create more than 300% expansion. The release benonite fill void between the two portion of concrete joint. Use in basement slab, wall, retaining wall, pile cap.
25mm x 20mm x 6meter (30meter per box)
20mm x 10mm x 9meter (54meter per box).
