Product To Be Packed - Powder
Machine - Schute Base Ffs
Control - Continuous Motion
Temperature Controller - Pid/digital Type
Speed Control - Step Less Output Speed Control By Vfd
Unwinding System - Simplex
Sealing System - Heat Sealers
Pouch Type - Centre Seal Pouch/three Side Seal/four Side Seal
Filling System - Cup Filling System
Product Hopper Capacity - 8-15 Kg
All Product Contact Parts - All Contact Parts Food Grade Stainless Steel
Motor - ½ H.P 1 Phase-crompton Make
Power Supply - 220 V + 2% With Neutral Ac Supply At 50 Hertz.
Accuracy - + 2%
Machine Weight - Approx 300kg
Speed - Up To 60ppm
(depending Upon The Product And Quantity To Be Packed)
Output & Accuracy Depends On Following:
Filling System
Machine Type :- Schute Based Pneumatic F.F.S Machine
Filling System :-cup Filler
Packing Weght :- 10-100gms
Product To Be Pack :- Snacks/tea
Covering :- Full Stainless Steel
Speed :- Upto 50 Ppm
Special :-digital Temperature Controller With Pouch Counter Meter.
And All Pneumatic System Is Janatic /festo Etc Make.
Motor :- 1/2 H.P Single Phase-01 No:: 1-1/2h.P 3phase-01 No:1h.P 3phase-01no
Clutch Brake-15 Torque-01no: All Motors Are Crompton Make
Weight :-400 Kgs (approx)
Filling Accuracy :- +/- 2% Depending Upon Product And Its Density
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material.
Characteristics:
1.Having two colors printing device can be chosen
2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw.
3.Printing, feeding, and packing can complete in one processing.
4.Packing straw length is adjustable within a certain range.
Specification
Drink Straw Diameter(mm) 5-12mm
Need change some parts.
Straw Length(mm) Standard: 190-210mm
Extra mould: 170-260mm
By change the sealing and cutting mold, printing cylinder
Packing Model Paper type: wrap paper
Sealing type: 3 side sealing
25-30mmï¼?Paper width: 25-30mm
Production Speed With printingï¼?300pcs/min
Without printingï¼?400pcs/min
Printing Printing Colorï¼?Double Colour
Printing type: flexographic
2.38mm;
Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm
Paper Unwinding Frame 1SET
Tension adjustï¼?Mechanical tension device, adjusted by manual
Wrap paper roller core sizeï¼?3inchï¼?4.7inch
Straw feeding hopper Material :Stainless steel frameï¼?
Plexiglass: Adjustable to match straw length
Straw down deviceï¼?induction and swing arm
Feeding modelï¼?by chain feeding
Printing Unit
Single/Double Color
Power transmission ï¼?By chain
Between printing unit: By gear
Traction unitï¼?1sets, rubber roller and chrome plated roller
Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller
Dry unitï¼?1SET , by hot air, with temperature
color registerï¼?By manual
Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual
Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple
Materialï¼?mould steel
Conveyor Belt 1setï¼? Synchronous reduction motor+ controller
Counter dam-brush: one set, lifting by pneumatic cylinder
Controller Counter and buzzersï¼?1setï¼?HUALI Brand
Controlling inverter: 1.1KW Schneider
Temperature controllerï¼?1setï¼?KEQIANG Brand
Low-voltage electric parts: Schneider
Total Power (Kw) 1.5 (220V)
Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H)
Weight (Kg) 400
6811 Packaging Machinery Suppliers
Short on time? Let Packaging Machinery sellers contact you.
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material.
Characteristics:
1.Having two colors printing device can be chosen
2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw.
3.Printing, feeding, and packing can complete in one processing.
4.Packing straw length is adjustable within a certain range.
Specification
Drink Straw Diameter(mm) 5-12mm
Need change some parts.
Straw Length(mm) Standard: 190-210mm
Extra mould: 170-260mm
By change the sealing and cutting mold, printing cylinder
Packing Model Paper type: wrap paper
Sealing type: 3 side sealing
25-30mmï¼?Paper width: 25-30mm
Production Speed With printingï¼?300pcs/min
Without printingï¼?400pcs/min
Printing Printing Colorï¼?Double Colour
Printing type: flexographic
2.38mm;
Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm
Paper Unwinding Frame 1SET
Tension adjustï¼?Mechanical tension device, adjusted by manual
Wrap paper roller core sizeï¼?3inchï¼?4.7inch
Straw feeding hopper Material :Stainless steel frameï¼?
Plexiglass: Adjustable to match straw length
Straw down deviceï¼?induction and swing arm
Feeding modelï¼?by chain feeding
Printing Unit
Single/Double Color
Power transmission ï¼?By chain
Between printing unit: By gear
Traction unitï¼?1sets, rubber roller and chrome plated roller
Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller
Dry unitï¼?1SET , by hot air, with temperature
color registerï¼?By manual
Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual
Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple
Materialï¼?mould steel
Conveyor Belt 1setï¼? Synchronous reduction motor+ controller
Counter dam-brush: one set, lifting by pneumatic cylinder
Controller Counter and buzzersï¼?1setï¼?HUALI Brand
Controlling inverter: 1.1KW Schneider
Temperature controllerï¼?1setï¼?KEQIANG Brand
Low-voltage electric parts: Schneider
Total Power (Kw) 1.5 (220V)
Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H)
Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material.
Characteristics:
1.Having two colors printing device can be chosen
2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw.
3.Printing, feeding, and packing can complete in one processing.
4.Packing straw length is adjustable within a certain range.
Specification
Drink Straw Diameter(mm) 5-12mm
Need change some parts.
Straw Length(mm) Standard: 190-210mm
Extra mould: 170-260mm
By change the sealing and cutting mold, printing cylinder
Packing Model Paper type: wrap paper
Sealing type: 3 side sealing
25-30mmï¼?Paper width: 25-30mm
Production Speed With printingï¼?300pcs/min
Without printingï¼?400pcs/min
Printing Printing Colorï¼?Double Colour
Printing type: flexographic
2.38mm;
Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm
Paper Unwinding Frame 1SET
Tension adjustï¼?Mechanical tension device, adjusted by manual
Wrap paper roller core sizeï¼?3inchï¼?4.7inch
Straw feeding hopper Material :Stainless steel frameï¼?
Plexiglass: Adjustable to match straw length
Straw down deviceï¼?induction and swing arm
Feeding modelï¼?by chain feeding
Printing Unit
Single/Double Color
Power transmission ï¼?By chain
Between printing unit: By gear
Traction unitï¼?1sets, rubber roller and chrome plated roller
Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller
Dry unitï¼?1SET , by hot air, with temperature
color registerï¼?By manual
Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual
Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple
Materialï¼?mould steel
Conveyor Belt 1setï¼? Synchronous reduction motor+ controller
Counter dam-brush: one set, lifting by pneumatic cylinder
Controller Counter and buzzersï¼?1setï¼?HUALI Brand
Controlling inverter: 1.1KW Schneider
Temperature controllerï¼?1setï¼?KEQIANG Brand
Low-voltage electric parts: Schneider
Total Power (Kw) 1.5 (220V)
Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H)
Weight (Kg) 400
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material.
Characteristics:
1.Having two colors printing device can be chosen
2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw.
3.Printing, feeding, and packing can complete in one processing.
4.Packing straw length is adjustable within a certain range.
Specification
Drink Straw Diameter(mm) 5-12mm
Need change some parts.
Straw Length(mm) Standard: 190-210mm
Extra mould: 170-260mm
By change the sealing and cutting mold, printing cylinder
Packing Model Paper type: wrap paper
Sealing type: 3 side sealing
25-30mmï¼?Paper width: 25-30mm
Production Speed With printingï¼?300pcs/min
Without printingï¼?400pcs/min
Printing Printing Colorï¼?Double Colour
Printing type: flexographic
2.38mm;
Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm
Paper Unwinding Frame 1SET
Tension adjustï¼?Mechanical tension device, adjusted by manual
Wrap paper roller core sizeï¼?3inchï¼?4.7inch
Straw feeding hopper Material :Stainless steel frameï¼?
Plexiglass: Adjustable to match straw length
Straw down deviceï¼?induction and swing arm
Feeding modelï¼?by chain feeding
Printing Unit
Single/Double Color
Power transmission ï¼?By chain
Between printing unit: By gear
Traction unitï¼?1sets, rubber roller and chrome plated roller
Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller
Dry unitï¼?1SET , by hot air, with temperature
color registerï¼?By manual
Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual
Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple
Materialï¼?mould steel
Conveyor Belt 1setï¼? Synchronous reduction motor+ controller
Counter dam-brush: one set, lifting by pneumatic cylinder
Controller Counter and buzzersï¼?1setï¼?HUALI Brand
Controlling inverter: 1.1KW Schneider
Temperature controllerï¼?1setï¼?KEQIANG Brand
Low-voltage electric parts: Schneider
Total Power (Kw) 1.5 (220V)
Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H)
Weight (Kg) 400
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW
3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
13 4-6 corner
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
ModelZH-A1100PC
Suitable materialCard board,E flute corrugated board
Max methodAutomatic continuous feeding
Max mechanical speed450m/min
Overall dimension15500*1700*1800mm
Weight8T
Power consumption19KW
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
ModelZH-A1100PC
Suitable materialCard board,E flute corrugated board
Max methodAutomatic continuous feeding
Max mechanical speed450m/min
Overall dimension15500*1700*1800mm
Weight8T
Power consumption19KW
haracteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
ModelZH-A1100PC
Suitable materialCard board,E flute corrugated board
Max methodAutomatic continuous feeding
Max mechanical speed450m/min
Overall dimension15500*1700*1800mm
Weight8T
Power consumption19KW
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
2. Main technical parameter:
Model ZH-A1100PC
Suitable material Card board,E flute corrugated board
Max method Automatic continuous feeding
Max mechanical speed 450m/min
Overall dimension 15500*1700*1800mm
Weight 8T
Power consumption 19KW
3.Standard & Optional configuration list
Configuration Units Standard Optional
1 Feeder section
2 Paper Alignment Section
3 Pre-fold Section
4 Crash lock bottom section
5 Upper paste barrel equipment
6 Down pasting equipment
7 Gluing system
8 Grinder device
9 Plasma treatment system
10 Folding and closing section
11 Trombone section
12 Air compressor
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope).
This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline.
1. Reliable sheet separation
2. No-stop feeder
3. Easy regulation and paper positioning, accurate paper positioning
4. Ensuring under high speeds.
5. High quality electronic parts.
6. High Production efficiency.
7. Operator Friendly.
Technical parameter:
Model HP-250A
Paper weight 60 - 200 g/m²
Output per hour 5000 - 18000 pieces
Size ranges envelopes mm 40x70 - 120x250
inch 1.57x2.75 - 4.72x9.84
Connected load 7.75kw
Weight 1300kg
Dimensions 5100x850x1100mm
Process sketch map:
Our advantage:
1. The TOP professional manufacturer in china.
2. 24 hours service hotline, solve customers problem.
3. High cost-effective
4. After-sale service: timely and considerate
Sample show:
Picture in stock:
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:50 USD/day (within guarantee time)
100 USD/day (without guarantee time)
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron
1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly.
2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape.
3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine.
4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position.
Main Technical
Model TC-650A
Paper grams 200-1000g/m2
Work capacity 5000 pcs/h
Blank length 150-560mm
(5.91-22.04inch)
Blank width 120-500mm
(4.72-19.68inch)
Film length 30-300mm
(1.18-11.81inch)
Film width 40-300mm
(1.57-11.81inch)
Film thickness 0.08-0.30
Main Motor power 7kw
Weight 3000kg
Machine size(LxWxH) 6500x1200x1600 mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron
1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly.
2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape.
3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine.
4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position.
Main Technical
Model TC-650A
Paper grams 200-1000g/m2
Work capacity 5000 pcs/h
Blank length 150-560mm
(5.91-22.04inch)
Blank width 120-500mm
(4.72-19.68inch)
Film length 30-300mm
(1.18-11.81inch)
Film width 40-300mm
(1.57-11.81inch)
Film thickness 0.08-0.30
Main Motor power 7kw
Weight 3000kg
Machine size(LxWxH) 6500x1200x1600 mm
Our service
1.One year guarantee time.
2.Present a set of wearing parts in wooden case before delivering the machine for free.
3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
We are the super power pack system Manufacturer and Exporter Place Jaipur India Automatic Powder Packing Machine This machine is a very low price machine. We have made it for special machine powder in which you can make powder from 15 grams and up to 500 grams of powder. The powder can be roasted up to 6% in the powder and can be done on many different types of powder, but more than 6% automatic machine is very simple. Online video calling machine can be installation electrical diagram with the machine and very run this machine are operating manuals now.
Filling Range - 25gms to 500gms
Electricity required -3.5kw
6811 Packaging Machinery Suppliers
Short on time? Let Packaging Machinery sellers contact you.
