I am representing a company that has 20,000 tons of Titanium mined and out of the ground in Mexico. The company had mined this for a Chinese company which did not honor its contract. The company is willing to sell this product at a discount. There is additional product in the ground waiting to be extracted. The next step needs to be a call between the buyer and seller
U.S. Titanium machining part According to drawing or sample Gr2, gr5(ti-6al-4v), gr7, gr12 etc. According to drawing
U.S. Titanium casting Gr2, gr5(ti-6al-4v) etc. Astm b367 , bms 7-310, bms 7-310, asme sb367, etc. Technique: Lost-wax investment casting, lost-foam investment casting, which are capable of complicated shapes and small features, high precision and good surfaces. Equipment: wax injection machines, desiccant rooms, dewax machines, vacuum mel towers, sinter kiln and ultrasonic inspection machines etc. Size : as per clients, drawings and requirements , from 5g to 30kg. Process: wax injecting, slurrying , dewaxing , sintering, casting and furbishing.
Titanium ore (73% titanium,20.41% iron metal)
100 tons of Titanium ore 73% titanium and 20.41 iron metal
Titanium bars & rods.
Titanium billets, plates.Turnkey service that includes certificates, transportation, logistics, manufacturers, distributors, OEMs
Titanium Bar.
Gr5 titanium carbide plate.
Titanium pipes.
Titanium Bar.
Titanium tube, titanium machining, titanium bolt, titanium screw, titanium plate, titanium sheet, titanium billet, titanium bar, titanium wire, titanium foil, titanium tube sheet, titanium.
Titanium Plate, Bar, Pipe, Anode, Forging, Wire.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
OD: 5-600mm/0.2-24; Length:100mm-6000meter. Grade 1, 2, 5, 7 and 23 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
SML tube OD:3-114mm / 0.12-4.5; Wall thickness:0.2-9mm; Welded tube: OD:4-914mm/0.16-36; Wall thickness:0.4-30mm; Length: 100-6000mm Grade: GR1,GR2,GR7,GR9,GR5,GR12. Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
OD:0.5-4.9mm/0.02-0.2; Length:500-1500 mm Grade: ERTi-2,ERTi-5,ERTi-7,ERTi-9 Surface:Pickling,Polished Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 5 - 10 Kg
OD:20-114mm/0.78-4.5 Wall thickness:1.65-4mm; Length:500-3000mm. Grade:Gr1,GR2,GR5,GR9,GR7,GR12 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 100 Kg
Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.
Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1