Sophenol singlemode 9/125m fiber patch cable using impotred high technical polishing machines for low-less connections,and all cables are 100% optically tested for insertion loss. Item Details: Connector: LC to LC Jacket OD: standard 2.0/0.9/3.0mm Fiber Mode: 9/125m Jacket Color: Yellow Fiber Type: Duplex Jacket Material: PVC/LSZH/OFNP Applications: Date centre Telecommunication networks CATV LAN and WAN FTTX Broadband network EACH CABLE PACKED IN A ZIP-LOCK POLYBAG HOT-SEALED POLYBAG, TEST DATA KEEP IN BAG
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE)sheath. Good mechianical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber PSP enhancing moisture proof Two parallel steel wires ensure tensile strength Small diameter, light weight and friendly installation Long delivery length
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene(PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, which is filled with the filling compound to protect it from water ingress. The cable is completed with a PE sheath. Characteristics Good mechanical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber Specially designed compact structure is good at preventing loose tubes from shrinking Crush resistance and flexibility PE sheath protects cable from ultraviolet radiation The following measures are taken to ensure the cable watertight: Steel wire used as the central strength member Loose tube filling compound 100%cable core filling PSP enhancing moisture-proof
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene(PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate(APL)is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath. Characteristics Good mechanical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber Specially desighed compact struture is good at preventing loose tubes from shrinking PE sheath protects cable from ultraviolet radiation The following measures are taken to ensure the cable watertight Steel wire used as the central strength member Loose tube filling compound 100%cable core filling APL moisture barrier
Splicing time:8 seconds Applicable fiber:sm mm ds nzds Alignment:core to core Heating time:25 seconds Equal to:fujikura fsm-70s Electrode life:4000 Standard carton or according to customer's requirements
Fiber properties: 1.International standard SMA-905 connector Quick and convenient connection with SMA-905 international standard interface. 2.Good quality, reasonable price Medfibers provides laser optical fiber transmission products for famous medical laser manufacturers all over the world. 3.Professional sterilized package Our fibers go through strict sterilization steps. It can be used directly. 4.Applicable to a variety of wavelengths Our fibers can transmit 810nm, 940nm, 980nm, 1064nm, 1470nm, 1900nm, 2100nm and other more. Our fiber is hard to break and wears a firm coating to protect from breaking when using.
Splice Closure The OPGW splice box is mainly used to protect the fiber optic connector between two cables and reserve a section of fiber optic inside the box for maintenance. The junction box has good sealing, waterproof and moisture-proof, and will not corrode in the power line. Usage: Suitable for OPGW cable connection protection, has the function for direct connections and divergence connection, which can out of 4 cable, installed in the overhead pole, tower. Structural features a. OPGW splice box using aluminum alloy shell, resist-corrosion, high mechanical strength. b. OPGW splice boxseals with seal ring and silicone, simple operation, open repeatedly, easy maintenance. c. can make OPGW splice box connect ground according to the requirements ,equipped with the special fixture of towers and pole.
5000M 48 Core fiber optic cable ADSS G652D 100M SPAN SINGLE PE JACKET
Main technical parameters : * Optical fiber external diameter: 0.9mm, 2.0mm, 3.0mm are optional, and PC, UPC and APC are available, there are two kinds of single mode and multi-mode. * Insertion loss: 0.2dB * Echo Loss: PC 40dB,UPC 50dB,APC 60dB * Exchangeability test: 0.2dB * Vibration test: 0.1dB (10-60Hz, 1.5mm amplitude) * Tensile strength test: 0.1dB (0-15Hg tension, excluding 0.9mm optical fiber) * High temperature test: 0.2dB (+85 C, lasting 100 hours) * Low temperature test: 0.2dB (-40 C, lasting 100 hours) * Temperature cycling test: 0.2dB (-40 ~85 C, after 5 cycles) * Humidity test: 0.2dB (+25~+65, relative humidity 93%, 100 hours later) * Commonly used connectors: SC (large head)/LC (small head/FC (spiral port)/ST (card port) Scope of application : * Optical Fiber Communication System, Optical Fiber Access Network, Optical Fiber Data Transmission, Optical Fiber CATV, Local Area Network (LAN), Testing Equipment production of optical fiber cable : FTTH Optical Fiber to Home, Trunk to Home, FTTH Distribution Box, Corridor Box, Optical Splitter Box, Optical Fiber Stripping Clamp, Tail Fiber, Jump Line, Optical Fiber Adapter, Coupler, Fused Fiber Disk, Optical Fiber Panel, ODF Box, Adapter, Optical Fiber Flange, Optical Fiber Coupler, Optical Fiber Desktop Box, Optical Fiber Cold Connector, Optical Fiber Fast Connector, ODF Unit Box, Integrated Module, Optical Fiber Fused Fiber Communications products such as pipes, wiring frames, indoor and outdoor junction boxes, cabinets, etc. Specification parameter : Jacket material LSZH,PVC,OFRN,ORNP Fiber type SingleMode 9/125 Inserion Loss 60db Certification ROHS; ISO Length Customized Plug in and out 500 times Storage temperature -50 ~85
PASSION ED binoculars are built to the highest standards within their price class, and in the same factories as other European brands. Their unique magnesium body makes them ultra lightweight yet incredibly durable, and their cutting edge field of view makes these binoculars an instant classic among outdoor enthusiasts. Back up these features with GPO, USAâ??s Spectacular Lifetime Warranty and you have a binocular that will stay in your family for generations.
This product is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on. It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. Can effectively prevent the optic fibers from the influence of outdoor environment.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources. Optical line protection switch provides both Manual and Automatic switching mode. In Manual mode, the system switches optical path only based on the commands from user. In the Automatic mode, the system switches based on the power level detected and the preset threshold. Under automatic mode, the system can be set to be revertive or Non-revertive modes. Under Revertive mode, the system switches back to the working path automatically after the fault condition is cleared. Under Non-revertive mode, the system does not switch back.The OLP models fit HT6000 Series CH04, CH08, CH20 Chassis.
CAT6/CAT6A U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded 1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated, 2. Unshielded twisted Cable, 4*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor, (CCA available as well). 3, Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801, 4. Connect way: 1: 1 or Crossover for option, 5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test 6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD, 7. UL or cUL Listed, compliant with CMX, CM, CMR 8. Have full series popular Strain relief Mould for Choice,
Optic fiber cable specifications 1. Up to 144 fibers 2. Light weight, less additional load to tower. The maximum span can reach 1500m. 3. Strong anti-pull performance, more than 90KN. 4. Non metallic structure provides good insulation, excellent lightning resistant. 5. Equal distribution of aramid yarns with good production process, excellent stress/strain performance. 6. Excellent bullet resistant performance 7. Excellent tracking resistant performance. 8. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault
Can be installed without shutting off the power Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large Span lengths and the largest span is over 1000m Accurate control on Aramid application greatly improving the strength of cables Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature The design life span is over 30 years ADSS cable structure ADSS cable is the short form for All-dielectric Self-supporting Optical Cable. ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound. The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core. After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member, ADSS optical fiber cable is completed with PE or AT outer sheath.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. Can we use OLP in single fiber solution In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources.
Features Splicing cycle time: 6 sec. Heating cycle time: 15 sec. Automatic fiber identification (SMF, MMF, DSF, NZDSF, BIF, other). Long-life battery for 300 splice&heat cycles. Automatic arc calibration. Dust-resistant, water-resistant and shock-proof. Compact & lightweight (only 1.7 kg). Touch-screen operation. Upgrades software via web. Remote interactive maintenance via web. Equipped with onboard user training video.
32 ports EDFA with WDM: JDSU pump laser with Double Power Supply
Optical adapters are the most commonly used optical passive components in optical fiber communication systems. Most optical adapters are made up of three parts: two optical connectors and a coupler. The two fiber optic connectors fit into two fiber ends; the coupler acts as a bushing. In addition, the coupler usually match with metal or non-metallic flange, in order to facilitate installing and fixing the connector. Quick Details: Place of Origin: Shenzhen, China (Mainland) Brand Name: Optico; Model Number: SC/APC SM Adapter SX; Product name: SC/APC fiber optic adapter; Application: Telecommunication; Type: Simplex, Single mode; Material: Plastic; Certification: ISO9001; Wavelength: 1310nm/1490nm/1550nm; MOQ: 200 pcs;
FTTH Fiber Optic Patch Panel with SC/APC connector & adapter, 30M cable length Quick Details of FTTH Patch Panel: Place of Origin: Shenzhen, China (Mainland) Brand Name: OPTICO Model Number: FTTH Patch Panel material: ABS adaptor: SC external dimension: L86xW86xD27mm mode: SM&MM standard: Telecom Standard stye: FTTH mini terminal box Port: 2 port pakcing: 1 set/OPP bag, suitable quantity per carton box; delivery: 7~12 days. Payment Terms: T/T, West Union, L/C; 30% deposit, 70% balance; Price Terms: FOB Shenzhen 2.5~3.5USD/set;(with SC/APC connector&adapter, 30m cable length) Application of FTTH Patch Panel: A user end product to realize optical fiber to desktop solution; It can be used in home or working area to accomplish double-core fiber access and port output; Used in the end termination of residential buildings and villas, to fix and splice with pigtails; Used in FTTH indoor application, home or work area; Provide users with optical access or data access; Suitable for 2 pcs SC adapters; May store surplus fiber inside, easy for operation;
