cylinder is widely used as wear-resistant ceramic liner for abrasive fluid conveying, its is typical application as ceramic lined steel pipe connected by flange. Chemshun Ceramics can offer custom-designed and manufactured abrasion resistant pipes with optimized wear characteristics for each individual application. >>> Chumshun pipe Size available Chemshun pipe Sizes ID: 10mm~500mm Thickness and length according to customer's needs more sizes and customized size acceptable >>> Chemical Composition: z Al2O3 SiO2 CaO MgO Na2O 92~93% 3~6% 1~1.6% 0.2~0.8% 0.1% >>> Physical properties: Specific gravity (g/cc) >3.60 Apparent porosity (%) 0 Flexural Strength (20 C, Mpa) 280 Compressive strength (20 C, Mpa) 850 Rockwell hardness (HRA) 80 Vickers hardness (hv) 1050 Moh's hardness (scale) =9 Thermal Expansion (20-800 C, x10-6/ C) 8 Crystal Size ( m) 1.3~3.0 Service: Any requirment about chemshun Alumina Ceramic Liner Vulcanized Into Rubber and wear resistant ceramic product Backing, alumina ceramic rubber wear plate and Wear Resistant Rubber Ceramic Panels, please feel free contact us and chemshun we'll afford you the most suitable product and best service. Export: Our products have been exported to many countries: Australia, Chile, USA, Russia, UK, Indonesia, etc., good quality have be approved by our clients .
Material: alumina 80%~97% Tolerance: +/-0.05mm
Physiologically harmless, suitable for food products Smooth surface to achieve good flowability and to avoid plugs No spilled material to clean up 2: ceramic tube pipe introduction : Chemshun alumina ceramic lined composite steel pipe not only has steel pipe characters of High-strength, good toughness, impact resistance, good weld-ability, but also has corundum Ceramics characters of high hardness, high wear resistance, corrosion resistance, heat Resistance. Which overcome disadvantages of steel low hardness, poor wear resistance And ceramics poor toughness, therefore, ceramic lined pipes have comprehensive property Of excellent wear resistance , hear resistance , corrosion resistance , mechanical shock and Thermal shock etc , it is the ideal pipeline of conveying sand , stone , coal , ash, molten Aluminum etc particles and corrosive medium, chemshun ceramics offers sophisticated Design and engineering capabilities of both standard and custom wear linings, installation And project management, as well as abrasion a udits of used wear linings. 3:technical data : 1) chemical data : Al2o3 sio2 cao mgo na2o 92~93% 3~6% 1~1.6% 0.2~0.8% 0.1% 2) physical data : Specific gravity (g/cc) >3.60 Apparent porosity (%) 0 Flexural strength (20 c, mpa) 280 Compressive strength (20 c, mpa) 850 Rockwell hardness (hra) 80 Vickers hardness (hv) 1050 Moh's hardness (scale) =9 Thermal expansion (20-800 c, x10-6/ c) 8 Crystal size (m) 1.3-3.0
Membrane oxygen generation system can be using for oxygen enriched combustionoxygen enriched ventilationhome oxygen barplateau oxygen breathingAeration in underground spacebiological fermentationã?�aquiculture and sewage disposal etc. Small component separator specifications : 1, 2, 3, 4, 5, 10, 15 l/min Medium production separator specifications : 10, 20, 30, 40, 50, 60, 100 Nm3 / hr Large plate membrane oxygen enrichment separator models1000ã?�2000ã?�2500ã?�3000ã?� 4000ã?�5000ã?�6000ã?�7500 Nm3/hr parallel for oxygen production0.150000 m3/h oxygen purity2335% Outlet pressure15KPa Spiral Oxygen enriched module(gas separation) Membrane oxygen generation system can be using for oxygen enriched combustionoxygen enriched ventilationhome oxygen barplateau oxygen breathingAeration in underground spacebiological fermentationã?�aquiculture and sewage disposal etc. Medium production separator specifications :30ã?�40ã?�50Nm3/hr Large plate membrane oxygen enrichment separator models1000ã?�2000ã?�2500ã?�3000ã?�4000ã?�5000ã?�6000ã?�7500 Nm3/hr parallel for oxygen production3050000 m3/h oxygen purity2335% Outlet pressure15KPa For further information on Oxygen enriched module products, please do not hesitate to contact our technical service team. We look forward to helping you meet all of your membrane needs. -
Pervaporation membranes can be classified into organic and inorganic membranes. NaA zeolite membrane, as an inorganic membrane, has well-defined zeolitic pores with high hydrophilicity. The pore size of NaA zeolite membrane is 0.42 nm, which is larger than water molecule (~ 2.9 A) and less than most of organic molecular diameters. Therefore, the membrane shows excellent permselectivity and flux for separation of water from organics. Compared to organic membranes, the zeolite membranes have several advantages including higher permeation flux, higher separation factor and better thermal/chemical stability. During the separation process, the feed solvent is introduced to the feed side of the membrane, and the H2O is removed from the permeate side. The low pressure of the permeate side is maintained by the use of a vacuum pump. Water molecules are preferentially adsorbed on the surface of the membrane, and then permeate through NaA zeolite membrane layer. The driving force of the process is the difference in the partial pressures of water across the membrane. In the feed side, the dehydrated product can be achieved on the retentateï¼?and the H2O in the permeate side is condensed and drained. Pervaporation process The pervaporation process is not limited to the gas/liquid equilibrium of the solvent. It can achieve high-purity solvent with low energy consumption, and separate solvents which are difficult to be achieved by traditional separation methods such as distillation, extraction and adsorption. It has obvious advantages for separation of azeotropic or close azeotropic mixtures and dehydration of solvents with minor or trace water, which is a promising technology for substitution of traditional separation technologies. It has a promising application in energy, petrochemical industry, biological medicine, electronics, environmental protection and other fields.
Ceramic coffee cup, filters are made from the most famous ceramic village in vietnam
Dt-300d Dt-300d double ceramic hob * voltage: 120v/240v * frequency: 50/60hz * power:120v~800w+1000w=1800w/240v~1200w+1800w=3000w * glass size: 288x510x4mm * body size: 288x510x80mm * temperature: 60~240â??, 10 levels * timer: 0~24h * n.W./g.W.: 6 kgs/7 kgs * loading quantity(20'/40'/40hq'): 800/1600/1900 DT-400G Double Ceramic hob -
The photosensitive sensor is currently the highest yield, the most widely used sensor, exist in the form of photosensitive resistance, along with the change of light intensity, the resistance value is also relatively change, resulting with the light intensity of the pulse signal. The structural elements of common cadmium sulphide photosensitive electrode are: electrode / cadmium sulfide / ceramic substrate / wire / resin moisture-proof film, etc.. Ceramic substrates have been widely used in photosensitive resistors. Product features: The ceramic circuit board has high accuracy and good electrical and thermal properties 2. Ceramic circuit board with high bonding strength and good weldability, can realize blind through hole 3. Ceramic circuit board technology is mature, environmental protection, pollution-free, cost is lower than traditional technology 4., a wide range of applications, single-sided and double-sided three-dimensional ceramic circuit boards can be produced 5. Customized production, without mold opening, short production cycle 6., no organic ingredients, resistant to cosmic radiation, high reliability in aviation and space, long service life. 7. Can carry out high-density assembly, line / pitch (l/s) resolution can reach 20 m, so as to realize the integration and miniaturization of equipment. 8. High frequency loss, it can be used in high frequency circuit. 9. Copper sealing, high reliability. 10. 3d substrate and 3d routing. 1. Ceramic circuit board appearance size is not limited 2., ceramic laser printing, three-dimensional routing 3. Ceramic circuit board without mask, fast response 4. Ceramic circuit board technology is mature, environmental protection, pollution-free
Item:ceramic 7pcs canister with iron stand Meterial: dolomite Dimension:Smallx4pcs :8.2*8.2*12cm Bigx3pcs:9.8*9.8*13.8cm Color: Assorted with ice anime pattern Logo: any logo is avaliable per your customer demand Service: OEM&ODM are welcome MOQ:600SETS
1. Material: There is a layer of ceramic ring(92% Alumina)inside of steel pipe, which is highly resistant to abrasion. 2. The advantage: 1, lower cost than the cast iron pipe and alloy steel pipe. 2, low density, low weight and convenient installation 3, unique abrasion and impact resistant 4, excellent corrosion resistant 5, smooth inner wall 3. Characteristics: 1. Wear resistance: the content of Alumina in ceramic layer of ceramic composite iron pipe is greater than 90 %, so it has high wear resistance, and its wear resistance is several times higher than that of medium carbon steel after quenching. 2. Corrosion resistance: the ceramic is neutral material, chemically stable, with excellent corrosion resistance and acid resistance, and can resist various inorganic acids, organic acids, organic solvents, etc. the corrosion resistance is more than ten times the stainless steel. 4. Application Fields: The ceramic steel pipe is used for transporting the industrial waste and some material, such as coal powder, liquid or solid, something with sharp-angled, etc. Therefore, the ceramic pipes are widely used in thermal industry, steel industry, mechanical industry, chemical industry mine, coal industry cement industry, smelting industry, river dredging, etc. 5.Specifications Accept custom-made.
1. Newly Structure and Material: The Ceramic Belt Scraper is a kind of new-style cleaning equipment for conveyer belt . This unique ceramic belt cleaner can be installed on a diagonal in front of the head pulley. You can adjust the spring-loaded holder and nuts to ensure full contact between conveyor belt and ceramic belt cleaner. The main material of the belt cleaner is ceramic blocks, which of more abrasion and corrosion resistance. The ceramic belt cleaner is 20 times of polyurethane, 5 - 10 times of steel, the effect produced by belt sweeper is unmatched by other materials, and the service life can reach more than one year. 2.Characteristics: Because ceramic belt cleaner is not absolutely parallel, the traditional sweeper is partially leave out, and the ceramic belt cleaner is installed on the belt roller part in the way of diagonal, and the effect of spring keeps it close to the belt, and its cleaning effect is obviously better than traditional sweeper. If the wear occurs after long-term use, only adjust the tightness of the spring to achieve the ideal working state. 3. The advantage: a. Excellent cleaning efficiency b. Less damage to the conveyor belt c. Longer service life, can reach 1 year for cleaning the coal powder, can up to 3 to 6 months for cleaning iron ore. d. Easy to install 4.Application Field and Usage: Used for cleaning Dry, Wet, Block, powder, sticky tailings or hot temperature object on the surface of conveyor belt at power plants, cement plants, coal mine, mining industry, etc. 5.Belt width: Usually, 600mm to 2400mm.We have our own professional factory, so we can produce ceramic belt cleaner according to buyer requirements.
Infrared Ceramic Heating Plate from Shanghai YiYou 1) Fast Response 2) Rapid heat-up 3) Rapid cool down 4) Ideal for fast cycling machines 5) Highly reflective aluminized internal surface 6) High radiant efficiency 7) Low convection losses 8) Large choice of power ratings available 9) Heater can be manufactured to suit most supply voltages. Applications: Mainly apply to car lacquer oven, glass machining, plastic, powder spread, typographic, paper making, textile, environmentalist, semiconductor, water treatment, food processing, analytical and pharmacy industry field.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well. The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically. Characteristics - Made of compound high strength soluble metals, guarantee the material strength under high temperature. - Customized formula and the solubility time is flexible. - Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days. - Special cracking technology - Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
We are factory with own design department, which could meet customer's any needs.Welcome to our visit our plant. 1. Specifications Inert alumina ceramic balls are widely used in petroleum, chemical, fertilizer, natural gas and environmental protection industry. 2. Product features: Alumina grinding beads is suitable for both wet and dry superfine grinding of alumina, zirconia silicate, feldspar, quartz, kaolin clay, glaze, inks and ceramics in stirred and ball mill. Key benefits: ·high grinding efficiency for superfine grinding.·fine chemical stability & contamination-free to the grinded material.·extremely low wear rate .·excellent combination of toughness and hardness .·technical support provided to optimize milling
1.Product description: Ceramic rubber liner is compounded by rubber sheet, flat or spherical ceramic tiles and Steel plate through hot vulcanizing process.It is fixed to equipment surface by means of bolts Connection. There are two types of ceramic surface:flat and spherical.Ceramic rubber liner is High wearable, high cut-resistant, and super impact-resistant. 2.Features: High wear and cut resistance High impact resistance 3.Technical parameters: 3.1.Aluminum oxide content of ceramic:92±1%;specific gravity of ceramic :3.6±0.1;hardness of ceramic:>mohs hardness 9;color: white. 3.2.Rubber:nr;speeling strength:=800n/cm 3.3.Steel plate:q235a 3.4.Selection principles: The impact surface of direct blanking point should adopt spherical ceramic rubber liner, Other abrasive surface could use flat ceramic rubber liner. 3.5.We can supply concrete working drawing. 3.6. The coefficient of friction Rubber pulley lagging ceramic pulley lagging Dry 0.40-0.50 0.70-0.80 Wet 0.20-0.25 0.40-0.80 Mud 0.18-0.20 0.40-0.50 Service life general longer (3-5 times) Feature suitable for humid and with ceramic feature Sticky conveying longer service life Material environment 4.Selection of standard ceramic liner: Surface shape of ceramic Spherical Flat Thickhess of steel plate :6mm;number of connecting bolts:2; exposed screw bolt length: 35mm. Note:we make products according to customers' requirements.
Model no. Ceramic balls Made in taiwan, roc Key features Black silicon nitride ball, gray silicon nitride ball, zirconia ball Material: silicon nitride (si3n4) , zirconia (zro2) , and alumina ( al2o3) Specification: 0.4mm~63.5mm , with different gauge. Precision: g5 ~ g20 Usage: for bearing, inspection, and other rolling conditions. We also offer grinding and mill ceramic balls. Payment terms:d/a , t/t , l/c
Introduction Chemxin molecular sieve type 4a is an alkali alumino silicate; it is the sodium form of the type a crystal structure. 4a molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). Chemxin type 4a molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger. Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxyde and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded. Regeneration Chemxin molecular sieve type 4a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 4a molecular sieve, a temperature of 250-280°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process Size 4a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm. Attention To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
Kohs Ceramics, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested
KOHS CERAMICS, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
KOHS CERAMICS, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
