North American Metal Products Suppliers and Manufacturers

CPU Scrap

HONEY consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Different composition proportions are the first difference. Yellow brass is composed of about 60% or 70% copper; 30%-40% zinc, and trace amounts of tin and zinc. While red brass contains approximately 85% copper and 15% zinc, with very little tin and lead input properties name Brass honey scra category Brass honey melting point 905-932 ensile Strength, Ultimate 345 MPa ensile Strength, Yield 135 MPa use copper extraction, recycle

Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.

Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.

We are one of the leading exporters of Aluminum scraps such as Stainless Steel Scraps and we are looking for serious buyers who in need contact us. We have been in business for many years Stainless Steel Scraps 304Scrap Material: SS201,SS304,SS316Factories direct materialGrand: 1stWe supply Stainless Steel Scraps of 201,304,316 etcStainless Steel:Grade 304Grade 310Grade 316400 SeriesClean Grade 'A' 304 Stainless Steel Scrap with no attachments.Commodity: 304 Stainless Steel ScrapDescription of commodity: 304 Stainless Steel ScrapSpecificationNickel------------8% to 10%Chromium---------10% to 17%C---------------- 0.08%MN-------------- 2%SI-------------- 1%P--------------- 0.045%S--------------- 0.03% High quality stainless steel scrap 201,304,430 and 316 in stock factory price stainless steel scrap SS304 and 316 Specification

We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets. Quick Details : Place of Origin: Germany/Poland /Spain Brand Name: Brass Model Number: 99.9% Copper honey brass Scrap Type: Brass Honey Copper Content: 99.99% Supply Ability Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts. TEST RESULT : Copper: 99.9% Carbon: 0.03% Phosphorus: 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003% Scrap Contains -Cables -Scrap Motor Winding wires -Bus Bar Strips, etc Used As A Raw Material In - Copper Wire Drawing Units - Foundries - Copper Utensils Manufacturing Units - Automobile Industries.

Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale

R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants

GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.

Virgin Mercury purity = 99.99% Pure by wt min. - Free from heavy metals - Packing iron cylinder ( 34.5)kg net weight - Physical State: Liquid - Appearance: silver - Odor: odorless - PH: Not available. - Vapor Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decomposition Temperature: Not available. - Solubility: Insoluble. - Specific Gravity/Density: 13.59 (water=1) - Molecular Formula :Hg - Molecular Weight: 200.59 Mercury Packaging: * 34.5kg virgin steel flask

Clean HE9 Aluminum is the most desirable aluminum for scrapping. This is very similar to 6063 aluminum alloy which is used in production of different products due to its ability to be formed in complex shapes with smooth surfaces. Often used in window and door frames and signage.

Post consumer steel material that is clean, painted, galvanized, or coated and less than 1/4 inch thick. Must be free of insulation, plastic, rubber, or other contaminants.

999 Copper Granules Copper Casting Grain Granules Copper granules 0300 mm 4mm Cu min 999 Cu min 999 Pb 003 max Al 0002 max Zn 005 max Ni 005 max Size 0300 mm 4 mm CAS no 7440508 Place of origin EU