Find Verified Other Ores Minerals Suppliers, Manufacturers and Wholesalers

Beryllium Ore is a naturally occurring mineral resource containing beryllium-bearing minerals such as beryl and bertrandite. It is widely used in the aerospace, nuclear, electronics, defense, and metallurgical industries due to its exceptional strength, lightweight characteristics, and thermal stability. Our beryllium ore is sourced from reliable mines and processed to meet international industrial standards. The product is available in various grades and particle sizes according to customer requirements.

Potash Feldspar

We are exporting limited quantities to Glass Industries, Artificial Marble and granite industries and ceramic industries.

Granite Granules

Exporting limited quantities to Artificial Marble and Granite manufacturing Industries.

Calcite Granules

Exporting limited quantities to artificial marble and granite manufacturing industries.

Snorkel Radex Powder Uses in Ladle & Tundish at Steel Mills

We are the leading Manufacturer and Supplier of Raw vermiculite Flakes.

We ensure to provide good quality products to our custormers.

Exfoliated Gold Vermiculite Flakes is a hydrated magnesium aluminum sheet silicate mineral closely related to mica, and has all of the thermal and chemical resistance mica is known for. When subjected to heat, vermiculite expands and forms particles that are revered for being:

Lightweight
Incombustible
Compressible
Highly absorbent, soaking up to three times its volume in water
Non-reactive
Highly effective in cation exchange capacity

Exfoliated Silver Vermiculite Flakes is a hydrated magnesium aluminum sheet silicate mineral closely related to mica, and has all of the thermal and chemical resistance mica is known for. When subjected to heat, vermiculite expands and forms particles that are revered for being:

Lightweight
Incombustible
Compressible
Highly absorbent, soaking up to three times its volume in water
Non-reactive
Highly effective in cation exchange capacity

Product Type Specification Packing

Raw Vermiculite Size: 0.5 to 3 mm 35 kg PP Bag

Exfoliated Gold Vermiculite Size: 1- 3.5 mm LBD: 300
25 kg PP Bag

Exfoliated Silver Vermiculite Size: 1 -3.5 mm LBD: 150
18 kg PP Bag

Prominent & Leading Manufacturer and Exporter from Ahmedabad, we offer Minerals such as Fluorspar Lumps, Fluorspar Powder and Ramming Mass.

Our company offers fluorspar lumps for Caf2-85-90%;70-75% and 60-65% . It caters according to the varied requirements of the large number of industries.We are the importer of fluorspar from china and afganistan.It is mostly used in the steel industry as a flux agent for reducing sulphur and increasing fluidity of the metal and also for reducing slag.

We are leading manufacturer and supplier of Perlite Ore

Leading Manufacturer and Exporter of Perlite Products such as Perlite, Raw Perlite and Perlite Ore from Ahmedabad.

We are supplier of Vermiculite, It is used at Steel Industries

We are supplying qualitative range of Vermiculite Mineral. This hydrous phyllosilicate mineral is quarried from the best sources across the country and Suppling to customers.

Size : 0-4 mm
Size : 2-6mm

Features:

Heat Insulation Proper
Fire proof
Light weight
Eco friendly

Color : Light Green

We are offering a wide range of cast Iron Powder. Our offered cast iron powder is processed in line with global quality standards using the best quality basic chemicals at customer end. Tested on an assortment of parameters set by the industry, these are broadly demanded all across the globe.

We also have rich expertise in successfully handling the emerging requirements of Ladle Covering Compound Radex . These find usage as ladle and tundish covering compounds and have in them high insulating power along with good expandability as well as spread-ability. It instantly spreads to cover entire molten steel surface in ladle and tundish and helps in significantly reducing heat loss that occurs due to radiation from top surface of liquid steel. Further, it also helps in maintaining consistent temperature in ladle as well as in preventing temperature drop as well as freezing of metal in longer duration casting processes.

We are leading supplier of Nozzle Filling Compound. Carefully graded refractory Nozzle Filling Compound (NFC) which can be made as per the requirements of the customer's need for steel transfer ladle with slide gate system. Ladle Filler Sand. As it posses selected granulometry and high refractories, it does not sinter when in contact with molten steel around 1600 degree Centigrade temperature with high ferrostatic head when kept in ladle nozzle well cavity. Thus, it results into free flowing of NZ (Nozzlex) when slide gate is opened and it comes out freely or with minor oxygen lancing establishing a very smooth stream from the ladle. Ladle Filler Sand

Available in three types: Ladle Filler Sand

Chromite Base - Res-commended for Mild Steel Production
Zircon Basr- Recommended for Mild Steel Production
Quartz Base.

We are leading manufacturer , Exporter, Supplier of Rice Husk Ash.

Rice milling generates a by product know as husk . This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice , broken rice and bran .Rest 22 % of the weight of paddy is received as husk . This husk is used as fuel in the rice mills to generate steam for the parboiling process . This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process , is known as rice husk ash ( RHA ). This RHA in turn contains around 85 % - 90 % amorphous silica. So for every 1000 kgs of paddy milled , about 220 kgs ( 22 % ) of husk is produced , and when this husk is burnt in the boilers , about 55 kgs ( 25 % ) of RHA is generated.

India is a major rice producing country , and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy , producing energy through direct combustion and / or by gasification . About 20 million tones of RHA is produced annually. This RHA is a great environment threat causing damage to the land and the surrounding area in which it is dumped. Lots of ways are being thought of for disposing them by making commercial use of this RHA. The particle size of the cement is about 35 - 45 microns . There may be formation of void in the concrete mixes , if curing is not done in properly . This reduces the strength and quality of the concrete . Our product ? Silpozz ? which is made out of this RHA is finer than cement having very small particle size of 25 microns , so much so that it fills the interstices in between the cement in the aggregate. That is where the strength and density comes from. And that is why it can reduce the amount of cement in the concrete mix .

RHA is a good super-pozzolans . Silpozz can be used in a big way to make special concrete mixes . There is a growing demand for fine amorphous silica in the production of special cement and concrete mixes ,high performance concrete ,high strength, low permeability concrete, for use in bridges, marine environments , nuclear power plants etc. This market is currently filled by silica fume or micro silica , being imported from Norway, China and also from Burma . Due to limited supply of silica fumes in India and the demand being high the price of silica fume has risen to as much as US$ / ton in India.

Technical Specifications:

SiO2 : Silica 85 % minimum
Humidity:2 % maximum
Particle size: Powder or Flakes
Colour:Grey Black & White
Loss on ignition at 800C 4 % maximum

We are manufacturer of many kind of Radex Heat Insulation Compound with various chemistry. We provide many type of packing for smooth operations.

Ouir manufacturing capacity : 1500 mt per month

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00

About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.


GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk

Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3

Potash Feldspar:

We have come up as a dependable firm bringing forth Potash Feldspar all over the world. Based in India, we are exporting Potash Feldspar in varied quantity packs. Potash Feldspar are processed and are used for varied industrial applications. Further, we keeping in mind the budget constraints in mind, we offer Potash Feldspar at the market leading prices.

About Feldspar:
Feldspar is non-plastic Potassium or Sodium Alumino silicate mineral represented as KAlSi38or NaAlSi38. Feldspar is used generally for the following purposes :

Ceramic Manufacturing formulations : In making the body composition of several types of ceramics and in preparation of glazes and enamel, Glass Manufacturing and Abrasive Manufacturing.

It is used along with Ball Clay, Kaolin and quartz for tiles and sanitary Wares manufacturing. The presence of iron even in small quantity tends to impart coloration.