Ores Minerals Suppliers and Manufacturers

Rock Phosphate is a mineral feedstock to produce phosphate fertilizers and phosphoric acid. Usage: Rock phosphate does not dissolve easily in water, making it difficult for plants to assimilate. Chemical conversion via phosphoric acid produces phosphate fertilizers, such as DAP, MAP and other ammonium phosphates, which are more easily assimilated by plants.

Gypsum powder is a superior construction material due to its ability to create an extremely comfortable and aesthetic ambience. It is a natural material, completely odourless, and is easily available in nature. Gypsum is a material that possesses a natural mechanism to perfectly balance indoor climate and humidity. There are a lot of exceptional features of gypsum products that make them perfect for indoor finishing. Gypsum products are environment-friendly and fire-resistant. We offer thermal as well as acoustic insulation. Application: Gypsum panel or building plasters, mould or statutes, grout of marble, clay and ceiling tiles, color additive and also act as an additive to other products. Packing: 25kg, 50kg and 1000kg jumbo bag. Item Specification Color White Initial Setting Time: Minutes 8- 12 Final Setting Time: Minutes 13 -18 Water Stucco Ratio %: 70 - 75 Compressive Strength: N/mm2 15 - 17 Flexural Strength N/mm2: 5 - 6 Fineness %: 200 mesh Sieve pass > 96 CASO4H2O %: > 97 Sodium Chloride %:

Quartz

Brown Silica Sand

White Silica Sand

Kaolin Clay & China Clay

Quartz Silica Sand

Fly ash is a finely divided residue made from the combustion of pulverized coal that can be used to increase concrete durability and workability, while reducing permeability. As fly ash contains aluminous and siliceous components, it may form cement when mixed with water if the calcium content of the fly ash is high enough. Similarly, mixing fly ash with lime and water can create a substance similar to Portland cement. Fly ash can be separated into two main types, known as: Class F Class F fly ash contains particles covered in a type of melted glass allowing it to reduce the risk of concrete expansion and increase resistance to sulfates and alkali-aggregate reactions. Class C Class C fly ash contains a higher percentage of calcium oxide, making it more effective in strengthening structural concrete. Applications & Benefits of Fly Ash: Fly ash is used in commercial and industrial sectors for improving the durability and workability of concrete mixes. Fly ash is also used as filler in paints, adhesives, and metal and plastic composites. It's commonly used as structural fill for road construction and fly ash can be used to make bricks, ceramic tiles, plaster, Portland cement, and ready-mix cement.

Microsilica (silica fume) is a by-product of silicon metal or ferrosilicon industries, is an amorphous silicon dioxide SiO2. This product reacts chemically with the calcium hydroxide in the cement paste which yields a calcium silicate hydrate gel that significantly enhances strength and durability. The super fine microsilica fills the voids between cement particles creating a very dense, less permeable concrete. Physical characteristics: Color: gray or gray white powder Bulk density: 320-700 kg/m3 Chemical composition: Items SiO2 Al2O3 Fe2O3 MgO CaO Na2O Moisture Content 75-98% 1.0-0.2% 0.9-0.3% 0.7-0.1% 0.3-0.1% 1.3-0.2% Fineness: the fineness of the silica fume is less than 1 1/4m, and the average particle size is 0.1 0.3 1/4m, and the specific surface area is 20 - 28 m2/g. The fineness and specific surface area are about 80-100 times of cement and 50-70 times of fly ash. Maxtech Micro Silica supplies will be as per QCS 2014 (ASTM C1240): SiO2: >/= 92% LOI:

GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.

Gypsum Powder

"Smokey Grey Quartz Lumps" likely refers to a type of quartz mineral that has a smoky gray or grayish-black coloration. Quartz is a common mineral found in various geological environments, and its color can vary based on impurities and the presence of certain elements. Smoky quartz gets its gray to blackish hue from the natural irradiation of aluminum-containing minerals within the quartz crystal structure. Quartz is a versatile mineral used in various industries and applications, including: Smoky quartz lumps can be used for decorative purposes in home decor, landscaping, and interior design. Quartz is a key ingredient in the production of glass, silicon, and various industrial materials due to its high resistance to heat and chemicals. High-purity quartz is used in the electronics industry for making quartz crystals and oscillators, which are essential components in electronic devices like watches, radios, and computers.

Quartz A grade refer to high-quality quartz that are of the highest grade and purity. This grade typically has a SiO2 content of 99.9% and above, making them suitable for use in industries where high purity is critical, such as in the production of high-quality optical lenses, semiconductors, and other electronics components. Quartz A grade has a particle size ranging from 1mm to 10mm, in the case of Lumps, depending on the specific application. They are carefully selected and processed to ensure that they meet strict quality standards, including low levels of impurities and uniform particle size distribution.

Potassium feldspar, also known as K-Feldspar, is a common type of feldspar mineral that is composed of potassium, aluminium, and silica. It is one of the most abundant minerals in the Earth's crust and is found in many types of rocks, including granite, gneiss, and pegmatite, that has a wide range of industrial and scientific applications. Its unique properties make it a valuable resource in a variety of fields, from manufacturing to geology. For example, it is a key ingredient in the manufacture of glass and ceramics, where it is used as a flux to lower the melting point of the materials. It is also used as filler in plastics, rubber, and other materials. We, SRS Minerals are equipped to supply Good quality K-Feldspar, with Potassium content up to 12% in Lumps from 1-300mm size, and in powder form, if required.

Quartz A grade refer to high-quality quartz that are of the highest grade and purity. This grade typically has a minimum SiO2 content of 99.60 - 99.99%, making them suitable for use in industries where high purity is critical, such as in the production of high-quality optical lenses, semiconductors, and other electronics components. Quartz A grade has a particle size ranging from 1mm to 10mm, in the case of Lumps, depending on the specific application. They are carefully selected and processed to ensure that they meet strict quality standards, including low levels of impurities and uniform particle size distribution.

Quartz chips of M grade are similar to quartz lumps of M grade in terms of their high purity and particle size. They also have a minimum SiO2 content of 99.95% and are considered to be of medium grade, with a particle size ranging from 1mm to 6mm. Quartz chips are commonly used in the manufacturing of high-quality glass, ceramics, and electronics components. They are also used in the construction industry as an additive to concrete and mortar to increase strength and durability. The M grade quartz chips are preferred in applications where a medium particle size is required. They are often used as a filler material in the production of refractory products, such as high-temperature insulation and linings