Zro2 65.5min SiO2 33.10 1 ton Bulk Bags
Cr203 44% Typical 44.6% Si02 3% max Fe0 25.0% 1 ton Bulk Bags 40kg Bags 25 Kg Bags
# elements units specifications 1. Moisture 4.00% max 2. Fe 69.90 % max 3. SiO2 3.00 % max 4. AL2O3 0.73 % max 5. P 0.032 % max 6. S 0.024 % max
Chrmite ore Bulk 20 feet cont or as required
Chromite
Chromite concentrate
Potash feldspar
Perlite ore Perlite ore - foundry grade (unexpanded) Pkg : 50kg bags
Technical data of de filter aid rs-500 (equivalent to celatom fw-50) Appearance white flux-calcined product Moisture% 0.30 Specified gravity 2.55---2.35 Bulk density g/ml 0.37 Ph 10% slurry 9---10 Flow rate darcy 4.8-6.0 De brightness 85 Refractive index 1.46 Average particle micron 42a2 Ignition on loss% 2.0 Sio2% ¦89 Fe2o3% 2.0 Al2o3% 3.5 Cao% 1.16 Mgo% 0.17 Pb mg/kg 4.0 As mg/kg 5.0 Uses: to be used to filter beer, wine, brewage, syrups, sugar, glucose, algin, warnish, etc. Packing: in 20kgs bags of ply pp woven/ply craft paper Or in 300/450kgs jumbo bags
Diatomaceous earth (DE), also known as diatomite, diahydro, kieselguhr, kieselgur and Celite, is a sedimentary rock primarily composed of the fossilized remains of unicellular fresh water plants known as Diatoms. The typical chemical composition of diatomaceous earth is 86% silica, 5% sodium, 3% magnesium and 2% iron. The De has a high porosity, with lower density, larger surface area, strong absorption, good suspending performance, it has relative incompressibility and chemical stability without any poison and smell. Therefore, the diatomaceous earth and its products are used as a filter medium, especially for swimming pools. It is also used to filter beer,wine,glucose,syrups and sugar. Other industries such as paper, paints, ceramics, soap and detergents use it as a filling material. In 20kgs bags of ply pp woven/ply craft paper
It has been widely used to decolor and refine of the animal oil and fat, plant slipid and cosmetic raw material, petroleum industry, chemical industry for daily use, it has also been used in sewage disposal, filter noxious gas and catalyze petroleum in grain. In 25kgs bags of ply pp woven
Bismuth ingot Our offer as follows: Name:Bismuth ingot Purity:Bi:99.99%--99.997% Paking:In plywood case of 1000kgs net each Price:CIF main port usd....by sea Payment: by D/P at sight Shipment:T/T against fax the copy of bill of lading
Indium ingot Name: indium ingot Purity: in:99.993%--99.999% Paking: in plywood case of 25kg net each Price: cif main port usd...By air Payment:by t/t before shipment or by irrevocable l/c at sight Shipment:t/t against fax the copy of bill of lading
White Red Green silica 54.65 57.23 51.92 alumina 16.4 12 13.89 iron ox. 10.15 13.13 13.14 titania 1.2 1.5 1.3 lime coa 1.2 0.8 1.1 maginasia 2.02 3.2 5.1 lio 8.8 13.53 12.5 p.h. 8.09 8.3 8.09 Raw material lumps
Tantalite Ta205 34% nb205 36% sn02 0.01% I ton
Followed by as per is Approx 50 kg
Chemical analysis of CaCO3 99% The raw material MgCO 0,20% Fe2O3 0,010% HCI insoluble content 0,01% Specific product data fineness Residue on 60¦m sieve 0,01% Top cut (d98%) 24¦m Mean particle size (d50%) 4,30¦m Particles < 5 ¦m 55% Whiteness 99 % Brightness 96% Yellowness index 1,5 Moisture ex works 0,3% General product data packed bulk density 0, 9 g/ml pH value 9,5 Oil absorption 14 g/100g DOP absorption 18 g/100g Main applications particle size distribution 1 mtons / each big bags
Manganese-ore mgo-49% (rejection below 46%) Mn: ------------------------------ 49%min. Rejection below: 46% Fe :--------- ------ -------------6.00%max. Rejection above: 8.5%% Sio2 :---------- -----------------5.0% rejection above : 7.50% Al2o3:---------------------------6.5% max, rejection: 9.00%% Cao :--------------------------- 0.60% Mgo :--------------------------- 0.23% P: ---------------------------------0.10%, rejection: ---------0.12% C: ---------------------------------6.00% Page 2 of 4 5/12/2008 S:---------------------------------0.03%, rejection:---------0.09% Moisture content ----------8.00% max. Rejection:---------10.00% Physical characteristics/ore lumps size:------------3mm û 15mm in 90% min. Or as requested by the buyer. Bulk
We are a trading company we are looking for buyer for a minaral sand 40kg
Specifications analysis result Physical analysis Density (gr/cm3) min 4, 20 Hardness(moh's) 3 - 3, 5 Chemical analysis Sio2 ( % ) 0, 5 - 1, 5 Baso4 ( % ) 92 - 95 Al2o3 ( % ) 0, 1 - 0, 2 Fe2o3 ( % ) 0, 1 - 0, 3 Srso4(%) 1, 0 - 2, 0 General analysis Particle size distribution 45 micron ( % )9, 36 75 micron ( % )1, 22 Damp ( % )0, 02 Ph7, 5 Solubility (% m/m)0, 04 Solubility of alkali metals in water (ppm)101, 79 Particles < 6 mic (%)23 Big bags
