Electric Power Supply Components Suppliers and Manufacturers

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 150KW Rated energy: 225KWH

Transmission lines are the connectors running between generating stations and distribution stations. Transmission lines carry high voltages from the generating stations to primary transmission stations, secondary transmission stations, primary distribution stations, and secondary distribution stations

Mfrs of Led Driver Led Controller SMPS Power Supplies for CCTV Camera Security Systems Switching Power Supplie Battery Charger DCDC Converter Transformer Medical Power Supply Switching AdaptorsSolar Products E Bike Charger Lithium Charger Car Inverter UPS & Inverter Cvt

1, Input: 100 to 240V AC, 50/60Hz 2, Output power: 24W series 3, Output voltage: 3 to 24V DC 4, Output current: 10 to 4,000mA 5, Overload protection 6, Output over voltage protection 7, Short circuit protection 8, High efficiency Mini 75 % 9, DC socket (optional) 10, CEC power supply standard 11, CE approved 12, No Load Power Consumption ¡Ü 0.3 W at Rated Voltage 13, Ripple And Noise: Output voltage 1% 14, High-Voltage test : Primary to secondary: 3 kV 5 mA 60 S 15, Leakage Current : 0.5 mA (max) at input 240Vac 16, Operating Temperature Range 0--40¡æ 17, Storage Temperature Range: -20 --- 85¡æ 18, High Humidity Operation :+ 40 ¡æ and 90 ¡« 95% Humidity 19, Dimension : 74.0mm*41.0mm*47.5mm 20, Net weight: About 170 gram per unit. 21, Color : Black / White 22, The power adapter should have 50,000 hours according to MTBF. 23, Insulation Resistance:Primary to Secondary : 50 Meg. Ohms min. 500VDC. Customized.

Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; hold up time¡Ý20mS Cooling by free air convection; Auto recovery; Operation temperature: -40¡æ~+70¡æ; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50,000Hours, 2 years warranty Compliance to EN61347-2-13 /IEC61347-2-13 /UL8750.

Input voltage: DC24/48/110V Output voltage options: DC5/12/24V Output Power: 50W Size: 61.00 x57.90 x 12.70mm / 2.40x2.28 x0.50 inch HDL series power range: 50-350W. Small size, half brick design Wide input voltage range Typical efficiency 90% Switching frequency: 300KHz Overcurrent /Short circuit protection, Self-furbish Input-output isolate Board in-line type installs Metal case, Low Output Ripple High power density.

Input voltage: DC 5/12/24/48V Output voltage options: DC5/9/12/15/24V Output Power: 2W WR power range: 1W-2W. Wide inputvoltage range; Isolation; Regulated output; 1W Isolation voltage: 1500VDC, 3000VDC Efficiency: 80% Working temperature: -40C~ +85C MTBF¡Y 10¡¨¢ 105Hrs In line with RoHS codes Line Regulation(once input change 1%) ¡¨¤0.2% Load regulation(10%-100% full load) ¡¨¤0.5% Ripple and noise (20MHz Band width)

Features: Low ripple and low noise High resolution and accuracy (0.1mV/0.01mA) Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter Supporting high-accuracy and dynamic programming output High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Supporting remote voltage compensation and multidata storage Supporting external trigger input and output Power-on-self-test, software calibration and standard rack mount Using standard SCPI protocol Communication mode: GPIB/RS232/RS485/USB M8813(0-150V/0-1A/150W)

We are manfactured of power supply in china and the products have ce, ul and saa aslo. 1k, later tell you

Applicable: access control, electric lock Description: Power supply: AC85~264V/50HZ Output:DC5V DC9V DC12V DC24V (optional) Power:40W Efficient:80% Noise:

84Watt 12V-7Amp With Battery Backup Power Supply

18Watt 12V-1.5Amp Power Supply

24Watt 12V-2Amp Power Supply

36Watt 12V-3Amp Power Supply

60Watt 12V-5Amp Power Supply

60Watt 12V-5Amp With Battery Backup Power Supply

84Watt 12V-7Amp Power Supply

Aluminium die casting components ........for textile and plastic industries

Aluminium die casting components ........for textile and plastic industries