High Quality 1HD Spray Paint Due to spray paint's versatility, it can be used on many different surfaces such as plastic, metal, wood, ceramic, plaster, concrete, canvas, particle board, laminate, glass, and many more!
A wide range solvent based Nitro wood stains formulated from a special binders, dispersed in suitable solvent to emphasize teire colouristics effec . Stain can be mixed with any kind of solvents base products , nitro , polyurethane , enamel , acrylic , etc.... Ideally suitable for all types of wood new and old , previously cleaned and sanded .
Industrial Finishes & Epoxy Ps1201- Penetrating Sealer (Sb) Ps1201- Texotile Epoxy Primer Ps1301- Red Oxide Primer Ps1311- Synthetic Primer Ps1351- Synthetic Wood Primer Ps1401- Zinc Phosphate Primer Ps1471- Quick Drying Primer (Matt) Ps1501- Epoxy Primer Clear Ps1551- Epoxy Primer Ps1552- Epoxy Red Oxide Primer Ps1554- Epoxy Zinc Chromate Primer Ps1601- Etch Primer Ps1701- Epoxy Zinc Rich Primer Ps2011- Epoxy Putty Ps2401- Texoile Epoxy Compound Ps2501- Synthetic Undercoat Ps3001- Synthetic Alkyd Topcoat Enamel (Standard) Ps3005- Synthetic Alkyd Topcoat Enamel (Standard) Ps3105- Thermoplastic Topcoat (White) Ps3106- Chlorinated Rubber Topcoat PS3151- THERMOPLASTIC TOPCOAT (CLEAR) PS3201- QUICK DRYING ENAMEL PS3251- SYNTHETIC TOPCOAT CLEAR PS3261- SYNTHETIC ALKYD TOPCOAT ENAMEL (SEMI GLOSSY) PS3271- PARQUET VARNISH PS3351- SYNTHETIC ALKYD TOPCOAT ENAMEL (MATT) PS3401- ALUMINUM PAINT PS3402- ALUMINUM PAINT HEAT RESISTANCE PS3501- STOVING TOPCOAT PS3601- EPOXY FLOOR COATING PS3651- EPOXY TOPCOAT CLEAR PS3751- ACRYLIC ROAD MARKING PAINT PS3751- THERMOPLASTIC TOPCOAT PS3851- ACRYLIC 2K TOPCOAT (HB) BASECOAT METALLIC (1K) -XXXXX BASECOAT METALLIC (2K)- XXXXX ACRYLIC 2K PRIMER- XXXXX CR ROAD MARKING PAINT- XXXXX DIPPING ENAMEL- XXXXX PU BASECOAT CLEAR-XXXXX PU BASECOAT PIGMENTED- XXXXX PU TOPCOAT CLEAR- XXXXX PU TOPCOAT CLEAR (ACRYLIC)- XXXXX PU TOPCOAT PIGMENTED- XXXXX QUICK DRYING PRIMER (SG) - XXXXX PS1302 - Synthetic Red Oxide Primer Commercial THINNERS ZINC SILICATE PRIMER- XXXXX PS1302 - Synthetic Red Oxide Primer Commercial
Water borne wood filler based on acrylic copolymer resin blended with modified pigments, is designed for the filling of surface irregularities holes and cracks. Ideal for Interior and Exterior use on all types of timber, e.g. natural, chipboard, plywood, etc especially for filling cracks, imperfections, and similar uneven surfaces of wood.
Synthetic Primer is based on Alkyd resin containing anticorrosive pigments. It is used as a primer coat for many applications and is quite versatile. It forms a firm base with good adhesion for Ritver Topcoat enamels. Substrates: Metals and Steel. Area of Use: Interiors and Exteriors.
Ritver All Weather Smooth Emulsion (Silk) is a premium grade high performance acrylic topcoat formulated from special latex with inert pigments. The product has good alkali resistance properties and it is extremely low toxicity and odour. Ritver All Weather smooth Emulsion (Silk) has very good weather resistance, durability and can be an ideal choice for a good protective finish. It has very low dirt pick up and flexibility extends through a wide range of temperature Substrates: Concrete, plaster, masonry, brick work and timber. Area of Use: Recommended for Interior and Exterior.
Various categories of thinners are classified as per the usage, the chemistry and the chemical composition. The details are given in the form of a table in the contents. The end user may use the thinner as per the need of his application referring to the same or consulting with the Ritver technical department. As per the required category. (Thinners of Different nature). Water White/ Transparent.
Ritver Synthetic Alkyd Topcoat Enamel (Matt) is based on Alkyd resin, containing Titanium dioxide and other carefully chosen pigments and additives for achieving a matt surface. It is a product used as general purpose Topcoat enamel which is very versatile and can withstand wide range of temperatures. It has good adhesion and exhibits matt effect after drying. Substrates: Plaster, masonry, brickwork, block work, wood work and metals. Area of Use: Interiors and Exteriors.
Fire Retardant Paints Available At Affordable Rates Directly By Wholesalers & Manufacturer. High Performance, High Build, Fire Retardant Coating Designed To Be Used On Walls, Gypsum. Competitive Price. Quality Assurance.
Commercial grade two components Polyurethane Topcoat, formulated with solid content combined with fast drying, good transparency, flow, and leveling characteristics, provides the excellent equalization of the matt effect. Combined with the high mechanical resistant and soft slippery touch that enhances the overall beauty and feasibility of the finishing product. USES For interior use on all furnishings as wardrobes, closet, paneling, doors, windows, frame, and casting, etc. The overall characteristics such as extensibility, Matt effect equalization, transparency and resistance to polishing have been developed to the maximum which in turn enables the product to have almost unlimited possibilities in the furniture industry.
Two components Acrylic Topcoat White Gloss, formulated with non-yellowing content combined with good pigment endowed with good flow ,and leveling characteristics provides the excellent equalization of the gloss effect combined with the high mechanical resistant , and soft touch that enhance the overall beauty and practicality of the finishing product. USES Applicable on pale wood as [maple, birch ash, reconstructed veneers, and further coatings as white or pastel colored the surfaces and protect them from yellowing.
Wood Coating 1 NC Grain Filler 2 NC Sanding Sealer 3 NC Clear Lacquer 4 2K Melamine 5 Wood Guard Polish 6 Wood Stain 7 Clear Varnish 8 1K Polyurethane Wood Finish Thinners 1 Thinner-700/701/713 2 Thinner-911/999 3 Thinner-PU/D.A.A./Retarder/ EPOXY/Stoving Anticorrosives & Water Proofing Insulating Varnish
water based ptfe coating applied to household appliance Typical products:Electric rice cooker, electric iron, electric pressure cooker ,hairdressing clip and so on . property requirements : non-stick property, high temperature stability , anti-corrosion property. Recommendations: Household appliance requires the coating for fine heat endurance ,scratch resistance and anti-corrosion property . Excellent products could be found in water-base ptfe non-stick coating ,ceramic coating or solvent-base ptfe non-stick coating.
COILCOAT SUPER is Coil Coating for Foundry Industry Refractories in India by Calderys refractories. These Coil Coating Applications are Material With High Alumina & Less Impurities for Outer Lining Surface Cools that Extends the Lining Life and Coil Life with Thermal Furnace Coil Protection.
AKFIX 1044 is a very fast set, 2-component, 100% solid flexible coating derived from a reaction of an isocyanate prepolymer and an amine terminated resin blend. This general purpose aromatic pure polyurea has been especially designed to protect and coat concrete, metal, wood, ceramic, geotextile surfaces. The product reacts within seconds and once cured, leaves a flexible, durable, tough surface. Its extremely fast gel time makes it suitable for applications down to -20 �°C without special conditioning of the component resins and isocyanates. It is relatively moisture and temperature insensitive, allowing application in the most problematic ambient conditions. The material must be applied utilizing high pressure, heated plural component spray proportioning equipment. %100 solid, VOC free, no solvents No catalyst Fast reactivity and fast return to service time Seamless and joint-less coating Little or no odor Excellent thermal stability Water resistant Excellent adhesion on concrete, steel, aluminum, plastics, fibers, wood, foam etc. Excellent flexibility Non sensitivity to temperature and humidity Excellent chemical resistance Excellent impact and abrasion resistance Anticorrosive Very good tensile and structural strength UV, chlorine and saltwater resistant High application thickness possible Variable application thickness possible Broad color spectrum
Wipe O Rust is a Nano-Engineered Anti Corrosion Paint for metal surfaces. The paint provides superior protection to metasurfaces which are prone to high corrosion rates. The paint is a single coat system offering high gloss to the coated surface. Technical Details Coverage area : 50 to 53 Sq.ft*/litre (2 coat) Drying time : 45 min (Recoat Frequency : 2hrs) Solid content : 50 to 60 wt% Coverage: 50 to 53* sq.ft./lt Drying Time : 45 minutes Recoat frequency : 2 hours Specific gravity @ 30 C, gms/ cc 1.2 Salt spray test as per ASTM B117 (5% NaCl) Less than 5% creep at 700 hrs
Pigeon O Shiled is a nanostructured Transparent Fire Retardant Coating. The coating retards the spreading of fire without changing the appearance of the surface. Recommended Surfaces : Painted wall, Painted metal, Concrete, Brick, Wood Application Areas : Apartments, Houses, Industrial areas where pigeons are more Packaging Size : 300ml (spray cans) Coverage Area : 13 to 15 Sq.ft./can (2 coats) Shelf life : 1 Year Dry Time : 45 mins
Rust O Clear is a Nano structured transparent anticorrosion coating for all grades stainless steel and aluminum surfaces. The coating inhibits corrosion for an extended period of time. Recommended Surfaces : Stainless Steel, Aluminum Packaging Size : 1 litre Coverage Area : 70 to 72 Sq.ft./lt (2 Coats) Shelf life : 1 Year Electrochemical : Corrosion inhibition efficiency 99% for 1200 hours Dry Time : 30mins
Infracut Clear is a Nano Structured Transparent Solar Heat Reflective Coating for Glass Surface. The coating prevents the solar rays from passing into the building interiors. Recommended Surfaces : Glass Packaging Size : 300ml (Spray Can) Coverage Area : 20 to 22 Sq.ft./can (2 Coats) Shelf life : 1 year IR Reflective (800 nm to 2.5 micrometre) : >80% Dry Time : 30 mins
Unflammo is a water based transparent Nnaostructured Fire Retardant Coating. The coating retards the spreading of fire without changing the appearance of the surface. Recommended Surfaces : Fabric, Wood Packaging Size : 1 litre Coverage Area : 53 to 55 Sq.ft./ft (2 coats) Shelf life : 1 Year Application Areas : Fire Department Equipment's, Safety Fabrics, Wooden Houses and Furnitures, Industrial Clothings, Wooden surfaces in Chemical Industries.
