Adhesive back layer and skid-resistant surface offers a convenient low cost method to reduce slippery floors,stairs or shower and bath bottoms. Good to use around swimming pool,on skateboard or in marine to prevent skid,water or chemical splash. Color options : black, gray, white, clear, red, yellow, blue, green, transparent, yellow/black or red / white diagonal. Grit size: 24, 36, 46, 60, 80, 100 Width: 1",2",4",6",8"...20"...47" Length: 60FT, 150FT etc. Pass ASTM D1894-11(slip resistance test)
Industrial winding Tape. Used in repairing and protection of power electrical pipeline. Reinforcement and protection of cables & Joints.
Jacobs 20 Bus Bar Tape is heat shrinkable tape specifically designed for insulating and protecting medium voltage bus bar connections, where tubing can not be used. It is very conformable, tough, waterproof tape with speciak adhesive coating which bonds well to most surfaces over a wide range of temperature . The shrinking action achieves exceptional conformation to contours, squeezing the adhesive into all surface irregularities, forming an affctive seal. FEATURES & BENIFITS :- Meets ANSI C37.20.2 standerds for MV switchgear application up to 36 KV. it is mainly used for insulating, anti-corrosive and mending purposes at the bending part. protects against accidental flash-over. Halogen free & anti-tracking. Meets IP 68 (Ingress Protection)
Jacobs 10 Butyl Tape a solution designed for taping gaps and cracks. solution for waterproofing, sealing and insulation. APPLICATION All metas, HDPE, LPDE, PP, and all other polythylene. works on wood, metal, tile, concrete, glass, plastic aluminium, dry wall and much more. All weather resist dryink cracking and peeling caused by sunlight, heat, cold, moisture and works in both hot and cold temperature. can be applied over crack gap joints, pin- holes, etc..... KET FEATURE Permanent solution for water leakage No Expertise Required No Messy Surface Easy & Quick Application Reasonable price very economical sticks to any substance good UV resistance for material protection Good weathering properties Self Adhesive Usage Direction : The surface must be clean. cut to tape required length remove the protective film. stick to tape desired area and press it firmly.
Tapes
Radium tapes Reflective tape can be used in many different applications like Vehicles, trailers, bikes, and motorcycles. It is self-adhesive and very easy to install tape as you only need to remove the plastic sheets behind the radium tape. Colours Available - Yellow, White, Red, Zebra colour Width available 48mm Roll of length 50m
bopp self adhesive tape , Masking tape , Tissue tape , Double side tape ,insulation tape , vinayl tape , plastic strapping roll ( p.p. & pet ) woven sack fabrics, flexible packaging materials , carry bags , electrical switches, plastic carry bags,
Product Description : Seam sealing tape made with PEVA film + hot melt glue, with very good adheison,widly used on medical cloth and protective suit sealing. Price of product ( USD price or FOB price) : $0.01 - $0.02 per meter Product origin : Hangzhou, China Key Specifications/Special Features : Thickness: 0.17mm Regular Width: 18mm/20mm/1020mm Regualr Length: 100m/200m/1000m Adhesive: Hot Melt With ISO 9001, SGS report, TDS Port of Loading: Ningbo or Shanghai, China Payment Term: TT,L/C,DP Delivery time: under 7 days Minimum Order Size and Packaging details : 20mm x 100m 60 rolls per carton 20mm x 200m 40 rolls per carton 1020mm x 1000m each roll per pack MOQ 1 carton or 1 roll
Product Description : OPP packing tape made with BOPP film + glue, with very good adheison,widly used on packing and carton sealing Product origin : Hangzhou, China Key Specifications/Special Features : "Thickness: 36mic to 90mic Regular Width: 48mm/1280mm Regualr Length: 100m/4000m Adhesive: Arylic Water base or Solvent or Hot Melt With ISO 9001, SGS report, TDS Port of Loading: Ningbo or Shanghai, China Payment Term: TT,L/C,DP Delivery time: under 21 days Minimum Order Size and Packaging details : "48mm x 100m 36 rolls per carton 1280mm x 4000m each roll per pack MOQ 1 carton or 1 roll
a therapeutic tool and has become increasingly popular within the sporting arena. K Tape has been used for a long time for the prevention and treatment of sporting injuries. Kensio Tape is not only used for sporting injuries but for a variety of other conditions. There are many proposed benefits to KT, including: proprioceptive facilitation; reduced muscle fatigue; muscle facilitation; reduced delayed-onset muscle soreness; pain inhibition; enhanced healing, such as reducing oedema, and improvement of lymphatic drainage and blood flow. In the same time, Kinesiology Tape is increasingly being used by women in beauty. Kinesiology Taping is manufactured pre-stretched by 15-25% as it is applied to the backing paper. It is characterised by the ability to stretch to 120-140% of its original length and, following application, recoil back towards its unstretched length. Kinesiology Tape purportedly mimics the physical qualities of the skin as it is believed to be the same weight and thickness of the epidermis along with its inherent elastic properties. It is comprised of polymer elastic wrapped in 100% cotton fibres, which allows for evaporation of moisture. The glue is heat-activated and is applied in a wave-like pattern to mimic the qualities of the fingerprint on the finger tip. K Tape is both waterproof and breathable and it can be worn during exercise, showering and even swimming. It dries quickly and seldom causes skin irritation, however; if skin irritation does occur, advice patient to remove tape immediately and wash the area with warm soapy water to remove any residual adhesive.
Feature *Brand: Dowell *Adhesive Type:single sided *Adhesion:strong adhesion *180 Peel strength:3N/25mm *Roll length:50meter *Design: blue Color *Advantage:tear resistance is not easy to break
Shenhen Dowell Adhesive Products .,Lld Characteristic:High temperature resistance, solvent resistance, and no residual adhesive, Excellent resistance to chemicals, chemicals and moisture resistance etc. Feature 1.Available in variety of colors. 2.Sorting and packaging efficiently in production control. 3.Adds aesthetic look to your package Application Suitable for automobile, iron or plastic parts furniture surface high temperature paint protection, but also suitable for electronics, electrical appliances, varistors, circuit boards and other industries
Product features 1, good thermal stability, can work at 180 for a long time, short time can withstand 260 high temperature. 2, soft tear resistance, strong adhesion, not easy to deformation, suitable for all kinds of profiles surface paste protection. 3. There is no glue residue. When tearing the adhesive tape after curing at high temperature for a long time, no glue residue is left. 4, high mechanical strength, suitable for the coil wrapped tightly and firmly. 5,High moisture resistance and insulation.
Product introduction: Polyimide(PI)High temperature adhesive tape uses polyimide film as the base material ,which is coated with high temperature silicone glue.It has the characteristics of high temperature resistance, corrosion resistance, high adhesion, soft and fit, and no residual adhesive.Temperature resistance is usually between 120 and320 degrees.
We are pleased to introduce ourselves as north indian original manufacturers of marking tapes/ hot stamping foil/ pigment foil/ thermal coding foils which is used for marking/printing/coding of details on electrical cables sheathed with pvc/hdpe/nylon/xlpe and plastic pipes of pvc/hdpe/nylon and rubber. Our marking tape is available in white, black, orange, yellow, blue, green and red colors. We have all facilities to develop any specific color shed as per customer choice. The pigments, chemicals and coating technique is such that it sustains extreme weather conditions (-40 to +55degree Celsius). You get good printing results even if dye temperature is low. Ink gets good transfer results at 60-70 degree Celsius. Print is fairly resistant to water and rubbing. It is available in roll/spool of 1000meter to 3000meter length on 25mm id plastic core. We are also marking tapes in jumbo spool/bobbin of 20,000 meters length (20Km). We are making tape in width 6mm, 7.5mm, 9mm and 10mm. However, we can make it in any width ranging from 6mm to 610mm.
Polyimide consisting of a polyimide film and silicone adhesive designed for high temperature masking applications, including the protection of gold edge fingers and edge connectors during wave soldering and reflow soldering processes within the PCB assembly industry. It is used in electrical insulation application meeting class H requirements. Main Features: . Thin and conformable enabling masking of uneven sufaces. . Wide operaturing tempreture range up to 500��F. . Excellent electrical insulation . Remove clearly without adhesive residue after exposure to heat/chemical Applications: . Masking for protection of gold fingers and edge connectors during wave soldering and reflow soldering processes or solder dip process within the PCB assembly industry. . Release surface in fabrication of parts cured at elevated temperatures. . Widely used for electrical insulation on transformer, motor, coil, PCB masking and so on. PE film and Paper carton sizes.
This tape is with a courier of PET film , coating silicone adhesive on one side of it. The tape can be used to protect the surface during powder spraying and curing process in industry. Due to an excellent feature of silicone adhesive, it will leave no residue on surface after peeling away. Backing Film Thickness: 0.050,0.002 mm Total Thickness: 0.080,0.002mm Tensile Strength: 160N/25mm Elongation: 70% Adhesion to Stainsteel: 8.50N/25mm Operating Temperature: 180 30Mins no residue. Maximum width: 980mm Minimum width: 3mm Standard roll length: 33m, 50m, 66m.
Very soft copper foil backing and a unique electrically conductive pressure-sensitive acrylic adhesive. ? Conductive acrylic adhesive ? Supplied on a removable liner for easy handling and diecutting. Copper tape is typically used for applications requiring excellent electrical conductivity from the application substrate through the adhesive to the foil backing. Common uses include grounding and EMI shielding in equipment, components, shielded rooms, etc. The copper foil backing is solderable and resists oxidation and discoloration. For Copper Tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (30 MHz to 1 GHz). 50m per roll.
PTFE Packing With Chemical Resistance And Low Friction CoefficienT PTFE packing or Teflon packing is a braided packing made of high purity PTFE (poly tetrafluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material. In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications). Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy. COMMON SPECIFICATION Maximum Temperature 280 °C Pressure Rotating 1.5 MPa Reciprocating 10 MPa Valve 15 MPa Velocity 5 m/s pH 0 to 14 Density 1.41.6 g/cm3 Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9 1/2 5/9 5/8 3/4 7/8 1 Cross Section (mm) 3 5 6.5 8 9.5 11 12.5 14 16 19 22 25 FEATURES Long lasting performance. Good flexibility and compressibility. Tough interlock braid. Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali. Low friction. APPLICATIONS PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital. White PTFE packing is applied in the valve. PTFE packing for valve
Description Cross Filament Tape has fibreglass reinforced backing which is very high in tensile strength and is coated with Acrylic adhesive. The fibreglass reinforced backing provides excellent abrasion, moisture and scuff resistance. Application: For heavy duty packaging adhesive tape of polyester film to which high strength glass fibre yarn filaments are laminated for bundling of heavy objects such as engg. Pipes, steel coils, tyres. Holding components & assembly parts in refrigerator. suitable for palletising export cargo & packaging heavy cartons.
