PTFE Teflon Tape1. Low density 0.2g/cm3 PTFE Teflon Tape is ideal for systems with water,drinking water and compressed air. Max. pipe diameter: 3/4". Temperature resistant from -200C to +80 C. Max. pressure: 10 bar.2. Miduim density 0.35g/cm3 PTFE Teflon Tape is ideal for systems with drinking water and air. Max. pipe diameter: 3/4". Temperature resistant from -200C to +100C. Max. pressure: 20 bar.3. Miduim density 0.6g/cm3 PTFE Teflon Tape is Ideal for steam. Economical in use. Pipe diameter: 3/4 - 2. Recommended temperature range from -200C to +160C.4. Density 0.7g/cm3 PTFE Teflon Tape is ideal for steam. In addition, ideal for most chemicals, acids, bases, solvents, etc. Max. pipe diameter: 11/4". Max. pressure: 30 bar. Also useful for hydraulics. Temperature resistant from -200 C to +180 C.5. High density 1.0g/cm3 PTFE Teflon Tape is approved for gas and drinking water and is ideal for hydraulics. Temperature is resistant from -200 to +260.6. Density 1.1g/cm3 PTFE Teflon Tape is for systems where requirements for quality and safety have high priority. It is very strong and economical in use. It is less suitable for fine thread. Temperature resistant from -200 to +260. 7. Density 1.3g/cm3 PTFE Teflon Tape is Ideal for use in situations where there are high requirements for e.g. acid-resistance, pressure or heat. This product is very diffusion-proof and is therefore highly suitable for oil, petrol and diesel. APPROVED for gas and drinking water (EN 751-3 and DIN 30660). Otherwise same use as for other high-density tapes. Temperature resistant from -200 C to +260 C.1.Different colors could be offered. And we could produce 200000 rolls per day. So the quantity and quality could be guaranteed.2.PTFE Tape is packed with carton case and OEM is available3.We put your order into our tight production schedule, ensure your punctual delivery time.Q: How to know the quality of ptfe thread seal tape A: In general, the quality of ptfe tape depends on the toughness and the color. Higher the toughness and purer the color, better the quality.Q: How about your packing A:Our general packing is 10pcs/shrink,250pcs/inner box,500pcs or 1000pcs/cartonIf you have your own packing,we can make it based on your requirement.FUJIAN BLEA SEA INDUSTRIAL CO.,LTD is specialized in manufacturing faucet,angle valve,plumbing hose,floor drain,drainer,ptfe thread seal tape and other sanitary ware productions.Now we have 2 factories with more than 200 employees,covering an area of 20,000 square meter construction area.our market is in Europe,Middle East, Eastern Europe,South America,Southeast Asia,South Asia,North Africa and other countries and area.
Knitted tapes manufactur in tirupur and twill tapes and elastic tape and other materials
Rachel knitted tapes manufactur in tirupur Knitted tapes and elastic tape and other materials
We are one of the leading manufacturer and distributor of a wide range of Adhesive Tape We produce: Caution Tape Double Sided Tape PVC Tape OPP Tape Masking Tape Floor Marking Tape Cloth Tape Paper Gummed Tape Cellulose Tape Aluminium Foil Tape Kapton Tape Colour Tape Paper Kraft Tape Protective Tape Antistatic Tape Silver Duct Tape Hazard Warning Tape Insulating Tape Filament Tape Teflon Tape Conductive Grip Tape
1. BOPP tape slitting machine 2. widht:1300MM/1600MM 3. Including 1set bopp tape slitting rewinding machine +1set paper tube cutting machine +1set paper tube loading machine + 1set rewinding machine
We are in the position to supply Greek and Balkan market as well as Eastern Europe with various grades of flexible packaging films, labels and adhesive tapes. The material we offer is made in USA and classified as b grade / Stock lot material. For more details pls get in contact at:
For Use In Improve Your Cutting During Carton Punching
Use In Improve Your Cutting During Die Punching
Supply Ability Supply Ability: 20000 Roll/Rolls per Day Packaging & Delivery Packaging Details: 25 rolls/ box, 50 Rolls/box Port: Da Nang, Vietnam Pre-taped Masking Film with Masking Tape Product Description Multi-Folded plastic film Easy to apply and remove with tape (cloth tape and masking tape) Specially treated film clings to surfaces and is easy to clean up. Prevent paint flake (Fully treated Film) Logo can be printed according to your requirements
BOPP Film, Hotmelt, acyrilic, natural Rubber HOTMELT TAPE: Thickness :25 µm, Color: transparent, brown,white, HEAT RESISTANCE:0°C / 50°C, Stickness:11(N/25mm) WATER BASED ACRYLIC TAPE: Thickness :25 µm, Color: transparent, brown,white, HEAT RESISTANCE:-20°C / 80°C, Stickness:10(N/25mm) SOLVENT ACRYLIC TAPE: Thickness :25 µm, Color: transparent, brown,white, HEAT RESISTANCE:-20°C / 80°C, Stickness:12(N/25mm) NATURAL RUBBER TAPE: Thickness :25 µm, Color: transparent, brown,white, HEAT RESISTANCE:-20°C / 80°C, Stickness:13(N/25mm)
Acrclic Tissue Tape, Midtransparent, Silicon White Paper, Stickness:14,Thickness: 140 Hotmelt Tissue Tape:Midtransparent, Silicon White Paper Stickness:22,Thickness: 110 Solvent Acyrilic Tape: Midtransparent, Silicon White Paper, Stickness:16,Thickness: 110
HDPE 13/6/4 x1000 mts BOPP 13/6/4 x1000 mts Permanent Tape
Double sided reinforced transfer tape. Higher adhesion strength; suitable for the adhesion to insulation layer of floor; plastic articles; foam; textiles; non-weaving fabrics and PU. 40 / 60 / 80 / 100 / 120 microns total thickness. Synthetic rubber hotmelt adhesive or water based acrylic adhesive. Havana yellow, white siliconised paper or white PE filmic liner. Jumbo roll size is 1020mm x 250 meters
Product name: PET flakes Color: Green Hot washed Impurity: less than 0.03% PVC: less than 0.05%
PTFE Thread Seal Tape 1 2 x 2601 PTFE Thread Seal Tape 1 2 x 260 is processing technology advanced. 2 PTFE Thread Seal Tape 1 2 x 260 is the thread sealing tape which is widely used in applicable strong oxidant,Website:http://www.fjbluesea.com, strong acid, oxygen, gas, high temperature steam and various chemical corrosive of Pipes and valves interface. 3 PTFE Thread Seal Tape 1 2 x 260 can be long term used in the temperature between -190°C to +360°C.4 PTFE Thread Seal Tape 1 2 x 260 is used in hardware, construction, chemical and electronic, national defence, transport, medicine and other areas.1.25 years experience in manufacturing and selling, service will be more professional2.Large-scale production line will make more rapid delivery3.We have advanced equipment & skilled workman and will have better quality control4.We are factory with 200 workers,15000 m2 workshop and we can promise the Punctual delivery.5.One hour reaching Xiamen port helps save the exportation cost 6.Free samples and Small orders are welcomedQ: Are you trading company or manufacturer ?A: We are professional manufacturer ptfe thread seal tape,Anaerobic Ahesives & Sealant as well as faucet,angle valve,shower hose and other sanitary ware products.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.Q: What is your terms of payment ?A: Payment�1000 USD, 100% in advance. Payment�1000 USD, 30% T/T in advance ,balance against the copy of BL. And we also accept LC at sight.1.OEM is accepted2.We will reply you within 24 hours.3.We can assure the quality.4.Sample is free.5.We can pick you from xiamen or jinjiang airport or Quanzhou station when you come to visit us.FUJIAN BLEA SEA INDUSTRIAL CO.,LTD is specialized in manufacturing faucet,angle valve,plumbing hose,floor drain,drainer,ptfe thread seal tape and other sanitary ware productions.
Customized Thermally Conductive Transfer Insulation Adhesive Tape Material: Silicone Rubber Use: Warning Adhesive Side: Double Sided Adhesive: Rubber Adhesive Type: Water Activated Feature: Heat-Resistant Design Printing: No Printing Place of Origin: Guangdong, China (Mainland) Brand Name: laimeisi Model Number: Thermal conductive tape Thermal conductive: 0.5~0.73W/mk Hardness: 75~80Shore Specific Gravity: 1.72~1.84g/cm3 Certification: ROHS Thickness: 0.2~0.45mm Tensile Strength: Over 120Kgf/cm Continuous Use Temp: -40~260â?? Size: Customizable Color: Grey,Black Product name: Customized Thermally Conductive Transfer Insulation Adhesive Tape Within 5-15 working days after your payment Packing Details :Standard & customized Port: Shenzhen or other ports in China FEATURE OF SILICONE THERMAL BONDING HEAT ADHESIVE TAPES 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent. 2.Good thermal conductivity 3.Excellent adhesion strength 4.Stable properties and low cost 5.Various sizes available. APPLICATION OF SILICONE THERMAL BONDING HEAT ADHESIVE TAPES 1. LED tube; LED light; LED lamp;LED backlight;LED lightbar 2. Assemble Heat sink device and FH 3. Assemble Article light components and Metal frame 4..Automotive, electronics and lighting sectors, amongst others.
Thermal Conductive Insulation Adhesive Back Copper Foil Tape Material: Copper foil, Copper foil, Nano carbon, Thermal materials Use: Carton Sealing Adhesive Side: Single Sided Adhesive: Acrylic Adhesive Type: Hot Melt Feature: Heat-Resistant Design Printing: No Printing Place of Origin: Guangdong, China (Mainland) Brand Name: Laimeisi Model Number: LMS Product name: Thermal Conductive Insulation Adhesive Back Copper Foil Tape Color: Gold Size: Customized Size Certification: SGS, ISO,Reach, Rohs Surface: Polished Length: 100m Thickness: 55-75um Shape: Customised Thermal conductivity: 560W/mk Packaging & Delivery Packaging Details: Following the customer request Delivery Detail: Shipped in 3 days after payment 1. Grade: SGS, REACH, ROHS 2. Size: customized 3. Standard: LMS-TB Product Nameï¼?Thermal Conductive Insulation Adhesive Back Copper Foil Tape Materialï¼?Copper foil, Nanocarbon, Thermal materials Colorï¼?Black Sizeï¼?Customized size Gradeï¼?SGS, ROHS, Reach Usedï¼?Thermal conductive, high temperature, Led, PC, Heat sink...etc Thicknessï¼?55um, 75um Thermal Conductivityï¼?560w/mk Glueï¼? 3M Feature of Thermal Conductive Insulation Adhesive Back Copper Foil Tape 1.Excellent resistance to heat (dry air), at +260o C continuous and +260o C intermittent.Remains flexible at low temperatures of -40oC. 2.Resistant to ultra-violet light, ozone and weathering processing,pharma ceutical and cosmetic manufacturing area. 3.Good electrical insulation properties 4.Keep constant even at high temperatures. 5.Resistance to chemicals; moderate resistance to general chemical products. Application of Thermal Conductive Insulation Adhesive Back Copper Foil Tape Cooling fin and the heat diffusion film, electronic equipment cooling, Other application need to heat or Conductive, eg: LED light, CPU, GPU, IC, PC...etc.
As we believe in client's supremacy, we decide the acceptable payment methods at the time of undertaking the agreement/contract. Moreover, our payment processing methods are secured. The organization has laid its foundation stone in Morbi(India) and covers a wide area for catering to the customers.
Acrylic carton sealing tapes are the best solution for reliable, all-temperature and allweather box sealing performance. Designed for applications requiring excellent clarity and projects where resistance to aging, weathering, uv light and yellowing are important. Top quality acrylic adhesive provides higher shear strength and superior quick stick performance while controlled unwind facilitates dispensing operations on manual or automatic case sealing machines.
Hot melt adhesive tape is made of bopp film coated with theâ the synthetic rubber . It could change theirâ physical properties as the temperature , but theâ chemical property doesn't change . It is no smell and â non-poisonous, hot-melt adhesive its non-toxic and tasteless, is an environmentally friendly chemical products 1) strong adhesion and tenacity, resistance to tear and agingâ â 2) sustained adhesion: 24hrsâ 3)material:bopp film with hotmelt adhesive 4)length: 25-1, 000m (popular:50, 60, 66, 80, 90y, 110y, 100m, ...) 5) width: 24-144mm(popular:24, 36, , 45, 47, 48, 50, 55, 60, 72, 76, 96mm) 6)thickness: 39-85î¼ (popular:40, 42, 45, 50, 60mic...) 7) colors: clear 8) competitive price&high quality&timely delivery 9)no pollution
