APPLICATIONS A vented screw features a hollow core (has ahole drilled through it) and are speciallydesigned to allow the release of gases,contaminants, and pressure through thefastener. Vented Screws are widely usedwithin vacuum systems and enable faster, more efficient pump-down of HV, UHV, andEUV systems.
APPLICATIONS Hexagon flanged bolts are mainly usein automotive/plumbing applications. Hex FlangeBolts are typically used for automotive andconstruction applications. The flange directlyunderneath the hexagon-shaped head is designedto distribute the load and help protect the surfacebeneath and eliminates the potential need for awasher head
APPLICATIONS Thread rolling screws are designed for reliable and secure fastening into materials such as plastic. They have a tri-lobular lobed cross-section, and form threads in pre-existing holes by pushing material outward during installation
APPLICATIONS All-Metal Lock Nuts prevent againstloosening, providing resistance whentightened down on a bolt thread
APPLICATIONS Tee nuts can be used to fasten materials such as wood, plastic or composite material in such a manner that it will leave a flush surface. This makes it ideal for all sorts of assembly, including in the manufacture of some types of toys such as slides. The tee nut has a long body and a flange in one end. It is also used for particle or composite materials workpiece, leaving a flush surface.
APPLICATIONS Dome nuts cover the threaded end of afastener meaning that they are especiallysuitable for when a nut is used inapplications where the aesthetics matter. The domed head also acts as a shield fromany ends on fasteners that couldpotentially be dangerous such as sharpbolt threads
APPLICATIONS Spring washers are locking washers thatare used when there is a need toprevent a fastener from loosening as aresult of vibration. They are also oftencalled split lock or split ring washers.
APPLICATIONS Split washers can prevent bolts fromloosening due to vibrations. As a machineor piece of equipment vibrates, the split washer will push back into it. Split washersare ideal for applications involvingvibrations because they prevent the boltswith which they are used from loosening
APPLICATIONS An external tooth lock washer has teeththat extend radially outward to bite into thebearing surface. Like internal tooth lockwashers, they are designed to prevent anut or bolt head from loosening with thestrut action of the teeth. An external toothlock washer has teeth that extend radiallyoutward to bite into the bearing surface
These are components that are made to secure two or more surfaces together. They are most times accompanied by washers. They are used across different engineering applications which are namely: Materials such as Woodwork, Plastics and Metal, Rigging, Anchoring, Pushing, Hoisting, Machine, In-door and Out-door, Automotive, Medical, Military, Plumbing, Construction, Meteorology, Aerospace, Electronic Gadget and Devices, Shaft, Pipes and Hoses, Equipment Guards, applications respectively and a host of other uses. There are different classifications of Precision Components which range from the following namely: (1) LOW HEAD CAP SCREWS (2) COUNTERSUNK THREAD ROLLING SCREWS (3) METRIC COACH BOLTS (4) SELF DRILLING HEXAGON BOLTS (Sealing and Non-sealing types) (5) FULL THREAD CARRIAGE BOLTS (6) REDUCED SLOTTED PAN HEAD SCREWS (7) POZI RAISED COUNTERSUNK SEALING WOOD SCREWS (8) SECURITY 2 HOLE/SNAKE EYE PAN HEAD SCREWS (9) SLOTTED HIGH THUMB SCREWS - DIN 465 (10) KNURLED HIGH THUMB SCREWS - DIN 464 (11) KNURLED THIN THUMB SCREWS - DIN 653 (12) Ultra Low Head Socket Shoulder Screws (13) Pozi Countersunk Thread Rolling Screws (14) SELF TAPPING SECURITY 2HOLE SNAKE EYE PAN HEAD SCREWS (15) METRIC CAPHEAD CAPTIVE SCREWS (16) TORX ULTRA LOW CAP HEAD SCREWS (17) Slotted Round Head Screws (18) Security Torx Button Head Screws (19) SLOTTED PAN HEAD SHOULDER SCREWS (20) TORX PAN HEAD THREAD ROLLING SCREWS (21) COUNTERSUNK THREAD ROLLING SCREWS (22) TORX CAP SCREWS (23) BINDING PAN HEAD SCREWS (24) SOCKET CAP HEAD SEALING SCREWS (25) SLOTTED MUSHROOM SCREWS (26) PAN HEAD THREAD ROLLING SCREWS (27) VENTED SOCKET CAP HEAD SCREWS (28) SERRATED SOCKET CAP HEAD SCREWS (29) FLANGED HEXAGON BOLT (30) PAN HEAD THREAD ROLLING SCREWS (31) COUNTERSUNK THREAD ROLLING SCREWS (32) TORX COUNTERSUNK THREAD ROLLING SCREWS (33) METRIC PHILLIPS COUNTERSUNK SEALING SCREWS (34) SECURITY 2 HOLE/SNAKE EYE PAN HEAD SCREWS (35) COUNTERSUNK WOOD SCREWS (36) ULTRA LOW HEAD SOCKET SHOULDER SCREWS (37) TORX PAN HEAD SEALING SCREWS (38) CROSS-SLOTTED MUSHROOM HEAD SCREWS (39) SLOTTED MUSHROOM SCREWS (40) CAPSTAN SCREWS (41) TORX SHOULDER SCREWS (42) FILLISTER SCREWS (43) WING SCREWS (44) STRAIGHT WING NUTS (45) HEXAGON SEALING BOLTS (46) METRIC SLOTTED HEAD PART THREADED SET/GRUB SCREWS (47) EYE BOLTS
Nuts are mechanical fasteners with threaded holes. It is attached to a bolt, screw or stud to provide clamping force and prevent axial movement. For example a bolt is inserted through two parts with aligned holes and a nut is then screwed unto the bolt. Types of nuts we can design, manufacture and supply are the following listed below: (1) FLANGED LOCKING NUTS (2) CAGE NUTS (3) STEEL/BRONZE CYLINDERICAL TRAPEZOIDAL LEADSCREW NUTS (4) METRIC CYLINDRICAL CONNECTOR NUTS (5) SOCKET COUNTERSUNK BARREL NUTS (6) HEXAGON NYLON LOCKING NUTS (7) METAL LOCKING NUTS (8) STEEL CYLINDRICAL TRAPEZOIDAL LEADSCREW NUTS (9) CAP NUTS (10) METRIC HEXAGONAL STUD CONNECTOR NUTS (11) SLOTTED ROUND NUTS (12) PIPE NUTS (13) SHEAR NUTS (14) TEE NUTS (15) METRIC DOME NUTS (16) FLANGED TRAPEZOIDAL LEADSCREW NUTS
The primary purpose of most washers is to evenly distribute the load of the threaded fastener with which they are used. The washers we supply are the following: (1) BELLEVILLE WASHERS (2) CRINKLE WASHERS (3) DISC SPRINGS (4) FEMALE SPHERICAL SEAT WASHERS (5) MALE SPHERICAL SPRING WASHERS (6) IMPERIAL RECTANGULAR PROFILE SPRING WASHERS (7) METRIC RECTANGULAR PROFILE SPRING WASHERS (8) SEALING WASHERS (9) SPLIT SPRING WASHERS (10) SPRING WASHERS (11) SQUARE PROFILE SPRING WASHERS (12) SQUARE TAPPER WASHER FOR U SECTIONS (13) SHOULDER WASHERS (14) EXTERNAL LOCKING WASHERS
APPLICATIONS The thumb screws are popularly usedon: Safety covers for electronic gadgets. Battery covers of small electronic devices
METRIC ULTRA LOW HEAD SOCKET SHOULDER SCREWS APPLICATIONS What are shoulder screws used for? Muchlike all other screws, shoulder screws aremeant to hold objects together and in aparticular position. However, these screwsare designed for use in parts which requiresa mounting pin, joint, shaft, dowel, pivot, orsliding motion
STAINLESS STEEL (A2) APPLICATIONS Screw threads have several applications: Fastening: Fasteners such as wood screws, plastic screws, machine screws, nuts, and bolts. Connecting threaded pipes and hoses to each other and to caps and fixtures
APPLICATIONS They are used in military applications, tobuild and secure medical equipment andeven in marine hulls. They are also used invalves, electronic devices & panels, fuel tanks, food processing equipment, consumer products and more. The Socket Cap Seal Screw is safe, high quality and reliable.
APPLICATIONS Socket head cap screws are widely usedin industrial production and assembly lines,including in the automotive sector, machinetooling applications and steel fabrication. Sockethead cap screws are typically used in machineparts, die fixturing, and clamping. Socket head capscrews are ideal for applications in which there isnot enough space to maneuver wrenches orsockets.
APPLICATIONS Thread rolling screws are designed forreliable and secure fastening intomaterials such as plastic. They have atrilobular lobed cross-section, and formthreads in pre-existing holes by pushingmaterial outward during installation
SECURITY 2 HOLE/SNAKE EYE PAN HEAD SCREWS APPLICATIONS These versatile security screws areideal for a wide range of applicationsand are often used to secure glasspanels and sign-age in place in bothindoor and outdoor locations
APPLICATIONS Mushroom Head Screws are wide headed, lower profile screws with a traditional slot drive. Theyare used for bolting softer materials and areusually manufactured with a full thread. Theseheads, which have a slight circular shape wherethe slots cross, provide a larger mating surfacebetween the screw and the screwdriver
