70 MW GE 6FA Gas Turbine, simple cycle, Natural Gas Fuel, 3000 rpm, 11.5 KV, 50 HZ, Very low hours since installation at new. Gas-supply pressure requirement bar 27, Dry Low NOx, water steam injection with no emissions. Complete plant with auxiliary equipment. All operation and service reports available. Plant is presently stopped and maintained under the OEM preservation program. The plant is in exceptional condition and can easily be installed at the new facility to generate 70 MWâ??s of electricity. Gas Turbine package is being sold at a budgetary affordable price and is a very good investment return
New Surplus (3) GE 40 MW 6B (HFO) Gas Turbines New Surplus Heavy Duty (3) GE 40 MW 6B Simple Cycle Heavy Fuel Oil Turbines with Warranty. The New surplus turbines are available due to a cancelled project and come with GE transferable warranty. The turbines are heavy duty and designed to run on heavy fuel oil, 11.5 KV, 3000 rpm, 50 HZ, Fuel: Heavy Fuel Oil (HFO) and Distillate Fuel Oil. These are complete turbines with all fuel systems, electrical systems, control systems, air systems, cooling systems compressor systems, starting system, Lubricating system, fire fighting system and much more.
31 MW GE LM2500+ Gas Turbine General Electric LM2500+HSPT 31132 kW, Commissioned in 2004, Natural Gas, Brush Generator rated at 47500 KVA, 50 HZ, 11500 V, can be upgraded to dual fuel system. Next overhaul hours are required after 3579 running hours. Turbine package can be put into service or used for spares for an already existing plant. This plant is reduced in price and is the most affordable LM2500 + on the market.
52 mw man diesel hfo complete power plant (7) 7600 kw man 16v32/40 sixteen-cylinder four-stroke, turbocharged and charge-air cooled engines, (7) heavy duty generators, year 2001, 750 rpm, 50 hz, only 7, 000 hours since installation, cooling system, lube oil system, lubricating oil system, control and monitoring system, electrical system, heavy fuel oil system, heavy fuel oil purification system: pumps, air system, exhaust gas system, compressed air system, heat recovery system, steam distribution system, boilers, transformers, tanks, tank farm equipment , water treatment, reverse osmosis system, desox system, start up boiler, fire fighting system, discharge pumps, water pumps, forced draft ventilation system, black-start-diesel generating set, piping, power house crane, hoist equipment and tools and spares. This is a complete plant that can be purchased a very good price.
New surplus (3) ge 40 mw 6b (hfo) gas turbines New surplus heavy duty (3) ge 40 mw 6b simple cycle heavy fuel oil turbines with warranty. The new surplus turbines are available due to a cancelled project and come with ge transferable warranty. The turbines are heavy duty and designed to run on heavy fuel oil, 11.5 kv, 3000 rpm, 50 hz, fuel: heavy fuel oil (hfo) and distillate fuel oil. These are complete turbines with all fuel systems, electrical systems, control systems, air systems, cooling systems compressor systems, starting system, lubricating system, fire fighting system and much more.
52 mw man diesel hfo complete power plant (7) 7600 kw man 16v32/40 sixteen-cylinder four-stroke, turbocharged and charge-air cooled engines, (7) heavy duty generators, year 2001, 750 rpm, 50 hz, only 7, 000 hours since installation, cooling system, lube oil system, lubricating oil system, control and monitoring system, electrical system, heavy fuel oil system, heavy fuel oil purification system: pumps, air system, exhaust gas system, compressed air system, heat recovery system, steam distribution system, boilers, transformers, tanks, tank farm equipment , water treatment, reverse osmosis system, desox system, start up boiler, fire fighting system, discharge pumps, water pumps, forced draft ventilation system, black-start-diesel generating set, piping, power house crane, hoist equipment and tools and spares. This is a complete plant that can be purchased a very reasonable price.
80 MW LM2500 + Dual Fuel Gas Turbine Power Plant Complete plant with (2) Two 30 MW LM2500 + Gas Turbines, (2) Two Steam Turbines, HRSG (Heat Recovery Steam Generators), 11 KV, 50HZ, Plant installed in 2005, Dual Fuel: Natural Gas (NG) and Liquid Fuel, Hours run since overhaul 3700 hrs. & 5000 hrs., (3) Transformers, condensers, electrical systems, control systems, cooling systems, compressor systems, starting system, lubricating system, fire fighting system and much more. Complete package, very well maintained.
A device has been pulled from service and contains one tadiran tl-4920/s, 3.6 volt 8500mah c lithium battery. The device was designed for a 20year life and have been pulled from the field within the first 0-3 years. Two styles exsist: battery encased in plastic or gel. Samples available. Estimate +250,000 available over next 1.5 years. -
Used SB 210+ units with various hours.
if interested to buy
Aukey Home Oven, Blender, Vacuum Sealer
wave inverters are designed for the toughest conditions for professional, semi-professional and recreational purposes. Even under the most extreme conditions the products from the Mass Sine series operate faultlessly, giving you round-the-clock output when necessary. The sustainability and technologies that underpin the Mass concept have long been proven in practice. With an MTBF of 280,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply. Specifications: AC Connection Type: Hardwire DC Connection Type: Hardwire GFCI: No Outlet Qty: None Inverter Surge Rating: 5000w Inverter Input Voltage: 24v Inverter Output Voltage: 230v Waveform: True Sine Wave Inverter Cont. Output Wattage: 2000w Box Dimensions: 8"H x 15"W x 21"L WT: 26.3 lbs
Ouli toroidal security system transformer are widely used in security system such as CCTV monitoring system, access control system, parking management system, fire protection system, emergency alert system, building intercom system etc..
Motor manufacturer Pump manufacturer Motor information: 208-230/460 Volts, 60Hz, 3 pH RPM 355 40 HP Pump Information Model 4 x 3C -6.62-30P36BST
400 MHz 32-bit ARM9 processor with 128 MB SDRAM or 256 MB SDRAM, 128 MB Flash memory or 256 MB Flash memory Internally scalable true type font engine Firmware emulates TSPL, EPL, ZPL, ZPL II, DPL Bartender�® Free Windows drivers and label design software (available via download) Provide Windows printer utility, Windows SDK and Android SDK Introduction Efficient label management is crucial in modern warehouse operations. Heavy-duty ribbon barcode printers have become the perfect solution for warehouse label management, enhancing label durability, readability, and management efficiency.
Hi ! We are barcode printer and POS printer manufacturer since 1999, our main products are Industrial Barcode Printers, Desktop Barcode Printers, Mobile Thermal Printers, Thermal Receipt Printers. If you're involved in POS, AIDC industry business, we welcome your inquiry, please kindly leave your email and whatsapp, our sales managers will be pleased to get in touch to provide you helpful support.
203dpi resolution, 8 inch/s print speed; USB+USB HOST + Series + Ethernet, Bluetooth and Wi-Fi conncet; USB Host for standalone applications, support barcode scanner, PC keyboard connection; Widely use in manufacturing industry, warehouse industry, logistics industry, retail industry and so on.
Healthcare Real-time identification of patient identity and case information has become a global need for major hospitals and healthcare organizations. By using barcode technology to print medical labels and medical wristbands to store patient identification information and track the data in real time, the overall quality of care can be improved and patient safety can be enhanced. Thanks to the utility and reliability of medical labels and medical wristbands, barcode technology has become an important tool in most healthcare systems. Gainscha offers patient-centric healthcare printing solutions to help your care team provide a higher level of patient care.
GAINSCHA is a leading global manufacturer in Barcode printer and POS Printer with a complete product line. We have a comprehensive operation platform integrating design, development, production, sales and services. Committed to introduce value-added printing products and services to commercial users in the retail, catering, government, logistics, healthcare, manufacturing and other segments around the world. Established in 1999, we have a self-owned production plants with more than 40,000 square meters and hired more than 600 employees located in Zhuhai, China. We specialize in innovation, quality and reliability. Our R&D staff is close to half of the total number of employees, it enhanced our ability to the short cycle product development. We have owning over 50 national patents on the key technology of thermal printing and will consistently adhered to the independent research and product development. Besides the core Barcode-Receipt printing business, we have introduced Printing mechanism and Android label printer terminal to meet the diversified printing needs of the commercial market. We focus not only on our research and development, but also open collaborations. We have a strong network in exporting to Europe, USA, Canada, South America, Africa, Asia, HongKong, Taiwan and etc recently. We welcome deep partner ship opportunities in all over the world, being one of your most reliable manufacturing partner.
80mm Thermal Receipt Printer GP-U80300II Key Features Compatible with EPSON ESC/POS and STAR Line mode command sets Support paper near end and black mark detection Connect and printer faster, stop Receipt misprinting Support connecting to WLAN printing Virtual serial port mode, USB port support OPOS application 300mm/s ultra speed Built in Web page to set up printer directly Support 2D barcode printing. High speed driver printing mode,66% improvement in print Serial+USB+Ethernet, Parallel+USB interfaces
