A member of kaolinite family, Ball Clay is renowned for its plasticity and green strength. They consists varying proportions of kaolinite, mica and quartz, with small amounts of organic matter and other minerals, and are commercially values because they increase the workability and strength of various ceramic bodies and have white or near white firing characteristics. Ball clay is processed to minimize the levels of coarse particles. This enhances better workability and higher strength.
Applications :
It forms a major part of many ceramic applications, including sanitary ware, tiles, table wares and to an increasing extent non-ceramic applications like functional fillers and advanced application for example technical ceramics.
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
China Clay is a clay mineral with the chemical composition AlSiO3O5(OH)3. It is layered silicate mineral. It is soft earthy, usually white in color, produced by the chemical weathering of Aluminium Silicate mineral like Feldspar. Commercial grades of China Clay are supplied and transported as dry powder form, semi dry noodle form or as slurry.
Applications:
- It is used in Cer/bamics for body & glazing of Tiles and Sanitary Wares.
- In paper it is used as filler. It is also used for paper coating purpose.
- It is used in paint also to extend Titanium Dioxide (TiO2) and modify gloss level.
- It is used in rubber to enhance reinforcement properties.
Commodity: Iron Ore Magnetite- 63.73% ++ Min Grade Fe
Origin: South Africa
Total Reserve: Over 30 million Metric tons
MOQ Quantity: 50,000MT Spot x 12 Months Roll Extension
Loading Port: COEGA Port. Port Elizabeth QHEBEGA. South Africa,
Port of Destination: TBA
Price: TBA
Delivery: Upon Contract Endorsements & Confirmation of Payment Guarantees.
Specifications:
Payment Terms: Irrevocable Transferable SBLCMT760 And Or DLCMT700, from the top 50
Prime Banks
To Proceed Kindly, Send Us as Follows:
1. An LOI+KYC/CIS from End Buyer.
2. And Or ICPO+POF+End Buyer Company Registration Certificate Passport.
3. Upon Acceptance, An FCO With Technical Details Shall be Tendered from Seller.
4. Draft SPA Negotiated And Endorsed for Engagement.
Commodity: Iron Ore Magnetite- 63.73% ++ Min Grade Fe
Origin: South Africa
Total Reserve: Over 30 million Metric tons
MOQ Quantity: 50,000MT Spot x 12 Months Roll Extension
Loading Port: COEGA Port. Port Elizabeth QHEBEGA. South Africa,
Port of Destination: TBA
Price: TBA
Delivery: Upon Contract Endorsements & Confirmation of Payment Guarantees.
Specifications:
Payment Terms: Irrevocable Transferable SBLCMT760 And Or DLCMT700, from the top 50
Prime Banks
To Proceed Kindly, Send Us as Follows:
1. An LOI+KYC/CIS from End Buyer.
2. And Or ICPO + POF + End Buyer Company Registration Certificate Passport.
3. Upon Acceptance, An FCO With Technical Details Shall be Tendered from Seller.
4. Draft SPA Negotiated And Endorsed for Engagement.
48739 Ores Minerals Suppliers
Short on time? Let Ores Minerals sellers contact you.
Hematite is an iron ore that contains iron in the form of Fe 2 O 3. It is a significant source of iron extraction. Hematite is a mineral that is paramagnetic. As a result, it can be drawn to an external magnetic field.
It is an iron oxide with a chemical composition of Fe 2 O 3. It is a common rock-forming mineral found in sedimentary, metamorphic, and igneous rocks at locations throughout the world. Hematite is the most important ore of iron.
Hematite is a heavy and usually hard oxide mineral that constitutes the most important iron ore123. It has a chemical formula Fe2O3, indicating that it consists of two iron (Fe) atoms bonded to three oxygen (O) atoms4. Hematite has a high iron content and is one of the most abundant iron ores found on Earth43. It is often found in sedimentary, metamorphic, and igneous rocks4. Hematite is mined in some of the largest mines in the world3. Hematite ore has naturally high iron content suitable for steelmaking5.
Features Of Iron Ore:
Iron ore is the main raw material that is used in the manufacturing of steel. 97% of the mined iron ore goes in the steel production. Nigeria has rich deposits of Iron Ore and is among the top 8 exporter of iron ore in the world.
Please find below our IRON ORE SPECIFICATIONS
1. HAEMATITE IRON ORE SITE 1
- Reserve Estimate : 26,553,534.835 Metric Tons
- Iron Content: 70%
- S.G: 4.05
2. HAEMATITE IRON ORE SITE 2
- Reserve Estimate : 29,433,844.835 Metric Tons
- Iron Content: 72%
- S.G: 4.2
3. MAGNETITE IRON ORE
Reserve Estimate : 243,838.14 Metric Tonnes
- Iron Content: 60.8%
- S.G: 5.0
Metal analysis of 6.885 Iron Ore
QUALITY TEST: Analysis was done using AAS & XRF-ANALYZER and the ELEMENTAL Compositions of the sample(s) are reported below:
CERTIFICATE OF ANALYSIS
SAMPLE ID IRON ORE SPECIFIC GRAVITY
(SG)
PARAMETERS Weight % 5.00
TiO2 0.746
Fe2O3 60.885
As2O4 <0.001
V2O5 0.417
NiO <0.001
MnO2 0.413
Cr2O3 0.195
PbO 0.656
Sb2O5 <0.001
CuO <0.001
SiO2 2.153
SnO2 <0.001
Bi2O3 <0.001
UO2 <0.001
HfO2 <0.001
ZrO2 0.059
ZnO 0.560
CoO 0.614
Ag2O <0.001
The key economic parameters for magnetite ore being economic are the crystallinity of the magnetite, the grade of the iron within the banded iron formation host rock, and the contaminant elements which exist within the magnetite concentrate. The size and strip ratio of most magnetite resources is irrelevant as a banded iron formation can be hundreds of meters thick, extend hundreds of kilometres along strike, and can easily come to more than three billion or more tonnes of contained ore.
The typical grade of iron at which a magnetite-bearing banded iron formation becomes economic is roughly 25% iron, which can generally yield a 33% to 40% recovery of magnetite by weight, to produce a concentrate grading in excess of 64% iron by weight. The typical magnetite iron-ore concentrate has less than 0.1% phosphorus, 3â??7% silica and less than 3% aluminium.
Currently magnetite iron ore is mined in Middle East,Australia& Canada Magnetite bearing banded iron formation is currently mined extensively in Brazil, which exports significant quantities to Asia, and there is a nascent and large magnetite iron-ore industry in Australia.
We can supply Iron ore from lower grade of 40% Fe to 65% Fe.
Magnetite is magnetic, and hence easily separated from the gangue minerals and capable of producing a high-grade concentrate with very low levels of impurities
The grain size of the magnetite and its degree of commingling with the silica groundmass determine the grind size to which the rock must be comminuted to enable efficient magnetic separation to provide a high purity magnetite concentrate. This determines the energy inputs required to run a milling operation.
Mining of banded iron formations involves coarse crushing and screening, followed by rough crushing and fine grinding to comminute the ore to the point where the crystallized magnetite and quartz are fine enough that the quartz is left behind when the resultant powder is passed under a magnetic separator.
Generally most magnetite banded iron formation deposits must be ground to between 32 and 45 micrometers in order to produce a low-silica magnetite concentrate. Magnetite concentrate grades are generally in excess of 70% iron by weight and usually are low phosphorus, low aluminium, low titanium and low silica and demand a premium price.
Due to the high density of hematite relative to associated silicate gangue, hematite beneficiation usually involves a combination of beneficiation techniques.
One method relies on passing the finely crushed ore over a slurry containing magnetite or other agent such as ferrosilicon which increases its density. When the density of the slurry is properly calibrated, the hematite will sink and the silicate mineral fragments will float and can be removed.
We can supply good quantities of Iron ore from India,Middle East and CIS countries.
Have stock about 40.000 ton +-10% Pyrite concentrate for factory sulphuric acid .content 40-48%Sulphur .Just interested only buyer factory sulphuric acid have capacity buy total stock. Delivery small quantity not is acceptable (not is profitable ) . Delivery only Fob Constantza Romania Europe .
Californium is a very strong neutron emitter. It is used in portable metal detectors, for identifying gold and silver ores, to identify water and oil layers in oil wells and to detect metal fatigue and stress in aeroplanes.
it is an actinide element, it is a silvery white radioactive metal with chemical symbol of CF
Our company powerstep.hk available on monthly basis
Big volumes of
-mill scale from steel plant
-electric ark furnace dust with about 22% zinc recovery
Origin Philippines
We are searching for a reliable buyer
In case of interest please contact us
