Application As composed of three-stage precise filtering, this machine is an ideal substitute of the board-frame oil purifier and the centrifugal oil purifier. It is also can serve as precise filtering and oiling. Advantage This oil purifier is equipped with three-stage purification, portable, easy to operate, very low price, no need of purification paper, no contamination to the ground. The product can effectively purify the tiny and fine mechanical impurity min oil, enabling it to be a prior choice of power industry, petroleum, chemical, metallurgy, mechanics and railway for oil filling, oil drawing and high precision impurity removal of mutual inductor, lathe, and oil breaker which do not use large quantity of oil.
DVTP Double Stages High Vacuum Transformer Oil Filter Machine has a high pumping rate of two-stage vacuum system, a unique degassing, dehydrating function, using the most advanced three-dimensional double-flash technology, fast and efficient removal of oil in liquid water, while double precision multistage comb filter can efficiently remove oil in the water, gas, particulate impurities, acidic substances and oil oxidation products, thus improving the dielectric strength of the transformer oil, to reduce the acid value of the oil and dielectric loss, to ensure the safe operation of oil-filled electrical equipment. DVTP Double Stages High Vacuum Transformer Oil Filter Machine is mainly composed of inlet valves, strainers, heater, solenoid valves, vacuum tank, low vacuum degassing member, high vacuum degassing member, low condenser vacuum, high vacuum condenser, vacuum pump, roots pump, filling the vacuum solenoid valves, rotary vane vacuum pumps, circulating cooling water pumps, water tanks, floating ball valve, exhaust pump, check valve, a fine filter, two fine filter, oil electric control valve system components.
VTP Vacuum Transformer Oil Filtration Treatment Machine can satisfy the installation or maintenance field of transformer for pumping air into vacuum state, and at the same time complete the transformer oil degassing, dehydration processing, shorten the oil processing period. VTP Vacuum Transformer Oil Filtration Treatment Machine combines oil precision filtering, high efficiency of dewatering, degassing, vacuum stereo evaporation technology and automation control technology at an organic whole, the operation is simple, safe and reliable. Features: 1.High filtration precision holds much of sludge, remove the fine particulates out from the oil. 2.Unique degassing, dehydrated material, its evaporation area one hundred times larger than conventional materials. 3.The Transformer Oil Filtration Treatment Machine has the characteristics of small dimension and high efficiency, convenient movement, particularly suitable for live working in site. 4.The vacuum Transformer Oil Filtration Treatment Machine use the advanced fuzzy oil temperature control system , the oil temperature upper and lower bounds can be arbitrary set , make the oil temperature to be interval control. 5. The vacuum Transformer Oil Filtration Treatment Machine adopts high automatic degree and the oil temperature level to realize automatic control and automatic protection, safe and reliable, simple operation and convenient.
We has developed DST Insulating Oil Dielectric Strength Tester according to International standard IEC156, which is developed especially for measurement of insulating oil breakdown voltage. The dielectric breakdown is an indication of the oil ability to withstand electrical stress. The oil sample is placed in a test cup and an AC voltage is impressed on it. The electrodes are two discs, exactly 1 in. in diameter and placed 0.10 in. apart. The voltage is raised at a constant rate, until an arc jumps through the oil between the two electrodes. The voltage at which the arc occurs is considered the dielectric strength of the oil. DST automatic Insulating Oil Dielectric Strength Tester is unique in the market due to its functionality and the excellent user benefit in comparison to costs. The transformer oil tester provides delivers clear and reliable measurement results. It is no longer necessary to send samples to the laboratory. Environmental and transport influence on the samples are minimized. Due to its design, the tester is particularly handy, easy to operate and especially excellent to use under tough ambient conditions. By proper programming, DST Insulating Oil Dielectric Strength Tester has got functions of auto boosting, step down, stirring, display and print out. Portable type is available for performing both levels of this test in the field.
Sino-NSH-VFD is a dehydration and degassing unit with thermal and double-stage vacuum processing. Sino-NSH-VFD is mainly used to improve the properties of insulation oil in electric power transformer and other oil filled electrical equipment. It can remove dissolved and free water, dissolved gas and particulate impurities effectively so as to increase special indexes of insulation oil. Sino-NSH-VFD combines vacuum flashing evaporation technology and laminating gradual-close filter technology to reach best performance of oil purification. Meanwhile, by integrating efficient thermal and double-stage vacuum, the breakdown voltage is high improved, which can be increased from 25kv to over 70kv. Sino-NSH-VFD maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
OIL INDUSTRY WE ARE DIRECT SELLERS SPARE PARTS. ORIGINAL INDUSTRIAL EQUIPMENT INDUSTRIAL SUPPLY
SINO-NSH Vacuum Lubrication Oil Purifier LV series is particularly suitable for purifying turbine lubricating oil. It also applies to treat hydraulic, coolant oil and other lubrication in which contain large amount of water and others such as vapor, impurities, sludge, dielectric and colloid. NSH-LV series will result in the improvement of the properties of turbine oil or other lubrication and extend the maintenance period of turbines or other equipment which have lubrication system and keep them operate in good condition.
Even carrying through regular maintenance carefully installation and operation, the insulation oil may also be contaminated. The electrical equipment would fall in troubles as the declining of the oil�¢??s insulation trait. The expenses and time spend in maintenance of the electrical equipment would far more than that of the insulated oil. The use of Vacuum Transformer Oil Purification and Regeneration Plant is necessary, which will help you maintain optimal oil cleanliness. VFD-R series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters, and remove colloid, pitches and sludge etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system.
NSH VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, cable and capacitors which has insulation system. VFD series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil.
Sino-NSH-DPCS is an oil filtration and lubricating station with dual system to ensure continuous operation. It is widely used for lubricating the blower, besides it can be used as lubricant for the machine with similar function as blower or motor. It uses for supplying lubricant to blower, motor or other mechanic equipment which will reduce the attrition and make the equipment cool, so then the equipment can run continuously.
Sino-NSH-LF oil flushing system is used to remove harmful contaminants for a large oil system, such as hydraulic control systems, rotating equipment lubrication system, and turbine/generator unit, etc. It will keeps the equipment operating at peak performance and reducing the potential for failure. NSH oil flushing system adopts American advanced fast flushing the system, It not only can purify particles, fibers, clay, or even water and a variety of pollutants in the oil, but also a large number of oil need for rapid purification of the occasion. LF series has high efficiency, low cost, easy operation, safety and reliability.
Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxide from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standards and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns to liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emissions gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH-GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by the system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.
Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery's lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas, etc. Chemical processing method allows removal of colloid, oxide, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.
Sino-NSH-PF is a portable multi-stages high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.
Sino-NSH-LV is a dehydration and degassing unit with thermal and vacuum processing. It is a multifunctional purifier which can treat various kinds of lubricant oils. Sino-NSH-LV is mainly used to remove dissolved and free water, and particulate impurities effectively so as to increase special index of lubricant oil. Combining with vacuum system, the multi-stage filtration system adopts a high dehydration efficiency . It has a strong anti-emulsifying capability, which could separate the large amount of water from oil and the trance water from oil. The clearness of final oil can be under 6 NAS and water can be under 100 PPM after processing with our machine. Sino-NSH-LV maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
Sino-NSH-TC is a complete oil purification system integrating vacuum oil purifier and centrifugal separator, widely used for the filtration and purification of turbine oil, as well as other lubrication oil. Sino-NSH-TC adopts vacuum and centrifugal technology, designed to meet the device needs of customers. It can effectively remove free water, dissolved water as emulsified water, reduce the water content to less than 100 PPM. Also remove the particulate contamination from oil with high precision centrifugal separator. centrifugal separator is able to remove 99.995% of solid contaminants and 99.4% of water. Various capacities are available for this system, and some optional device such as PLC Control system, Container structure,etc.
Sino-NSH-TF-Z is a dehydration and filtration unit, especially suits for purification of turbine oil and fuel,etc. Sino-NSH-TF-Z combines the latest innovations in coalescence separation technology and micro-glass filter media in one system to achieve optional fluid cleanliness. With specially designed filter elements, it can efficiently separate water from oil quick, break the emulsification, as well as remove particulate pollutants. After separation, the water content can be reduced to less than 100 PPM, and the cleanliness can reach or better than NAS 4-6 Grade. Sino-NSH-TF-Z can effectively save operating cost as no heating or vacuum is required, and it is designed for continuous operating and unattended operation.
Sino-NSH-TF-A is fully automatic unit developed based on NSH-TF, realize the intelligence of the machine and simplify the operation. Sino-NSH-TF-A utilizes the brand programmable logic control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided are required. Several Pilot Lights are provided to indicate operations status of key components and alarm conditions. With full scale of on-line testers and detectors as option, Sion-NSH -TF-A could implement accessible and reliable solutions for unique request and practical usage.
Sion-NSH-TF-E is explosion-proof type designed for flammable and combustible working conditions in power plant, petroleum, chemistry, coal mining, metallurgy and other industries. Sion-NSH-TF-E adds an explosion-proof system compare to NSH-TF, using comprehensive explosion-proof technology. The components such as heating system, electric control system, motor and solenoid valves etc are well-selected explosion-proof type adapt to different danger lever.
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties. Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade. TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
