thermal conductive silicone pad is high-performance,thermal conductive gap filling materials, mainly for the transmission interface between the electronic equipment,and heat sink or product outer coving. With nice stickiness,flexibility, good compression performance and excellent heat conductivity,it make the products can discharge gas from the electronic original and heat sink, to achieve fully conforming and obviously cooling effect. 1. Grade: Food Grade insulator Silicone Rubber 2. Size: customized 3. Standard: LMS 4. Certification: ISO9001, SGS, CTI, ROHS Product Name: thermal conductive silicone pad Material: Silicone Rubber Color: Blue Size: Custom size, longth is 100m Thermal conductivity: 1.0~6.0w/mk Used: High Temperature and insulators Dielectric breakdown Voltage: >4KV Volume Receptivity:1.5*10^12O.cm Specific gravity: 2.3g/cm^2
The product is suitable for control loop, signal protection and measuring circuitry with rated voltage up to 0.6/1kv which works below 180celsius degree. It is widely used in a-energy industry, automatic control units, home appliances, coal mine, power plant and heating units etc. Feature: 1, excellent plasticity and small bend radius locations 2, good performance in heatproof and cold resistant abilities when working temperature between -60celsius and 180celsius. 3, good performance in mildew resistance, percentage of water that sop up below 0.015% 4, excellent capacity of ozone aging resistance, ultraviolet radiation aging resistance and atmosphere aging resistance 5, cable with shield is lightning-proof, electromagnetism resistant and can poise the power 6, you should connect the ends of the shield to the earth when you are installing the cable with shield. Make sure that do not break and loosen the shield, otherwise the capacity of the shield will reduce very heavily.
Cas no: 7440-02-0 Eninec no: 231-853-9 Mf: ni Grade standard:industrial, reagent Purity:20nm 99.9%. 40nm, 70nm, 100nm 99.8% Appearance: black powder Application:catalyst Size: 20nm 40nm, 70nm, 100nm Shape:spherical Note: we can supply different size products of electrode materials nickel powder according to client's requirements. Product performance Nickel nanoparticles is a high-performance electrode materials in fuel cells which can replace the precious metals platinum, thus greatly reducing the cost of the fuel cell.
Purity:28% p2o5 50 kg bags
Sulphur, granular or lump 1 ton big bags, or bulk
Sulfur 99.98% Mass fraction of sulfii, o/o, not less than 99.98 Mass fraction of ash, not more than 0.02% Mass fraction of organic substances, not more than 0.01% Mass fraction of acids in terms of sulfuric acid, not more than 0.0015% Mass fraction of arsenic, not more than 0.0000% Mass fraction of selenium, not more than 0.000 Mass fraction of water, not more than 0.2
Silicone rubber profile and tubes in all sizes colours and grades.
Non-ferrous metals, silicon metal, manganese metal, manganese flake, manganese metal briquettes.
Silicon products, lanyard.
Silicone Products.
See the procedure, on request also yearly contract. Don't ask as samples to send. COMMODITY Product: Sulphur in grain Origin: Kazakhstan Quantity: 1 X 100â??000 MT Contract length: spot contract FOB Price: USD 150 per MT Payment: MT103 & Guarranttee Deposit Destination: CIF â?¦â?¦ Port Procedure 1. BUYER ISSUE ICPO + COMPANY PROFILE. ICPO MUST BE ON BUYERâ??S COMPANY LETTER HEAD, WITH PASSPORT COPY OF BUYER OR REPRESENTATIVE AND FULL BANKING INFORMATION. 2. SELLER ISSUE COMMERCIAL INVOICE FOR ONE TIME DELIVERY FOE BOTH PARTIES TO SIGN, SELLER ISSUES PARTIAL PROOF OF PRODUCT BUYER A. REFINERY COMMITMENT TO SUPPLY B. PRODUCT PASSPORT CERTIFICATE C. CERTIFICATE OF ORIGIN D. COMPANY CERTIFICATE E. PAYMENT INVOICE FOR GUARRANTEE DEPOSIT G. STATEMENT OF AVAILABILITY OF PRODUCT 4. WITHIN 7 BANKING DAYS, BUYERS MAKES PAYMENT OF GUARRANTTEE DEPOSIT. 5. SELLER AND BUYER SIGN THE CPA FOR LOGISTICS, AND SELLER MAKE PAYMENT FOR CPA 6. THE LOADING COMMENCE FOR UNWORD SHIPPEMENT TO BUYERS PORT. ALL SHIPPING DOCUMENT WILL BE FORWARDED TO BUYER. 6. ALL PARTIES FINALIZED THE SIGNING OF NCNDA / IMFPA 7. UPON ARRIVAL OF CARGO AT THE DISCHARGE PORT AND AFTER SGS OR Q&Q AT DISCHARGED PORT BUYERâ??S BANK RELEASE TO SELLERâ??S BANK PAYMENT BY MT103 /TT WITHIN 7 (SEVEN) BANKING DAYS. SELLER RELEASE PAYMENT TO ALL INTERMEDIARIES AS PER SIGNED NCNDA /IMFPA WITHIN 48 HRS OF RECEIVING THE PAYMENT FOR SHIPMENT VALUE FROM BUYERS BANK
Sulfur or sulphur (British English; see spelling below) is a chemical element with symbol S and atomic number 16. It is an abundant, multivalentnon-metal. Under normal conditions, sulfur atoms form cyclic octatomic molecules with chemical formula S8. Elemental sulfur is a bright yellowcrystalline solid when at room temperature. Chemically, sulfur can react as either an oxidant or reducing agent. It oxidizes most metals and severalnonmetals, including carbon, which leads to its negative charge in most organosulfur compounds, but it reduces several strong oxidants, such asoxygen and fluorine. Sulfur occurs naturally as the pure element (native sulfur) and as sulfide and sulfate minerals. Elemental sulfur crystals are commonly sought after by mineral collectors for their distinct, brightly colored polyhedron shapes. Being abundant in native form, sulfur was known in ancient times, mentioned for its uses in ancient India, ancient Greece, China and Egypt. Fumes from burning sulfur were used as fumigants, and sulfur-containing medicinal mixtures were used as balms and antiparasitics. Sulfur is referred to in the Bible as brimstone (burn stone) in English, with this name still used in several nonscientific tomes.[3] It was needed to make the best quality of black powder. In 1777, Antoine Lavoisier helped convince the scientific community that sulfur was a basic element, rather than a compound. Elemental sulfur was once extracted from salt domes where it sometimes occurs in nearly pure form, but this method has been obsolete since the late 20th century. Today, almost all elemental sulfur is produced as a byproduct of removing sulfur-containing contaminants from natural gas andpetroleum. The element's commercial uses are primarily in fertilizers, because of the relatively high requirement of plants for it, and in the manufacture of sulfuric acid, a primary industrial chemical. Other well-known uses for the element are in matches, insecticides and fungicides. Many sulfur compounds are odoriferous, and the smell of odorized natural gas, skunk scent, grapefruit, and garlic is due to sulfur compounds.Hydrogen sulfide produced by living organisms imparts the characteristic odor to rotting eggs and other biological processes.
We do supply products of high quality, meeting customers expectations and also as per clients requirements. Physical appearance: Granular deep, Yellow crystal or Pellets Assay: Double refined, 99.0% Ash/Residue on Ignition: 0.05% Iron mg/kg: 0.02% Heavy metals as Pb, As, Se, Te, etc.,: Nil Melting Point: 118 120 Deg
pure Granular Sulphur 99.9% CAS No.: 5656989 Place of Origin: India Grade Standard: Agriculture Grade, Electron Grade, Medicine Grade Purity: 100 Brand Name: 99.99% Granular Sulphur Model Number: 99.99% Granular Sulphur Product name: Methane Gas Package: Seamless Steel Cylinders Color: Bright Yellow Key words: Bottled Gas Item: Helium Gas Impurities: None
Quantity : 20,000- 20,000,000 METRIC TON per month. Delivery : CIF ASWP. CIF Price : $ 220 Gross / $ 200 Net Per Metric Ton. FOB : $ 200 Gross / $ 180 Net Per Metric Ton.
We Are A Supplier And Exporter Urea Granular And Pril Sulphur Granular With the best quality and the lowest price ORGIN: Uzbekistan DELIVERY:CIF PEYMENT: Through the bank
We are company based in Turkey and in Turkmenistan Urgen: We have available 40 000 mt high quality sulphur granule in Bandar Abbas port ready to ship. Looking for buyers
Sulfur lump from Refinery. Price: FOB: 100$/Tone If you have demand for sulfur lump with good quality ( 99.5% purity, from petroleum) and cheap price.
Innovative product. Perfectly balanced Nitrogen-Sulphur ratio. Efficient for most crops and for all soil types. Water-soluble sulphur improves commercial properties of yield (increases oil content in oil crops, as well as protein content in cereal crops) and contributes to better nitrogen uptake. Nitrogen in both ammoniacal and nitric forms at a ratio 18% and 12% allows to reduce nitrogen losses due to leaching and provides plant nutrition over a longer period of time*. Due to granulated form uniformly distributes on the soil surface during the broadcasting. Improves plant uptake of phosphates and contributes to extraction of phosphate deposits from the soil. Easy storage and application due to excellent physicochemical properties (does not cake, does not produce dust). Total nitrogen (N), % - 30 of which ammoniacal N, % - 18 nitric N, % - 12 Sulphates (on S basis), % - 7 Granulometric composition, % under 1 mm, max - 1 2â??5 mm, min - 95 over 6.3 mm - 0 Friability, % - 100 *In comparison with AN
We can offer a large volume of technical sulfur. Total sulfur content % 99.94
