Non Woven Free Size Disposable Shoe It Keeps Both Contamination From Shoes And Contaminated Shoes From Spreading The Disease. Put On Your Shoe Covers, Make Sure That All Areas Of The Foot And Shoe Are Covered. Try Not To Touch The Floor Or Other Areas With Your Hands While Putting The Shoes Covers On
Product Tech
SMS Medical Nonwoven Fabric
Composition
100% PP
Weight Range
10gsm-100gsm
Workable Width
Between 100 and 3,100mm
Roll Diameter
Between 800 and 1,500 mm
Core Dia
76 mm
Color Option
White
Applications
Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature
1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging
Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications
ISO9001:2000, GMPC, SGS
Production Lead
20-40 days after receiving the deposit and confirming the samples
Payment Terms
30%T/T Deposit, Balance Against B/L Copy
OEM Service
Yes
Product Tech SMS Medical Nonwoven Fabric
Composition 100% PP
Weight Range 10gsm-100gsm
Workable Width Between 100 and 3,100mm
Roll Diameter Between 800 and 1,500 mm
Core Dia 76 mm
Color Option White
Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature 1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications ISO9001:2000, GMPC, SGS
Production Lead 20-40 days after receiving the deposit and confirming the samples
Payment Terms 30%T/T Deposit, Balance Against B/L Copy
OEM Service Yes
Product Tech SMS Medical Nonwoven Fabric
Composition 100% PP
Weight Range 10gsm-100gsm
Workable Width Between 100 and 3,100mm
Roll Diameter Between 800 and 1,500 mm
Core Dia 76 mm
Color Option White
Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature 1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications ISO9001:2000, GMPC, SGS
Production Lead 20-40 days after receiving the deposit and confirming the samples
Payment Terms 30%T/T Deposit, Balance Against B/L Copy
OEM Service Yes
3050 Non Woven Fabric Suppliers
Short on time? Let Non Woven Fabric sellers contact you.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~1m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1 m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m.
Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields.
Raw Material 100% Polypropylene
Color White, Black
Width 10-160cm
Weight 9-300gsm
Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc.
MOQ 3,000 KGS per item
Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples
Payment Terms T/T, L/C, D/P, etc.
Characteristics Customized as the application and requirements, some characteristics as follow:
1. High strength, small difference at longitudinal and longitudinal direction;
2. Acid, non-toxic, non-tradiation, harmless to human physiology;
3. With excellent breathability;
4. Master batch dying, never fade;
5. Smooth, bright color, roll slitting, easy use, best quality.
My name is Dmitri Hartsevnikov and I am representative of Oreon DG ltd company.
Today I would like to offer you UV resistant non-woven fabric, which is used in many occasions and has a great list of advantages. Some example of applications you will find below.
UV resistant non-woven is used for crop cover, frost protection, landscape fabric, green house shading, mulching, hobby gardening, insect protection, root bag, weed control, seed blanket, capillary matting.
UV resistant non-woven Properties & Advantages:
- Transmits the sunlight
- Preserves heat in soil
- Air permeable
- Hydrophobic & Hydrophillic grades available
- Flexible and durable
- Resistant to U/V light
- Prevents dripping
- Because of it's light weight it can be easily be laid and folded
- Reduces workmanship cost due to easy application
We can offer you products from that manufacturer.
For example, Spunbond SS 30gsm or BFE 99 we can offer to you 3.4 EURO per kg price inc delivery to you. (7-10 days after order confirmation)
If interested all documents will be provided upon request. At the moment, we start promoting products of that manufacturer in the UK. Therefore, samples will be provided free of charge.
Nonwoven fabrics are broadly defined as sheet or web structures bonded together by entangling fiber or filaments (and by perforating films) mechanically, thermally or chemically. They are flat or tufted porous sheets that are made directly from separate fibres, molten plastic or plastic film. They are not made by weaving or knitting and do not require converting the fibres to yarn. Typically, a certain percentage of recycled fabrics and oil-based materials are used in nonwoven fabrics. The percentage of recycled fabrics varies based upon the strength of material needed for the specific use. In addition, some nonwoven fabrics can be recycled after use, given the proper treatment and facilities. For this reason, some consider non-woven a more ecological fabric for certain applications, especially in fields and industries where disposable or single use products are important, such as hospitals, schools, nursing homes and luxury accommodations.
USES IN-
isolation gowns
surgical gowns
surgical drapes and covers
surgical masks
surgical scrub suits
caps
medical packaging: porosity allows gas sterilization
gloves
shoe covers
bath wipes
wound dressings
3050 Non Woven Fabric Suppliers
Short on time? Let Non Woven Fabric sellers contact you.
