PSCF also produces necessary chemicals for construction, including Styrene Acrylic, Pure acrylic, and Vinyl acetate Homopolymer
Supreme bonding abilities Durable Excellent water tighties Wear & tear resistant
AREA OF USAGE: PLASTER AND PLASTER PLATE ROAD COATING SOIL CONDITIONER - FERTILIZER SPECIFICATIONS: DRY SOL�°DS @60C %60 -90 DRY SOLIDS @250C %60-90 W.S P205 % 2 MAX UNREACTED P2O5 % 1.5 MAX CO.CRYST.P2O5 % 1 MAX T.P2O5 % 4.5 MAX SO3 % 48 - 55 CaO % 33 - 41 Na2O % 0.35 MAX Fe2O3 % 0.30 MAX Al2O3 % 0.40 MAX K2O % 0.02 MAX MgO % 0.03 MAX Sio2 % 11 MAX F % 2 MAX CI PPM 700 MAX ORGANIC MATTERS % 0.5 MAX
ProBond-SS1 for dust control
Our product (ProBond-SS) is a water-based polymer product that can help in: * dust and sand control * Reduce Construction Cost * Reduce Maintenance Cost * Reduce Environmental Impact * Fast results The product can be used in: * Stabilization and dust control of open desert sand. * Polymer Sand road alternative to asphalt. * Dust control on construction sites. * Dust and erosion control of highway embankments and pipeline embarkments, railways, helipads, and pedestrian walkways. Also, our product is environment friendly.
ProBond SS-MAX for Polymer Sand roads
Platina Hi-Gloss is an aluminium oxide paste for final polishing of direct or indirect anterior and posterior resin restorative materials. It contains potassium nitrate topical desensitizer for patient comfort. INDICATIONS Final polishing of composite restorations or veneers PRODUCT BENEFITS Non splatter-non drying formula Spearmint flavored With potassium nitrate topical desensitizer
Light Cured Radiopaque Calcium Hydroxide Paste Cal LC is light cured radiopaque calcium hydroxide paste useful in pulp capping and as a protective base/liner under dental filling materials, cements & other base materials. INDICATIONS For direct & indirect pulp capping Acid protection when applying etch technique As cavity liner under all filling materials PRODUCT BENEFITS Time-saving, direct application and light curing Ready to use one component material Acid Resistant Effective protection of the pulp Light Cured Radiopaque Calcium Hydroxide Paste Cal LC is light cured radiopaque calcium hydroxide paste useful in pulp capping and as a protective base/liner under dental filling materials, cements & other base materials. Helps formation of secondary dentine Excellent adhesion to composites High compressive strength Low solubility in oral fluids
Product Description ZHUOJUN® polyvinyl alcohol powder, also known as ZHUOJUN® PVA, is slightly off-white to beige stable non-toxic water-soluble macro-molecular synthetic polymer, which is made from vinyl acetate through the polymerization and saponification and quickly dissolves in water to form a stable colloid. It exhibits excellent water solubility, bonding strength, film forming properties and chemical stability. Chemical Properties ZHUOJUN® PVA can be regarded as a linear macro-molecular polymer with a secondary hydroxyl group. The hydroxyl group in the molecular of the PVA powder has high activity and can carry out typical chemical reactions of low alcohols, such as esterification, etherification, acetalization, etc., and can also react with a variety of inorganic or organic compounds. Typical Applications: - various construction mortar - dry powder render/putty - tile adhesive - gypsum spray plaster binder ZHUOJUN® PVA Advantages: -Improves bonding strength -Improves smoothness and surface gloss -Improves oil resistance and abrasion resistance -Improve film forming properties and chemical stability Technical Data Model No. PVA2488-01A Degree of Polymerization 1750±50 Saponification Value (mol %) 86.5-88.5 Viscosity (mPa's) 45.0-55.0 Volatile Matter (%) â?¤5.0 Sodium Acetate Content (%) â?¤1.5 pH Value 5-7 Particle Size (μm) 120-180 Application Various Construction Mortarï¼?Dry Powder Renders and Tile Adhesiveï¼?Gypsum Spray Plaster Binder; Suitable for wall, ceiling finishes and tile fittings Packaging A.Standard packed in 25 KG per paper plastic composite bag B.Big bags or other special packages are possible on request Weight/20' container: approx. 16 metric tons with pallets, approx. 18 metric tons without pallets Storage Stored in its original packaging in a dry and place with temperature below 30 Warranty It is recommended to use ZHUOJUN® PVA powders within 6 months. If not caked under prolonged storage, they can still be usable. Notes The unused ZHUOJUN® PVA powders have to be sealed to avoid moisture in contact with air.
We offer : ISE MEL-101 is a powder form superplasticizer of a sulphonated polycondensation product based on melamine. Is especially optimized forplastification and water reduction of cement andcalcium sulphate based materials, e.g.
High shine formula. Labor saving, brings back worn marble to its original shine. Easy to use with 175 rpm machine & Steel Wool Pads
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications. Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.
USD650/T FOB shanghai.This is Heaven Zhu from Chemix Specialty Chemical Co.,ltd(C.S.C), in China. We are promoting 98% Calcium Formate on construction grade.
PHYSICAL PROPERTIES Physical state: Liquid Appearance: Colorless, Clear Chemical Formula: Ca (NO3) 2 pH: 6.00 - 8.00 (in 10% water) Density: 1.350 - 1.380 gr / cm3 @ 20 C It is used as a set accelerating additive in concrete chemicals. It increases the early strengths of concrete without negatively affecting the final strengths. Shelf Life: 12 months Packaging: 200 kg, 30 kg, 60 kg plastic drums 200 kg barrel 1000 kg IBC Pouring.
DEFOAMER DFK-25 Used As A Defoamer In Concrete Applications. It is a silicone based defoamer. It shows a strong defoaming effect even when used in small amounts in water-based systems. Product performance is not affected by the pH of the system. Shelf Life: 12 months Packing: 200 kgs/ iron drum net (16tons/FCL); 1000kgs/IBC (18tons/FCL); 20-23 tons/ isotank.
High Slump Retention. PCE-High Slump Retention is a new generation superplasticizer for concrete. It contains polycarboxylate ether polymers and is specially formulated for ready-mix concrete where slump retention, high strength and durability are required in hot climates. It is chloride-free, meets SS EN 934, Set retarding/high range water reducing/superplasticizing admixtures, and ASTM C 494 requirements for Type F & G. It is also compatible with all cements meeting the ASTM standards. As an ideal admixture for the ready-mixed concrete industry, PCE superplasticizer has the ability to work with a low water/cement ratios and still obtain extended slump retention to make high-quality concrete.
Hydroxyethyl cellulose(HEC) is a gelling and thickening agent derived from cellulose. HEC is non-ionic, water-soluble materials that provide good properties of thickening, suspending, binding, emulsify, film-forming, stabilize, disperse, retain water and etc. And It is widely used in coatings, construction, papermaking and polymer polymerization industries.
Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose used in building materials, which can be dissolved in hot or cold water to form a transparent solution with a specific viscosity. Normally HPMC is widely used in dry-mixed mortar industry, ceramic tile binder, external insulation system, self-leveling mortar, plastering, putty, paint and so on, it can improve construction performance, water retention performance, bond strength and sagging resistance.
We offer to our clients a high quality of Epoxy hardener that are used for making epoxy floor coatings, adhesives, sealants, composites etc.
Product Category- Waterproofing Product Name- Scott proof Hi Power Description of the product- Integral liquid waterproof compound for plaster & concrete Area of Use (Application)- For waterproofing of concrete & mortar used in basements & water retaining structures. Plastering bathrooms, balconies and water tanks Category (For Painters, Carpenters, etc.)- Contractors/Painters USP of the product- 1. Reduces dampness by improving waterproofing of concrete & Plaster 2. Enhances anti corrosion property of steel 3. Reduces cracks in plaster and rebound loss Area of application- Plaster & Concrete
