Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
Product description This product description is for 08 fiber single mode double armored optical fiber cable designed to meet the technical requirements as mentioned as per specification documents, it fulfills the design for the applications desired therein. The design is based on stranded loose tube which provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This cable is suitable for both duct and direct buried applications, it provides extra strength and rodent protection by using double armor and two inner coats. The stranded loose tubes contain thixotropic jelly for protection of the optical fibers as required. The thixotropic jelly protects the fibers within the loose tubes and provides excellent quality filling compound for stopping ingress/transport of water into the cable. The product is manufactured on itu-t g.652.D fiber. It facilitates easy and economical installation. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type v fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction parameters Fiber count as per customer¦s requirement No. Of loose tube to be designed to meet the specifications No. Of fiber in each tube to be designed to meet the specifications. Color of fibers as per tia/eia-598a Loose tube material polybutylene terephthalate (pbt) Loose tube filling material thixotropic jelly Central strength member fiber reinforced plastic (frp) v non metallic Core moisture protection methodology jelly filled construction Peripheral strength member glass yarn material medium density/high density polyethylene (mdpe/hdpe).
1U Fiber Optic Patch Panel
Providing solutions for edge computing, high-speed transmission and cloud storage. 1. SFP/SFP+/SFP28 DAC/AOC CABLE 2. QSFP+/QSFP28 DAC/AOC CABLE 3. QSFP DD Cable DAC 4. RJ45 CABLE 5. External MINI SAS HD 6. Mini SAS HD 7. Oculink 4X Cable 8. SlimLine 4X & 8X CABLE 9. U2 PCIe SSD Cable 10. SATA CABLE
Equipped with advanced testing equipment, the modern production lines built in the headquarters producing quality MPO and AOC fiber optic products.
Scitex XP2750 Sensor Fiber Optic AMP NPN RED LED - 25-4019 This Sensor Fiber Optic AMP NPN RED LED is suitable for HP Scitex XP2750 printers. This is the original HP part (number 25-4019). More Information Please Visit our website official store GAOLITOPRINTER, many best product Printers, Belts, Blades Pens andPad cutters, Boards,Bearings,Cappings, Cables, Connectors, Covers, Containers, Dampers, Electronics, Encoders, Fans, Fasteners, Filters, Fuses, Media Take Up Parts, Gears, Heaters, Holders, Lamps, Maintenance Kits, Mechanical Parts, Motors, O Rings, Power Supplies, Printheads, Pulleys , Pumps, Rollers, Sensors, Software, Tubes, Valves, Wipers
Scunoe is a professional fiber optical components manufacturer in China. which is offering a best quality range of Fiber Optic patch cord . Features: UPC?APC?Simplex / Duplex Types: SC FC ST LC MTRJ E2000 MU MPO etc Polishing : UPC , APC Single Mode , Multi Mode , OM3(10G) The dia of cable : 0.9mm, 2.0mm, 3.0mm Multiple option of Optic Cable Core,Simplex,Twin cores,4 Cores,6 Cores,12 Cores,24 Cores, 48 Cores Return Loss:=50dB(UPC/PC)=65dB(APC) Insertion Loss : Single mode:PC=0.3dB, UPC=0.2dB, APC=0.2dB, MTRJ=0.5dB; Multi-mode:PC=0.3dB, Repeatability:=0.2dB Frequency of Usage:=1000Times
SC APC SC UPC Dual Round Duplex 2.0mm Single Mode Fiber Optic Pigtail PVC Pigtails are used for splice applications when terminating outside plant cable. Its consists of a connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS requirements. All of OMC pigtails are factory inspected and tested, with available interferometer data upon request. OMCs pigtails are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type SM 1510nm PLC 1*16 Fiber Optical Splitter Micro TypeDescription: A fiber-optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar to a coaxial cable transmission system. SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Feature: 1. Low insertion loss 2. High return loss 3. Telcordia GR-1209 and GR-1221 compliance 4. YD/T 2000.1-2009 compliance SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Application: 1. FTTx, FTTH,FTTF,FTTB, 2. PON networks, BPON, EPON, GPON 3. CATV, CCTV 4. Data communication SM 1510nm PLC 1*16 Fiber Optical Splitter Micro Type Product Specification: Line Width: 20mm Wavelength: 650nm Optical Path: Inner Optical System Operation Material: Solid State Incentive mode: Light pump type Opticombine was founded in 2011, owned by SI CHUAN GUANGFA TECHNOLOGY CO., LTD. Opticombine is a manufacturer and full-line distributor of communication fiber opticï¼?connectors, fiber optic consumable products, active & passive network equipment and components. It serves customers from all segments of the fiber optics industry including telecommunications, contractors, resellers/distributors, researchers, government, education, cable TV operations, and telephone R&D facilities. We're committed to delivering an exceptional customer experience by consistently applying the principles of trust, partnership, expertise, and a proven reputation knowing that our employees are the key to our success.CC:
Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70â?? - RoHS compliant Applications - 25G Ethernet
Please quote for the following wholesale product requirement - Product Name: Optical Fiber Cables Specifications: Type: Optical Fiber (POF), Transparent Glass Or Plastic Fibers Voltage: Low & Medium Material: Plastic Fiber, Rubber Use: Industrial, Construction Size: Customized Packaging Terms : Standard
Fiber Optic cable assemblies single mode and multimode.
Product Applications - Manhole, Aerial and directly buried - Fiber optic distribution points - Building and campus network applications Product Benefits - Easy Montage with self-locked cassette system - High quality, water proof, reusable -Comply with SM and ribbon cable splicing - 8 cable port for GPON and FTTx applications - Easy usage in smallest manholes with special desing - Jamming-skid, silicone splice sleeve housing - Easy fiber control in cassettes when using of multi buffers
This product can also be used to multiplex other wavelengths. including 980/1030 nm (pulsed laser applications) and 1064/1550 nm (Erbium-Ytterbium pumping). Low power (300 mW, 500 mW) and high power (20W) handling are available.They are ideal for polarization maintaining fiber amplifiers, fiber lasers, and high speed communication system and instrumentation applications.
Faraday rotators change the polarization state of light traveling through it.
Ruik's polarization maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output, while blocking the reversed direction. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Mode Field Adapters (MFA) can be used for high power fiber lasers and fiber amplifiers. These devices can be used to connect two fibers with different core diameters and numerical apertures (NA). RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's polarization maintaining optical isolator is a device, which allows the light to transmit through the passive route from input to output, while blocking the reversed direction. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
