Equipped with remote programmer, can realize external remote programming settings. Five working frequencies selectable (1KHz/2KHz/3KHz/4KHz/5KHz) Six welding control modes (constant peak current, constant secondary current, constant voltage, constant power, constant pulse width, hybrid control) Quality Judgment And Control Function: Instantaneous and average values of current, voltage and power can be monitored at the same time, and pressure and displacement values can also be monitored. The upper and lower limits of the parameters can be set, and the pressure trigger and displacement depth interrupt functions are supported. Quality Traceability Function: The database can store more than 5 million welding data of welding points, and support U disk export. Welding Process Visualization: Man-machine touch interface with oscilloscope and detector functions, real-time display of current, voltage, power, resistance and other 8 real waveforms and corresponding welding data. Support multi-stage discharge, also has a slow rise and fall function Diagnostic Protection Function: With more than twenty kinds of welding fault diagnosis, welding protection module, as well as monitoring and alarm function. More suitable for the automotive industry, the whole series standard with adaptive intelligent welding function, according to the welding process of external conditions change, automatically adjust the current and time, to ensure the welding quality, to solve the problem of shunt, edge welding, non-conductive gap welding, pressure changes, plate thickness inconsistency and so on.
Five working frequencies selectable (1KHz/2KHz/3KHz/4KHz/5KHz) Six welding control modes (constant peak current, constant secondary current, constant voltage, constant power, constant pulse width, hybrid control) Quality Judgment Function (Monitoring Function): Instantaneous and average values of current, voltage and power can be monitored at the same time, and pressure and displacement values can also be monitored. Quality Traceability Function: The database can store welding data such as current, voltage and power of more than 100000 welding points, and support U disk export, which is convenient for welding quality monitoring and tracking. Welding Process Visualization: HD touch screen with oscilloscope and detector functions, real-time display of current, voltage, power, resistance and other real welding waveforms and corresponding welding data.Support multi-stage discharge, also has a slow rise and fall function Diagnostic Protection Function: With more than twenty kinds of welding fault diagnosis, welding protection module, as well as monitoring and alarm function. Proportional Valve Control Function (Optional): Automatically adjust the pressure of the head through parameter settings, the maximum support for the 10-stage variable pressure, to ensure the stability and consistency of air pressure. Automation control: Equipped with rich I/O interfaces, supporting a variety of communication protocols (RS-232, RS-485, Ethernet, etc.).
DT series high frequency welding transformer, composed of rectifier module, iron core, winding, water cooling cycle, has the characteristics of low output secondary voltage, large current and fast current rise, and supports free switching of 1KHz/2KHz/3KHz/4KHz/5KHz working frequency.
IDP series inverter DC welding power source, as a masterpiece independently developed by Huandian, integrates high-frequency inverter and advanced DSP control technology. The core components are selected from imported components to ensure the excellent performance and long-term durability of the product. Its high-precision control system (accuracy up to 0.2 ms), low-heat design, micro-damage treatment of workpieces, beautiful weld appearance, strong welding tension and high stability all demonstrate Huandian's ultimate pursuit of welding quality. At the same time, the power source also has comprehensive data monitoring and quality traceability functions, providing strong support for lean production in modern manufacturing. 1A precise current regulation can be realized. Five working frequencies selectable (1KHz/2KHz/3KHz/4KHz/5KHz). Six welding control modes (constant peak current, constant secondary current, constant voltage, constant power, constant pulse width, hybrid control). Quality Judgment And Control Function: Instantaneous and average values of current, voltage and power can be monitored at the same time, and pressure and displacement values can also be monitored. The upper and lower limits of the parameters can be set, and the pressure trigger and displacement depth interrupt functions are supported. Quality Traceability Function: Database function, can store more than 5 million welding data of welding points, and support U disk export. Welding Process Visualization: Man-machine touch interface with oscilloscope and detector functions, real-time display of current, voltage, power, resistance and other 8 real waveforms and corresponding welding data. Support multi-stage discharge, also has a slow rise and fall function. Diagnostic protection function: with more than twenty kinds of welding fault diagnosis, welding protection module, as well as monitoring and alarm function. Automation control: Equipped with rich I/O interfaces, supporting a variety of communication protocols (RS-232, RS-485, Ethernet, etc.). It is extremely suitable for ultra-precise electronic components and medical precision parts.
Automatic Constant Feed Speed Control: Automatic output voltage adjustment in real-time to ensure constant preset feed speed regardless of weight change of the workpieces. Automatic Resonant Frequency Search: Search out and output the resonant frequency of the load. other related parameters are also set automatically Rs485 Communication: All parameters of the controller can be adjusted via R485. Sync Output: Sync the output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid beat effect Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself. Overcurrent Protection: If output current exceeds its rated value the controller will stop its output to protect itself and the load. Restorable Short Circuit Protection: If the controller's output is short-circuited, it will shut down its production to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on.
Frequency Adjustment: The output frequency of the controller can be manually adjusted to the resonant frequency of the vibratory feeder to get smooth, quiet, and energy saving feed effect Automatic High Precision Voltage Requlation: The internal digital voltage regulation circuit can eliminate feed sped variation caused by mains voltage fluctuation. Time Adjustable Soft Start: The controller will increase output voltage from 0 to the preset value when powered on to avoid a sudden shake. soft start time can be digitally preset Switch Sensor ON/OFF Control NPN switch sensor or PLc can be connected to turn on/off the controller. Photoelectric Sensor ON/OFF Control: The cuH inteligent Photoelectric sensor can be connected to turn on/off the controller.Remote speed Control. The output voltage of the controller can be adjusted remotely by an external potentiometer, a Plc, or a 1-5v DC signal. DC Control Output: The controller can output low voltage DC power asociated with ON/0ff Control of the controller to drive a solenoid or other external devices.Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/Off button and hold
CE certificated, RoHS compliant. Frequency Adjustment: The output frequency of the controller can be manually adjusted to the resonant frequency of the vibratory feeder to get a smooth, quiet, and energy-saving feed effect. Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation. Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the preset value when powered on to avoid sudden shaking. Soft start time can be digitally preset. Switch Sensor ON/OFF Control NPN switch sensor or PLC can be connected to turn on/off the controller. Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller. Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal. DC Control Output: The controller can output low voltage DC power associated with the ON/OFF Control of the controller to drive a solenoid or other external devices. Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and holding for 2 seconds. Digital Overheat Protection: If the internal temperature of the controller gets too high, the controller will stop its output to protect itself. Overcurrent Protection: If the output current exceeds its rated value, the controller will stop its output to protect itself and the load. Restorable Short Circuit Protection: If the controller's output is short-circuited, the controller will shut down its production to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power is on. Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by a voltage that is too high.
3.7KW AC EV Charger Tethered Wallbox 3.7 kw home charger tethered wall box is suitable for all commercial charging needs. It delivers all the safety and smart charging features you need to make charging easy, reliable, and cost-effective for your customers, tenants, and employees. It's built for long-time service, waterproof, and designed to work at -30 to 55 �°C ambient temperature, never fearing freezing or the scorching heat. Customers can customize some features including the color, logo, functions, casing, etc.
DZ47Z-63 1P 2P 3P 4P 1-DC MCB 63 AMP 2 Pole Miniature circuit breakers (MCBs) are electrical devices that ensure electrical safety in homes, offices and other buildings as well as for industrial applications by protecting electrical installations against overloads and short circuits. Highlights of DZ47Z-63 1P 2P 3P 4P 1-63A DC MCB 1. Protection: Miniature circuit breakers provide protection against overloading, short-circuiting, and earth-leakage. 2. Automatic Operation: The 63 DC MCB trips automatically in case of a fault to prevent damage to the circuit and protect the equipment. 3. Compact Size: MCBs have a small and compact size, making them easy to install and require less space than traditional fuses. 4. Resettable: Unlike traditional fuses, MCBs are resettable and can be reused after tripping.
3.7KW EV Charger AC Socket Wallbox Our 3.7KW ac electric vehicle charger socket wallbox is a compact, efficient EV charging station for home or small business use. It offers universal compatibility, advanced safety features, and reliable operation for electric vehicle charging.
A DC MCCB (Direct Current Molded-Case Circuit Breaker) is essential in providing protection against electrical hazards in DC systems. Compared to traditional fuses, they offer reduced maintenance costs, increased safety, and higher breaking capacities. DC MCCBs come in two main types: thermal magnetic and electronic trip, and should be properly selected based on system requirements. By regularly inspecting and testing MCCBs, proper functioning and protection is ensured. DC MCCBs have a wide range of applications, including renewable energy systems and industrial machinery.
GIGABYTE AORUS GeForce RTX 4090 MASTER 24GB Product Key Features Memory Type GDDR6X APIs DirectX 12 Ultimate, OpenGL 4.6 Memory Size 24 GB Chipset/GPU Model NVIDIA GeForce RTX 4090 Chipset Manufacturer NVIDIA Features RGB Lighting, G-SYNC/FreeSync Compatible Power Cable Requirement 16-Pin PCI-E Connectors DisplayPort, HDMI Compatible Slot PCI Express 4.0 x16
NVIDIA GeForce RTX 4080 SUPER Founders Edition 16GB Model Brand NVIDIA Series Founders Edition Interface Interface PCI Express 4.0 Chipset Chipset Manufacturer NVIDIA GPU Series NVIDIA GeForce RTX 40 Series GPU GeForce RTX 4080 SUPER Core Clock 2290 MHz Boost Clock 2550 MHz
ASUS ROG Strix GeForce RTX 3080 OC 10GB GDDR6X Product Key Features Memory Type GDDR6X APIs CUDA, DirectX 12, OpenGL 4.6, Vulkan Memory Size 10 GB Chipset/GPU Model NVIDIA GeForce RTX 3080 Chipset Manufacturer NVIDIA Features VR Ready Cooling Component Included Fan with Heatsink Power Cable Requirement 8-Pin + 8-Pin + 8-Pin PCI-E Connectors DisplayPort, HDMI Compatible Slot PCI Express 4.0 x16
PNY 4090 GeForce RTX 4090 XLR8 Gaming VERTO Brand PNY Connectors DisplayPort, HDMI Chipset Manufacturer NVIDIA Memory Size 24 GB APIs DirectX 12 Ultimate, OpenGL 4.6 Power Cable Requirement 16-Pin PCI-E MPN VCG409024TFXXPB1-O Features RGB Lighting, G-SYNC/FreeSync Compatible Compatible Slot PCI Express 4.0 x16 Memory Type GDDR6X Chipset/GPU Model NVIDIA GeForce RTX 4090
ZOTAC GAMING GeForce RTX 4090 Trinity OC 24GB Product Key Features Memory Type GDDR6X APIs DirectX 12 Ultimate, OpenGL 4.6 Memory Size 24 GB Chipset/GPU Model GeForce RTX 4090 Trinity OC Chipset Manufacturer NVIDIA Features RGB Lighting, G-SYNC/FreeSync Compatible Connectors DisplayPort, HDMI Compatible Slot PCI Express 4.0 x16
GIGABYTE GeForce RTX 4060 TI AERO OC 8GB Graphics Card Title: GIGABYTE GeForce RTX 4060 TI AERO OC 8GB Graphics Card - 8GB GDDR6 18Gbps 128bit, PCI-E 4.0, 2x DisplayPort 1.4, 2x HDMI 2.1a, NVIDIA DLSS 3, Supports 4K, Ada Lovelace Arch, GV-N406TAERO OC-8GD Condition: New Description: Game, stream, create. The GeForce RTX 4060 Ti let you take on the latest games and apps with the ultra-efficient NVIDIA Ada Lovelace architecture. Experience immersive, AI-accelerated gaming with ray tracing and DLSS 3, and supercharge your creative process and productivity with NVIDIA Studio. Brand: â??Gigabyte Type: Network Cards MPN: TAERO OC-8GD Color: â??White Series: â??GV-N406TAERO OC-8GD Compatible With: Desktop Item Weight: â??880 gg Dimensions: â??28.1 x 11.7 x 5 cm; 880 Grams Item Length: 281mm Item Width: 117mm Item Height: 50mm Supported Technologies: Supporting Nvidia DLSS 3, ultra-efficient Ada Lovelace architecture, ray tracing, NVIDIA Reflex, GeForce Experience & All NVIDIA Studio applications Core & Clocks: Boost Clock 2580 MHz, Memory Size 8GB, Memory Type GDDR6, Memory Bus 128-bit Cooling: Windforce cooling system, 3 x 80mm blade fans, 4 composite copper heat pipes, a copper plate directly touches the GPU, 3D active fans, & screen cooling. RGB Fusion Visuals: 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready I/O & Connectivity: PCIE 4.0, 2 x DisplayPort 1.4a, 2 x HDMI 2.1a, DirectX 12 Ultimate
GIGABYTE GeForce RTX 3080 Ti GAMING OC 12GB GDDR6X Brand GIGABYTE Connectors DisplayPort, HDMI Chipset Manufacturer NVIDIA Memory Size 12 GB APIs DirectX 12 Ultimate, OpenGL 4.6 Power Cable Requirement 8-Pin + 8-Pin PCI-E MPN GV-N308TGAMING OC-12GD Features RGB Lighting Compatible Slot PCI Express 4.0 x16 Memory Type GDDR6X Chipset/GPU Model NVIDIA GeForce RTX 3080 Ti
Gigabyte NVIDIA GeForce RTX 4070 WINDFORCE OC Chipset Manufacturer NVIDIA APIs DirectX 12 Ultimate, CUDA, OpenGL 4.6 Power Cable Requirement 8-Pin PCI-E MPN GV-N4070WF3OC-12GD Item Length 10.27 in Memory Type GDDR6X Brand GIGABYTE Connectors DisplayPort, HDMI Memory Size 12 GB Item Height 1.96 in Features G-SYNC/FreeSync Compatible Compatible Slot PCI Express 4.0 x16 Cooling Component Included Fan with Heatsink Item Width 4.96 in Chipset/GPU Model NVIDIA GeForce RTX 4070
NVIDIA GeForce RTX 3080 Founders Edition 10GB GDDR6X Brand NVIDIA Connectors DisplayPort, HDMI Chipset Manufacturer NVIDIA Memory Size 10 GB APIs DirectX 12 Ultimate, OpenGL 4.6, Vulkan Power Cable Requirement 8-Pin + 8-Pin PCI-E MPN 9001G1332530000 Features RGB Lighting, Multiple Monitor Support, G-SYNC/FreeSync Compatible, VR Ready Compatible Slot PCI Express 4.0 x16 Memory Type GDDR6X Chipset/GPU Model NVIDIA GeForce RTX 3080
