The ir pass filter (infrared pass filters) that operates over a very wide temperature range to reflect the entire visible light spectrum while very efficiently transmitting infrared wavelengths. So that can increase the temperature of bathroom.
Conversion color temperature filters
1) HDMI to HDMI 2) Metal Shell 3)100% Triple Shield 4)Oxygen Free Copper Conductor 5)24K Gold Plated 6)Support 1080p OPP BAG
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Applications: 10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm Working frequency: 1-100mhz Technical parameters: Characteristic impedance: 100ía15ª+ Nominal velocity of propagation(nvp): 69% Maximum dc resistance: 9.38ª+/100m Maximum mutual capacitance: 5.6 nf/100m Maximum capacitance unbalance: 330 pf/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30 ns/100m Maximum propagation delay: 536 ns/100m 100 mhz Minimum bending radius: 10 x overall diameter Voltage rating: 60v rms Maximum pulling load: 80n Working temperature: -20 íµ ~ +60íµ Storage temperature: -5íµ ~ + 50íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc & lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket) Product highlights: Provide excellent bandwidth beyond 100 mhz. Designed for use in data and voice backbone application. Meet the strict flame retardancy and environmental requirements in europe and us. Easily identifiable color code for ease of installation. Transmission properties: Freq: 100 (mhz) Roll, box, drum
Optic fiber adapter - LC are all plastic housing; There are simplex LC adapter and duplex LC adapter, usually duplex LC fiber adapter are with SC footprint. The LC fiber adapter colors are same as SC fiber optic adapter: Blue for single mode PC, beige for multi mode PC and green for single mode APC. LC fiber optic adapter are with bronze sleeve for multimode and zircon sleeve for single mode. Features: 1. Standard metal one-piece body, good interchangeability 2. Precision ceramic sleeve, low insertion loss 1. Applicable standard: YD/T826, YD/T896, IEC61754-13 Applications: 1. Optical fiber communication networks 2. Optical CATV 3. Instruments and meters
Fiber optic Patchcord - LC is a small scaleization, demand but development that high thickness joins one kind of new connection box in order to meet client. It compresses in the entire electric network plank and room that wall plank and the flexibility cabinet needs, causes such the person who possess room merely considerably traditional ST and SC connection box in part. Intelligently the bright and beautiful corporation adopts well-developed technique and installation, and carrying on scale manufacture, the produce performance is good, and the quality is steady dependable. Distinguishing feature 1. The bulk is little, the dimensions accuracy is high 2.1.25mm the ceramics is trusted the rush pith 3. The insertion loss lets drop 4. Echo return loss is high 5. Two kinds of compositions in the single rush pith and twin rushes pith may feed the selection 6. Accord with IE874's criterion Application 1. Telecommunications and data news dispatch 2. Local area network (LAN) 3. Vast domain net (WAN) 4. Installation terminal end
Fc fiber patch cord We provide st optical fiber patch cord, fc fiber optical patch cord, sc optical fiber patch cord, fddi fiber optical patch cords, escon optical fiber patch cords, lc fiber optical patch cord, mtrj fiber optic patch cord, and mu optical fiber patch cord. They are according to the ultra-polished (upc), angle-polished (apc) or other polish requirements. Pc, upc or apc polishing Single mode fiber: itu - t g. 652 b/d Multi mode fiber: itu - t g. 651 Standard: telcordia gr-326-core Standard housing, ceramic ferrule Fiber cable diameter: 2.0mm or 3.0mm or 0.9mm Fiber diameter: 9/125m, 62.5/125m or 50/125m or 10g Simplex, duplex, multi-bundle fiber or customized optional Insertion loss: (sm)pc 0.3 db, upc 0.2 db apc 0.2 db (mm) pc0.3db Return loss: sm (pc) 50db(upc) 60db mm 35db Mechanical endurance(1000t): 0.2db Exchangeability: 0.2db Vibration: 0.2db Operating temperature: -40c~+80c Storage temperature: -45c~+85c 2. Features Realized the active link of optical fiber transmission Low insertion loss and high reture loss Excellent repeatability and interchangeability 3. Application Catv Lan, access network Telecom, gigabit data network Testing and medical equipment Industry and military application
Mfoc íªs sm and mm attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, e/o converters and for testing the linearity or dynamic range of optical power meters.
Insertion loss (dB) í- 0.2 Return loss(dB) UPCí+ APC50 í+ MM/PC60 í+ 35 Repeatability (dB) í- 0.1 Oprerating temperature (¿¼ C) -20-+60 Storage temperature (¿¼ C) -40-+85 Interchangeability (dB) í- 0.2
Pc, upc, apc multi skive project High return loss Low insertion loss High reliability and stability Available for both sm, mm, simplex and duplex 0.9mm, 2.0mm, 3.0mm cable diameter option
Pc, upc, apc multi skive project High return loss Low insertion loss High reliability and stability Available for both sm, mm, simplex and duplex 0.9mm, 2.0mm, 3.0mm cable diameter option
Optic cable
Cable ties
1> Long distance and local light transmission network 2> Data Transmission network, various kinds of testing and self-control system 3> Realizes connection of transmission of fiber optical 4> Simplex and duplex patch cords available 5> multimode and singlemode optional 6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um 7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional 8> made by advanced ceramic sleeve 9> PC, UPC, APC polishing cartons
1> Long distance and local light transmission network 2> Data Transmission network, various kinds of testing and self-control system 3> Realizes connection of transmission of fiber optical 4> Simplex and duplex patch cords available 5> multimode and singlemode optional 6> Single mode fiber :8/125,8.3/125,8.7/125,9/125 um Multimode fiber :50/125 ,62.5/125 um 7> Connector: ST/SC/FC/LC/DIN/MTRJ/ D4/MU/E2000/SMA optional 8> made by advanced ceramic sleeve 9> PC, UPC, APC polishing
Optical fiber couplers 1. Input / output connector: fc/pc; fc/apc; lc/pc; mu/pc; sc/pc; sc/apc 2. Fiber length: 1: 1 m; 1.5: 1.5 m (customized) 3. Fiber type: 2: bare fiber, 9: 0.9mm loose tube, 3.0: 3.0mm cable 4. Coupling ratio: 01: 1: 99, 02: 2: 98, 50: 50: 50 5. Central wavelength: 13: 1310nm, 15: 1550nm 6. Port: 12: 1*2, 22: 2*2 7. Grade: p or a.
Fiber optic splice closure gl09-5 Gl09-5 fiber optic closure is horizontal with three inlet and three outlet(six ports).The outer shell is made of enhanced pc engineering plastic, its strong and light, can efficaciously prevent the lighting strikeóerosionóaging and fire resist, the tray is pulldown, so its easy installation, dont need dismantle other tray, the material of the sealing is silica gel, it can repeatable operation. The scope of application : erial, direct-buried, wall-mounting, duct-mounting, The application of temperature :-4065 8 pieces / carton
The product includes: optical fiber, loose tube, fiber compound, cable core, strengthened steel wire, water blocking tape, steel-composite belt, sheath with Kevlar. Characteristics of technic: damp proof, Aerial ground Characteristics of the product: Optical fiber coating loose tube, fill in fiber compound, Strengthened steel wire in the middle, tube gasket around steel wire as SE intertwist, cable fiber fill in cable core, and then coating water blocking tape, double-faced PE outer jacket Best SE interwist product optical fiber away from drawing and press. Ensure the machine of optical fiber, environment function adapt damp-dry waterblocking fiber, dependable waterproof function, avoid shift, high camber, damp proof, high bulletproof.
