Find Verified Metal Watch Straps Suppliers, Manufacturers and Wholesalers

Carbon anode, carbon cathode, carbon cathode powder, used refractory bricks, refractory castable aluminum ingot, aluminium sows.Manufacturer

Antibacterial wet wipes, mobile chargers, mobile usb cable, paper cup, roasted coffee beans, espresso, steel coils, razor, belts, sesame seeds, face shield, tapioca starch, tapioca chips, aluminum ingots, zinc ingots, samsung usb chargers, iphone charger, silica sand, basil leaves, onion.

Detergent, food, beauty and health care, building material, ceramics, stone.

Metal Scrap

HBI is the preferred DRI product for the merchant metallic market; Because it is much denser than CDRI, which reduces the re-oxidation rate. In fact this enables HBI to be stored and transported without special precautions under the International Maritime Organization (IMO) code for shipping solid bulk cargoes. Besides we can use it the EAF, BF, and BOF. Consequently, HBI which is the product of compressing DRI discharged from the MIDRE Shaft Furnace at 650 C into pillow-shaped briquettes; with a typical size of 30 x 50 x 110 mm and a density 5 gm/cc. No binder is used to make HBI.

Steel Billet, also called bar stock, is technically a semi-finished casting product that needs further processing before becoming a finished material. Actually, since billet is grained in its structure as a metal it processes very intricately. Steel Billet is, in fact, a length of metal with a square or round cross-section. It is used in general and structural purposes. Pipes and wires are 2 of the main products made with billets. Billets are also used as raw materials or feedstock in forging, rolling and other metal-processing operations. The range of semi-finished products above 155 mm x 155 mm is called blooms. Blooms have rectangular cross-sections. The name Bloom comes from Bloomery. Another condition for a bloom is that the cross-section must be greater than 36 sq. inches. We in Arij supply high-quality Cast Square Billets of varied lengths and cross-sections. However, standards for steel billets vary and each must feature the chemical composition necessary for producing the desired product. We provide international specifications including BS, ASTM, EN, etc. or any other tailor-made requirements of our clients. different grades: 5Sp 3sp different cross sections: 150*150 mm 130*130 mm 125*125 mm

The rapid expansion of high-power EAFs (Electric Arc Furnace) has increased the interest to use DRI as a great option for the continuous charging of electric furnaces in developed countries. Sponge iron is a valuable source of iron for the production of high-quality steel. With the Direct Reduction technology that has been developed considerably in recent years, sponge iron melting in electric arc furnaces has more qualitative advantages than scrap metal smelting for steel making. Some of the benefits include: More specific chemical composition Low levels of impurities (gangue, sulfur, and phosphate) The impossibility of using cheap scrap Easy storage and shipment Continuous automatic charging Predictable price structure Fixed power of input electricity Relying on the knowledge, valuable experience and history, and empowerment of our team, we, Arij Global Trading Co. are supplying our high-quality gas-based DRI to the far destinations in containerized and bulk shipment. As a supplier of gas-based Sponge Iron with a great history and experience, we also provide cost-effective solutions for the shipment to our customers in complete accordance with their needs, which ultimately fulfills the goal of providing satisfying service.

In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel. Most of the steel mills production complies with the Russian standard which is divided into three types of A-1, A-2 and A-3 steel. The A-1 grade is of a flat type. The yield strength and tensile strength (rupture stress) are 2400 and 3600 kg / cm2, respectively. The A-2 grade is of an indented bar type with the yield strength of 3400 and a tensile strength of 5000 kg/cm2. The A-3 grade is also of an indented bar type with a yield tolerance of 4000 and a tensile strength of 6000 kg/cm2. Arij Global Trading, with years of experience in supplying steel products, supplies the best quality of Rebar according to the world standard properties.

Wire Rod is used in the industry in two types of indented and plain with the size of 5.5 mm to 16 mm. Wire Rod is manufactured in the factories up to the size of 12 mm, and the higher sizes are produced according to the order. Also, the indented wire rod is divided into two categories of A2 and A3. Wire Rod is used for different products and is the raw material for the wire drawing units, fasteners, automobile components, and hardware manufacturers. With a successful history of supplying and exporting steel products, we have effectively positioned Arij Global Trading to meet the various requirements of our clients in different countries with the highest standards of quality of Wire Rod.

Because of the bright future of the universal requirement for DRI briquette over the next two decades, a new method was created in 2009 in Iran to produce a cold briquette of CDRI (Patent No. IR60923). Cold-Briquetted Sponge Iron (CBSI) was the name given to the new product. Afterward, following pilot-scale and performing various laboratory studies, Cold-Briquetted Iron and Carbon (CBIC) was invented in Iran as a premium product over CBSI because of the prior�¢??s higher carbon content sand higher efficiency through processes of steelmaking (Patent No. IR84090). Owing to the fact that the cold-briquetting process of DRI is being done under high pressures, the density and mechanical strength of CBIC should be higher and the surface area and also porosity should be less than DRI�¢??s. thus, the oxidation rate, dust and fine generation rate, and the moisture adsorption capacity of DRI will considerably decrease through the process of cold briquetting. These improvements would have big technical, economic and environmental effects on direct reduction and industries steel manufacturing and will push them heading for more sustainability

Sponge iron, dri, direct reduced iron, hbi, hot briquetted iron, cold briquetted iron, cement, clinker, garnet, blast furnace slag, bentonite, dolomite, limestone, quicklime, quick dolomite, bitumen.

the transformation in the Iron and Steel industry made a knock-on effect on the dolomite market. This, in turn, increased the demands for Dolomite from various industries. Arij as a competent Dolomite supplier has the honor to supply high-quality Dolomite both in raw and powdered forms. Industrial applications of dolomite are as follows: Iron and Steel Industry Paint and Lacquer Industry Building Materials manufacturing (Cement, Shimot Brick, etc.) Glass and crystal Manufacturing Water Refinery Metal Melting Industry Ceramics and Tiles Manufacturing Agriculture and livestock (PH control, Fertilizer, etc.) Environmental Pollution control Medicinal purposes Arij offers the top grade of whiteness and brightness highly adapted for your different requirements. All you have to do is place an order and our expert team would offer every technicality promptly according to your order requirement. The specific consultancy of your requested material includes The suitable specification-grade, purity, density, color, a form of the product, type of packaging, etc.

HMS 1, metal scrap.

We can provide the armature iron needed by customers in any amount, FOB delivery to Bandar Abbas, Iran

2000 MT granular Sulphur in a Jumbo bag and or bulk is available, please get in touch with us if a serious buyer.

Metal scraps.