Low prices!
Dyeing of all metal parts.
Work pieces dyeing with the dimensions of 2800 2000 1000 mm.
Colour palette according to RAL Product List.
We work with powder paints from the Turkish manufacturer.
Shockproof anti-corrosion coating that is resistant to mechanical damage.
Reliable electrical insulation , it cannot be affected by temperatures from -60°C to +150°C.
The coating is completely harmless to human health and safety and the environment, as at its formation any flammable and toxic substances are not applied.
Order our services!
Abrasion, corrosion, impact resistant, blast mitigating, and waterproofing coatings used in a multitude of applications, surfaces, and industries to protect your investment.
110 gallon sets, 55 gallons A Component and 55 gallons B Component
Apeg with active groups can react with active hydrogen or double bonds. It can be used in modified silicone graft reaction and dispersant in polymer materials. It is an important raw material of polycarboxylate water-reducing agent. Apeg also can be used as the chemical intermediate in other industries, such as paper making, coating etc.
Packed in new iron drums of 200kgs net each for liquid to solid apeg; pp woven bags of 25kgs net each for flakes.
Keep under ventilated and dry place. Validity period is 12months.
As methyl replace hydrogen for hydrosilylation, it eliminates the reactions between hydrogen and silicon-oxygen bond, which effectively reduce the viscosity, increase the effective content, improve the silicone oil polyether modified quality, inhibit secondary reaction, increase the goods stability of storage.
Packed in new iron drums of 200kgs net each.
Keep under ventilated and dry place. Validity period is one year.
6596 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
Polyetheramine D-2000 is a member of polyamine family having repeat oxypropylene units in the backbone. It is a difunctional primary amine with an average molecular weight of about 2,000. Its amine groups are located on secondary carbon atoms at the ends of an aliphatic polyether chain. It is light in color and low in viscosity. Its vapor pressure is extremely low. Polyetheramine D-2000 is completely miscible in a wide variety of solvents. It is, however, only slightly soluble in water.
Packed in drums of 200kgs each with nitrogen. Validity period is one year in shadow.
Description:
This product is quick-dried acrylic aerosol paint, with convenient application, perfect atomization and high emission rate. Its paint film has high plumpness, good adhesion and rich colors. It is widely used for metal, wood materials and ABS plastic etc.
Applications:
The paints can provide films with excellent weather resistance, good leveling, strong coverage, and match well with many types of primers. They can be widely used for all interior/exterior applications, for surface finishing of mechanical equipments and plastics. The films should avoid contacting with gasoline or other organic solvents.
Methyltrichlorosilane - cas 75-79-6. Monthly purchase –80 tons
Colorless (clear) liquid with a pungent odor, hydrolyzable with air moisture. Reacts with ethanol.
Physico-chemical properties of methyl trichlorosilane
The molecular weight 149.5
Density, g / cm3 1, 277
Mass fraction of basic substance, at least 99.6%
Mass fraction of chlorine, %, not less than 71.2
Mass fraction of impurities, 0.4%
Including - trimethylchlorosilane, not more than 0.05%
Including - dimethyldichlorosilane, not more than 0.4%
Including - 2, 2, 3-trimethylbutane and 2.4 dimethylpentane, not more than 0.05%
Boiling point, ° c 66, 4
Melting point, ° c -90
Auto-ignition temperature, ° c 408
Flash point, ° c 6
The refractive index of 1.4110
Methyl silica gel cas 68554-70-1 monthly purchase – 20-25 tons
Physical and chemical properties
Name of parameter, measuring unit
Appearance, color Hard, wet, white, fine granulated product
Testing item Quality index Measured value
Mass content of hydrogen chloride, %, no more 1, 0 0, 96
Mass content of nonvolatile substances, %, at least 60, 0 62, 0
Usage - production of polymer silicone products.
A curing agent is a standard reactive polyamide intended for use in curing of epoxy resin .It is cut to 60 % solids by weight in xylene.
When cured with high molecule weight of epoxy resin .it is provides cured films with such
high orders desired at actual application field as good flexibility, simultaneously with good water resistance and good alkali resistance.
Thus desired for heavy duty primer coatings application of anti corrosion resistance.
Flooring-
a low viscosity, modified -aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.
RECOMMENDED APPLICATION
Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
SAFFRO'S aura Premium Gloss Enamel gives smooth,hard & glossy finish.Its dry film has good adhesion to the surface.It has very good flow and brushability. aura Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily
RECOMMENDED USE It is applied on furnitures,drums,barrels,household products,elecrical
motors,doors,windows and variety of other surfaces which are not
subjected to outdoor exposure
FINISH :smooth and glossy
COLOR As per shade card Including White and Black.
COVERING CAPACITY :7 to 9 sq.mt/lit/coat at 30 to 35 micron dry film thickness,depending
(ON SMOOTH MILD STEEL SURFACE) upon shades and surface.
DRYING TIME :Surface dry - Less than 3 hours.
:Hard dry - Less than 15 hours.
Second coat application period -After 10 hours
Above all properties depend upon temperature and humidity.
FLASH POINT :Above 30* C (86 *F)
THINNER RECOMMENDED :SAFFRO Synthetic G.P Thinner
METHOD OF APPLICATION :By Brush or spray at a pressure of 40 to 50 P.S.I
RECOMMENDED PRIMER :For Metal - SAFFRO R/O Z/C metal primer
- SAFFRO Zinc Chrome primer yellow
For Wood - SAFFRO Wood primer white
For Plaster - SAFFRO Cement primer (oil base)
DIRECTION FOR USE Remove dust,grease,oil,moisture,rust and other loose flakes etc.After
priming the surface with recommenden primer with over night drying &
sanding with emery paper,apply SAFFRO SHINE synthetic enamel using
recommended thinner.Allow first coat to dry for minimum 10 hours before
applying second coat.Stir the content thoroughly prior to use
No. Type SILK Interior Emulsion provides a luxurious finish and a silky glowing appearance to the wall.
1 FEATURES SILK Interior Emulsion is water based, Economical interior emulsion for distinctly rich and smooth finish as compared to distemper. Ideal combination of pigments & extenders mixed in a co-polymer emulsion for smooth and pleasant matt finish with Good washability.
2 RECOMMENDED APPLICATION SILK Interior Emulsion is an interior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and matt
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
BUILDER COAT Acrylic Interior | Exterior emulsion is matt finish.
FEATURES :-
BUILDERCOAT Acrylic INTERIOR | EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
RECOMMENDED USE :-
BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA :-
COLOURS : White & other shades
FINISH : Smooth and Matt
COVERAGE : On smooth primer masonry surface by brushing
1 coat: 130-160 sq. ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc)
DRYING TIME : Surface drying time â?? 10-15 minutes
GLOSS LEVELS/SHEEN LEVELS : Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 18 months from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior and exterior wall finish with silicon additives.
FEATURES :-
ULTRA PREMIUM weatherproof interior and exterior emulsion is specially formulated to withstand extreme tropical conditions of rainfall, humidity and heat
ULTRA PREMIUM provides excellent resistance from growth of algae and fungi on the walls. This prevents appearance of black spots due to algal growth.
ULTRA PREMIUM provides extremely good protection against alkali and UV degradation, thus ensuring that the shade doesnâ??t fade for a long time and the paint lasts longer.
RECOMMENDED USE :-
ULTRA PREMIUM Acrylic interior and exterior emulsion is interior and exterior wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA :-
COLOURS : White & other shades
FINISH : Smooth and soft sheen
COVERAGE : On smooth primer masonry surface by brushing
1 coat: 140-170 sq. ft/ltr
2 coats: 85-95 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc)
DRYING TIME : Surface drying time â?? 30 minutes
GLOSS LEVELS/SHEEN LEVELS : Silky smooth with soft sheen
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 18 month from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA :-
ABRASION RESISTANCE : Excellent
WATER RESISTANCE : Excellent
REMARKS : 1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints.
5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
6) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application.
7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Pure Acrylic Emulsion with high sheen.
1 FEATURES It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
2 RECOMMENDED APPLICATION STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and high sheen
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth with high sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
No ABRASION RESISTANCE Excellent
1. WATER RESISTANCE Excellent
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats.
1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.
2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
6596 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
