SEP2910 is a one-component high-performance anti-mold sealant, solvent-free, no free isocyanate, no silicone small molecules and polymers, no pollution of the substrate, low VOC and environmental friendly. It is cured by reaction with moisture in the air, and can be cured at room temperature. No primer required. And it can be used as building decoration gap filing and sealing. It is long-lasting anti-mold.
Good operability: one component, easy to apply.
Environmental friendly: no solvent, low VOC, without pollution of substrate.
ood adhesive for various materials, such as glass, metal, PVC,ABS,PC,PET,PBTetc.
Excellent weather resistance
Paintable
SEP-1900 is a one component sealant based on silane end-capped polyether, without solvent, free isocyanate, small organic silicon molecule and polymer.It is environmental friendly, low VOC, and would not dirt the substrate, which is curing by absorbing the moisture from air in the room temperature.It performs excellent bonding to variety of construction materials, such as concrete, cement, stone, glass, ABS, PC, etc., therefore it could be widely used in construction and infrastructure areas.It has following characteristics:
ï??High transparency, would not turn yellow.
ï??Good operability: one component, easy to apply.
Environmental friendly: no solvent, low VOC, without dirt the substrate.
Excellent adhesive: bond well to variety materials, such as concrete, cement, stone, glass, and other construction materials.
MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer.
It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature.
Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity,
It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
Definition
Silicones are synthetic polymer containing alternate silicone and oxygen atoms as its backbone. Silicones are made from silicon (a metal obtained from silica sand) and methyl chloride (an organic compound) in a process known as the direct process. The Silicone sealant in the uncured state normally looks like a thick paste or cream. After curing the paste turns into an impressive rubber.
Applications
Silicone sealant are used as a form-in-place gaskets for engine & transmission applications, sealing of exterior joints, aquarium joints bonding, sealing of bath tubs, construction and glazing application, electrical potting & encapsulation, mould making, etc.
Curing Mechanism
RTV silicone systems use humidity or moisture in the air during curing and cannot be accelerated using heat (excessive heat in the curing process can be detrimental). Small amounts of by-product are also produced. The cure process will only take place if the material is open to the atmosphere and curing will be adversely affected if access to humidity is removed prior to the completion of the cure process.
Provided product types
One component RTV silicone sealant
Two component RTV silicone sealant
Packing, storing, shelf life and transport
Available packing sizes vary from 25 g to 25 kg, packed in lacquered coated aluminium tubes, HDPE cartridges and epoxy coated MS drums. Store products at room temperature (20C to 35C). Shelf life can vary from 4 - 12 months. They are safe to transport by road, air and sea.
We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging.
This product features: this product is made of silicone rubber modified silicone tube with heat shrinkage performance, not only has the general excellent performance of silicone tube itself, such as high temperature resistance, high pressure resistance, soft and elastic, but also has the heat shrinkage performance, good mechanical properties of puncture damage resistance, as well as long-term use is not easy to aging and other characteristics. Therefore, this product can be used in these fields: instruments, household appliances, aerospace, military, automotive manufacturing, electrical components, transformers, motors and other insulation, protection, etc.
We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand.
We can offer:
- Competitive prices
- High quality products
- Sample orders accepted
- Secure payment and delivery worldwide
- Free shipping for bulk orders
For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation.
Contact us:Mors
Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water.
Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours.
KEY FEATURES:
* Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.
* Colorless and non-yellowing protection preserves the natural appearance of the substrate.
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor
Supply Ability:
1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant
Packaging & Delivery
Packaging Details
For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft
For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft
For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft
Port: Qingdao Port
Lead Time : 5-15 days, depends on order details, payment time
Colors:
Clear, Black,
White, Grey,
Brown, Bronze ,
requested by customer
2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±20C:
Density (g/cm3)
±0.1
0.97
GB/T 13477
Tack-Free Time (min)
180
12
GB/T 13477
Tack-Free Time (min)
80
1000
GB/T 13477
Tensile Modulus (Mpa) /23
0.4
0.18
GB/T 13477
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
30
GB/T 13477
Curing Speed (mm/d)
23
As Cured -After 21 days at 50±5% RH and temperature 23±20C:
Hardness (Shore A)
20~60
34
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.4
GB/T 13477
Elongation of Rupture (%)
/
88
GB/T 13477
Movement Capability (%)
20
20
GB/T 13477
Storage
12 Months
Acrylic sealants are based on acrylic polymers and are recognised by several other names including decorators caulk, painters caulk or decorators acrylic. They are traditionally used as an economical filler and sealant mainly internally however some can be used externally.
General Purpose Silicone Sealant is an anti-bacterial; single component Acetoxy range sealant, which is cured by atmospheric moisture to form a high strength waterproof seal. It is multi-purpose silicone sealant which is flexible and has a powerful anti-fungicide property to prevent mould/bacteria growth.
Weather Sealant is a high-performance, neutral cure weather resistance silicone sealant. It has non-corrosive property, 50% Joint movement capability and low Tensile strength. It provides strong bonds to a variety of construction materials. Low string upon gunning, ease of application and ready to use.
Kazma KZWS-789 weatherproof neutral silicone sealant is a one-part, neutral and moisture cure, medium modulus silicone sealant that provides durable, pliable, watertight joints and offers outstanding adhesion without priming to most non-porous substrates.
With its unique weather-resistant formula, it possesses a balanced adhesive strength and very high recovery, making it ideal to withstand adverse weather conditions in common installations including moisture, movement, sheer, and de-flection, heat and cold resistant, aging resistant, UV resistant . It is easily runnable in all weather conditions from -20 to 120 degrees F.
Because our weatherproofing silicone caulking requires no mixing and a smaller joint ratio, it is an economical, high-performance alternative to other comparable sealants with a �±40 percent movement capability.
Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions
300% Tensile strength Strong tensile and flexible No cracking
Excellent toughness Excellent tightness No shrinkage
Colors - Clear, White, Black & any other color as per requirement.
Kazma KZGP-1000 Acetic cure Silicone Sealant is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics.
SINOLINK GP Acetic cure Silicone Sealant exhibits an excellent adhesion to glass tiles ceramics, fibreglass, aluminum, no-oily woods, painted surfaces, plastics and other non-porous surfaces.
Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions
300% Tensile strength Strong tensile and flexible No cracking
Excellent toughness Excellent tightness No shrinkage
Colors - Clear, White, Black & any other color as per requirement.
Kazma KZGP-1000 Acetic cure Silicone Sealant is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics.
SINOLINK GP Acetic cure Silicone Sealant exhibits an excellent adhesion to glass tiles ceramics, fibreglass, aluminum, no-oily woods, painted surfaces, plastics and other non-porous surfaces.
Excellent Weather Proof Ability Not changing in hot weather or cold weather conditions
300% Tensile strength Strong tensile and flexible No cracking
Excellent toughness Excellent tightness No shrinkage
Colors - Clear, White, Black & any other color as per requirement.
Acetic Silicone Sealant is a 100% silicone sealant,It has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component Silicone Sealant forms strong cohesive bonds to glass without the need of primers.The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
Shandong Factory Supply Neutral Weatherproof Silicone Sealant
Product Description
Material preparation:
For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.
DO NOT clean glass with soap and water solutions.
Soap residue can cat as a release agent and result in adhesion failure.
Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.
Application:
1. Glass must be properly prepared as described.
2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.
3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass.
Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.
Repair application:
The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums.
1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent.
Spply sealant as described above and tool.
2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage.
SINOLINK hot sale white structural mp1 silicone sealant gun prices
Product Specification
4863 Non Metallic Elements Suppliers
Short on time? Let Non Metallic Elements sellers contact you.
