Compostable Bags
Non Woven Bags
These bags are made of Kraft Paper Laminated with PP / HDPE fabric and are, Centre Sealed Bags with 3-4 colors printing as per customer requirement. Kraft, Liner bags can be made from 15" to 23.5" in width & 25" to 43" in length. KLB are, Gusseted / Non-Gusseted, Open Mouth, Top & Bottom Pasted with / without, Liner, with outside White / Brown Paper. These bags are strong and moisture, proof and on customer requirement can also be made with HMHDPE / LDPE, liners to give extra protection for products packed in it. They are widely used by, Dairies, Chemical, Fertilizers, Feeds, Gaur Gum, Food Industries & Resins, Manufacturers etc.
compostable bag...... certified by CPCB india
Tshirt bags PE bags Different colors, sizes, packaging as your requirement
Low Melt EVA Batch Inclusion Bags are specially designed industrial packaging bags used in the rubber and plastic compounding and mixing process. As the material of the bags has good compatibility with natural and synthetic rubber, the bags together with the materials contained can be direct put into an (banbury) mixer , and the bags will melt and fully disperse in the rubber as an effective ingredient. Main benefits of Zonpak Batch Inclusion Bags: Facilitate pre-weighing and handling of the materials. Assure accurate dosage of ingredients, improve batch to batch uniformity. Reduce spill losses, prevent material waste. Reduce dust fly, provide cleaner work environment. Improve the process efficiency, lower the comprehensive cost. Bags with different melting point (from 70 to 115 degree Celsius) are available for different rubber mixing conditions. Size and color can be customized according to the specific application requirement.
Conducting silks are knitted in the cloth material and hammock of the bag body, and combined with the usage of conducting film, the conducting function can worked through ground connection of conducting silks. It can effectively wipe out static electricity generated in filling and unloading materials prevent combustion and explosion and other dangerous conditions, is mainly used for packaging dangerous goods of chemical, medical and other industries. Leakage proof suture lines can be added where the suture is on the body of bag, leakage proof layer (PE internal pocket) can also be on the surface inside the body of bag to achieve the goal of leakage proof. It can also used for filling powdery and thick materials.
Jute And Jute Goods, Lether Bag, Paper Bag,.
Weight 50, 55, 60, 65, 70 up to 220 GSM or even higher as per requirement. Size from 30-220 cm Length as per requirement Colors white or as per requirement Imprint one or six colors imprint (on one side or both sides of the bag) Bag opening Zigzag, heat cut, hemmed PE Lining If required polyethylene lining can be sewn in Laminated/Coated available if required inside/outside Perforated yes if required Mesh 4.5 x 4.5 and up to 15 x 15 Packing 1000 bags per bale or as per requirement UV Stabilized As per requirement
Order number: 464300 External length: 165 mm External width: 130 mm Internal length: 150 mm Internal width: 100 mm Material: PET-NY-PE Thickness: 160 mu Closure: Security tape P620: Yes P650: Yes UN3373: Yes Air Transport: Yes Road Transport: Yes
For efficient and sustainable packaging of food and non-food, our new flat bags are the ideal choice. Available in fresh and popular colours such as; pink, light green, light grey and white. All bags com with a modern and stylish matt finish. Due to the material composition, these flat bags are fully recyclable and have an excellent barrier. They are very suitable for powders, sports supplements, pills, seeds, sweets, jewellery, creams, beads or to send samples to your customers. There is a choice of two sizes; 70mm x 110mm and 80mm x 130mm and they are very functional to use. The tearnotches (notches) allow the user to open them easily. All sizes and colours are available both with and without grip closure. Request a free sample or contact us to enquire about the possibilities of printing them and producing them completely customized for you. Standard colors: grey - pink - green - white Standard sizes: 70 x 110 mm - 80 x 130 mm Tailor made and printing possible from 10.000 pieces
The first fully recyclable shaped spouted pouch available on the market. Made entirely of a mono material (low density polyethylene with EVOH barrier properties) these pouches are 100% recyclable under the code 4 recycle code (most supermarket and recycle centres offer code 4 drop of points) The pouches are ideal for single use refills of for example; Cosmetics - Coffee scrubs, Dense soaps, gels, Shampoo, Conditioner, Shower gel, Concentrate for products such as (add water to mix) Soap / Detergents - Fabric softener, Car cleaning products, Screen washer fluid, Meal kit sauces / pasta. The pouches are pre-formed and can be filled by the opening on the top edge and sealed using conventional heat sealers â?? the end user can easily access the product by removing the tip of the shaped pouch & easily dose out through the created opening. Available in 5 formats â?? and from just 100 pieces per size. We can also provide you with a fully customized version â?? with full colour printing & custom format from just 10,000 pieces per size. Standard color: transparent Standard sizes: 50 ML - 100 ML - 250 ML - 330 ML - 500 ML - 1000 ML
Safetybags by DaklaPack Secondary leak proof packaging - 100% leak and tamper proof. Available in various sizes, suitable to hold a wide range of primary containers, such as blood tubes, specimen containers and swabs. The pouches are easy to close. They are sequentially numbered and incorporate a tamper-evident seal to ensure ease of identification and security throughout the chain of custody. The pouch is made of strong transparent polyethylene, and is guaranteed to keep liquid inside. Easy to close, simply removing the backing strip and applying even pressure across the strip, the pouch is then hermetically sealed. In combination with the transport blister, the PolyMed mailing envelope and sufficient absorbent material, this composition complies with the packaging regulations (P650 and P959). We would be happy to quote you for various formats and for printing, on request. UN3373 Standard â?? Key Requirements The P650 packaging instructions for liquid substances state:- The primary receptacle(s) shall be leak proof and must not contain more than 1L liquid, and not contain more than 1kg solid. The secondary packaging shall be leak proof for liquids; (DaklaPack's Safetybags) If multiple fragile primary receptacles are placed in a single secondary packaging, they shall be either individually wrapped or separated to prevent contact between them; (DaklaPack's Absorbing sheets + tube holders) If liquid, absorbent material shall be placed between the primary receptacles(s) and the secondary packaging. The absorbent material shall be in quantity sufficient to absorb the entire contents of the primary receptacle(s) so that any release of the liquid substance will not compromise the integrity of the cushioning material or of the outer packaging; The outer packaging must be rigid and must not contain more than 4L liquid or 4kg solid. One surface of the outer packaging must measure at least 100mm x 100mm (DaklaPack's boxes and shipping solutions are fully conform if there is any doubt as to whether or not residual liquid may be present in the primary receptacle during transport, then a packaging suitable for liquids, including absorbent materials, must be used.
100% leak proof, tamperproof and true 95kpa meets DOT and IATA requirements. We at DaklaPack recently designed and patented our own 95kpa Safetybags�® and have had them fully certified by the BVI. DaklaPackâ??s 95kPa transport bags are ideal to use as a secondary watertight receptacle in accordance with DOT and IATA regulations for shipping Biological Substances. DOT and IATA shipping regulations require that UN3373 Biological Substance, Category B specimens are transported in either a primary container or secondary packaging that has passed the 95kPa pressure differential test. Custom sizes and solutions can be made available - contact us for expert advise.
RigidSafetybag - combining 3 packaging elements into 1 & simplifying the packing process. The patented RigidSafetybag by DaklaPack consists of a 100% leak and tamper-proof Safetybag, a blister like tube holder surrounded with sufficient absorbing material to fully absorb any leaked content from the primary receptacle during the unlikely event of a leakage. Due to the rigid internal component, the filled and sealed RigidSafetybag can simply be entered into a fully labelled UN3373 envelope / box and sent to the receiver. Save time effort and money using this simple solution which is fully labelled with usage instruction and provides 100% tamper evidence due to its destructive seal and tamper text in the side seals.
DaklaPack - IV UV Protection bags Protect medication from harmful UV light! DaklaPackâ?? s IV UV Protection bags are ideal for protecting IV Infusions, medications, and even nutritional bags against harmful ultraviolet light. Ultraviolet light can cause oxidation, hydrolysis, and loss of potency to sensitive medications. Simply place the IV bag (even bottles, piggyback container & syringes) inside of the IV UV Protection bag to ensure medication potency. The amber colouration protects against UV light whilst offering enough transparency to check fluid levels & flow rates. available in 2 sizes - 135mm x 250mm + 200mm x 400mm and made from a strong 120micron Polyethylene. â?¢ Perfect for cytostatic iv bags & nutrition bags. â?¢ Manufactured from a strong ultraviolet inhabitant polyethylene â?¢ Tested from wavelength 500nm to 320nm with max 5.36% and min 0.15% across the spectrum â?¢ Fully evaluated by SGS and test reports are readily available with full wavelength transmittance curve. We can also provide you with custom sized IV UV protector bags, with a completely custom print, ideal for private health sector organisations. Contact us for more information.
Specification: Size:30*40*0.0045 cm or Customized Weight:14.0g/pc MOQ: 100 boxes Material: PBAT+PLA Color: White or customized Usage: Express, Mail Service, Apparel Packing, etc Features: Recyclable, Eco-friendly, Durable,Recyclable
Specification: Size : Customize Item Weight: 1Pounds Color:Brown Style: Closure Type Fold Top Usage:Home, wedding, parties etc. Features: Metal tabs allow easy opening and a secure closure, suitable for storing. The viewing window is good for seeing your goodies, the little party favor bags are better than plates or cups for the reason that guests could seal and take home.
Specification: Size: 16*12cm or customized MOQ: 5000 pieces Material: PLA Usage: express package Features: Frosted design, durable and safe
Specification: Size: 8/12/16oz MOQ: 5000 pieces Color: White Material: PLA+PBAT Certification: EN13432 COMPOST degradation certification Surface treatment: gravure printing Usage: Express packaging Features: 100% biodegradable
