Cisco WS-C3850-48W-S is the Cisco Catalyst 3850 48-port PoE IP Base switch with 5-access point license. Cisco Catalyst 3850 Series provides capabilities that ideally suited to support the convergence of wired and wireless access. The new Cisco Unified Access Dataâ?¢ Plane (UADP) Application-Specific Integrated Circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility, and application optimization. This convergence is built on the resilience of the new and improved Cisco StackWise-480 technology.
The Cisco Catalyst 3650 series is the enterprise-class standalone and stackable access-layer switch that provides the foundation for full convergence between wired and wireless on a single platform. The Cisco Catalyst 3650 is built on the advanced Cisco StackWise-160, and takes advantage of the Cisco Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The Cisco Catalyst 3650 series switch supports full IEEE 802.3at Power over Ethernet Plus (PoE+), and offers modular and field-replaceable redundant fans and power supplies. It can help you increase wireless productivity and reduce your TCO.
C9200-48T-E is the Catalyst 9200 48-port Data Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise it is secure, always on, and IT simplified.
The Cisco Catalyst 9300 Series Switches are Ciscoâ??s lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. C9300-48T-E is 48-port data only, Network Essentials Switch of 9300 series. Catalyst 9300 Series are the next generation of the industryâ??s most widely deployed switching platform. At 480 Gbps, they are the industryâ??s highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch.
Cisco Catalyst WS-C3650-24PWS-S is the next generation enterprise-level standalone with stackable option switch with IP Base image. WS-C3650-24PWS-S has 24 Gigabit Ethernet POE+ ports with 4 fixed 1G SFP uplink ports and provides 5 access point licenses supporting up to 200 wireless connections
ESP8266EX 32bit TCP IP WIFI to UART Wireless Module esp8266 Low Power Networking WIFI Module ESP [IC] ESP8266 [Frequency]ï¼?2.4GHz [Distance]ï¼?300m [Interface]ï¼?UART/HSPI/I2C/I2S/IR Remote Control [Introduction]ï¼?ESP-WROOM-02D and ESP-WROOM-02U are ESP8266EX-based modules developed by Espressif. Compared to ESP-WROOM-02, the RF performance of ESP-WROOM-02D and ESP-WROOM-02U are optimized. Besides, ESP-WROOM-02U integrates a U.FL connector. Please see Chapter 8 for details of U.FL connector
Specification of FL net interface moudel qj71fl71-t-f01: 1. Transmission instructions [data transfer speed] 100base-tx: 100Mbps (full duplex / half duplex) 10Base-T: 10Mbps (half duplex) [transmission mode] baseband [electronic interface] IEEE802 3 standard (CSMA / CD standard) [Transport Protocol] UDP / IP FA link protocol [maximum section length] 100m [maximum number of stations in the system] 254 [maximum number of sites] 254 modules / all internal address blocks [minimum station spacing] 2.5m [cyclic data amount] maximum (8K bits + 8K words) / system, maximum (8K bits + 8K words) / station [information data capacity] 1024 bytes maximum 2. Link data description [public storage area] area 1 (bit area) 8K / bit area 2 (word area) 8K words [virtual address space and physical memory] none [error record storage area] 512 words [status storage area] bit area 2K / bit word area 2K [local station network parameter setting area] 96 words [network parameter setting area of other stations] 2048 words [network parameter acquisition area] 512 words [soft component storage area] 512 words [information area (instantaneous area)] 1024 bytes * 2 at most (transmit receive each) 3. Transmission instructions [information transmission] 500ms or less (1:1 one-way information arrival time)
Factory OEM WDM / BIDI / Simplex Duplex MM SM LC / SC 1.25G SFP Transceiver Optical Module 1.25G SFP 1310nm 10-40KM LC
48*10/100/1000M+4*10G SFP Port+1*Console+1*USB Ports Managed Network switch Communication Mode: Full-Duplex & Half-Duplex Ethernet Ports: 48*10/100/1000Mbps RJ45 Ports Uplink Ports:4*1G/10G SFP+ Slots Power Supply:AC 100-240V Uplink Ports:4*1G/10G SFP+ Slots Packaging Details 1pcs/Inner Box 5box/Carton"
Transmission Rate: 10/100/1000Mbps Ethernet Ports:8* 10/100/1000Mbps RJ45 Ports Communication Mode:Full-Duplex & Half-Duplex Uplink Ports:1*1000Mbps SFP Slots Network Protocols:IEEE 802.3af/at Packaging Details: 1pcs/Inner Box 20box/Carton"
PUMAI are very professional manufacture of fiber optics transceiver , the core components all is use American , Japan,Korea known brands product , we keep the consitant of High quality ,Fast production delivery process, Timely response , PISMAI is worthy of your first choice . 10G Dual fiber SFP+ optic transceiver 10G BIDI SFP+ optic transceiver 40G Dual fiber SFP+ optic transceiver 40G BD SR optic transceiver 100G LR ER ZR optic transceiver 10G 40G 100G AOC optic transceiver 10G 40G 100GDAC optic transceiver
The TMF20 is a FAP20 optical fingerprint scanner that is housed in a durable and compact casing. Supports Windows, Linux and Android operating systems. Powered by USB 2.0/3.0, allows for easy integration with new or existing applications. The durable and lightweight design allows the TMF20 to be portable without compromising image quality, it is ideal for biometric authentication and individual identity verification. Functionalities: * Lightweight and durable design * Captures high-quality fingerprint images * FAP20 - Large active platen area * Embedded FMR extractor and matcher * Encrypted USB communication * Secure boot with RSA signature verification * Finger capture and extraction module in TEE (Trusted Execution Environment) * Secure processor with hardware RSA keystore, Signing, RSA-2048, AES-256, SHA-256, TRNG * Live Finger Detection Through AI Based Application Resolution 500 ppi Active Platen Area 15.24x20.32mm Gray scale 8-bit, 256 levels Interface/Power USB 2.0/3.0, Data and power Operating Temperature 0�° to 55�° C Storage Temperature -10�° to 60�° C Humidity 10-90%, non-condensing Weight: 60 gm Dimensions: 58x38x27mm System Requirement Windows 7 /8/10, Linux, Android Certificate STQC, Registered Device Level 0, FBI-PIV ,FCC, CE, ROHS IP Rating IP 54
10G SFP+ TO SFP+ DAC Series Product Model: ESDPX-330CNxx Data Rate: 10G Fiber Type: 30~24#Cable Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Support multi-gigabit data rates up to 10.5Gbps 2.Support 1x, 2x, 4x and 8x Fiber Channel data rates 3.Hot-pluggable SFP 20PIN footprint 4.Serial ID module on MOD(0-2) 5.AC coupling of PECL signals 6.EMI/EMC performance 7.Low Power Consumption < 0.5W 8.Power Supply :+3.3V 9.Compliant to SFP+ MSA 10.Temperature Range: 0~ 70 �°C 11.ROHS Compliance. Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
Moisture-wicking fabric treatment keeps you cool and dry. Spandex / Polyester, Elasticated Waistband (Also Available In Required Material)
100g qsfp28 zr4 Guanglianâ??s 100G QSFP28-ZR4 Optical Transceiver Module is designed for use in 100GBASE Ethernet and 4x28G OTN client interfaces throughput up to 80km over single mode fiber (SMF) with duplex LC connectors. Taking EML TOSA+ SOA+PIN+ROSA+PCBA separate design, it has great reliability, airtightness and heat dissipation performance. This transceiver is compliant with IEEE 802.3ba 100GBASE-ZR4 and OTU4 4I1-9D1F standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. It is suitable to be used in various applications, such as 100G Ethernet, 112G OTN OTU4, telecom, access network, data center interconnection, and 5G wireless network. 100g qsfp28 zr4 Features BOX (EML TOSA+SOA+PIN ROSA) packaging technology Support both 103.1Gbps and 112Gbps aggregate bit rate 4 x 28G DFB-based LAN-WDM DML transmitter 4 x 28G electrical interface Up to reach 80km with FEC on SMF 3.3V power supply voltage Power dissipation â?¤6W Operating Case Temperature: 0~70â?? Duplex LC connector 100g qsfp28 zr4 Application 100GBASE-ZR4 Ethernet Access Network Telecom Network Data Center Interconnection(DCI)
200g qsfp56 Guanglians 200GBASE-SR4 optical transceiver module supports link lengths of up to 100m over multimode fiber (MMF) with MTP/MPO-16 connector. It is compliant to IEEE 802. 3bs and QSFP56 MSA standards. The 200 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and de-multiplexing of the eight wavelengths are managed within the device. It is suitable to be used in various applications, such as data centers, high-performance computing networks, proprietary Interconnections etc. 200g qsfp56 Product Features COB (Chip on Board) packaging technology Supports 200Gbps aggregate bit Low Power Dissipation, Max 4.0W Each End Up to 70m transmission with OM3 multi- mode fiber Up to 100m transmission with OM4 multi- mode fiber 850nm VCSEL/PIN photo detector Operating Case Temperature: 0~70 200g qsfp56 Application 200GBASE-SR4 Ethernet Data Center HPC Interconnects Proprietary Interconnections
Product overview The 400G QSFP-DD module (400GBASE Quad Small Form-Factor Pluggable Double Density) is a new generation of 400G transceiver module based on the QSFP-DD form factor. It is a high-density, high-speed pluggable module with an additional row of contacts. It can provide eight channels of electrical interfaces, and the QSFP-DD module series provide the industry's highest bandwidth density. Features and benefits of 400G QSFP-DD Modules 1. Support hot swap Input/output devices plugged into 400G Ethernet Cisco QSFP ports 2. Interoperability Interoperable with other IEEE standard 400GBASE interfaces when applicable 3. Cisco platform certification Qualified and tested on QSFP-DD 400G port and obtained Cisco platform certification 4. Comply with IEEE 802.3bs It is compliant to IEEE 802.3bs protocol and 400GAUI-8/CEI-56G-VSR-PAM4 standard. 5. Comply with QSFP-DD MSA standard The collaboration of MSA will make the implementation and operation of the QSFP-DD pluggable interface in network equipment faster 6. Ultrahigh speed PAM4 modulation that supports speeds up to 400G runs at a speed of 50 Gbps. 7. Backward compatibility Backward compatible with low-speed QSFP (QSFP+ and QSFP28) pluggable modules and cables, designed for high-speed optical network applications. Application and market of 400G QSFP DD Guanglianâ??s 400G QSFP-DD product portfolio provides customers with a variety of ultra-high-density transceiver modules and the flexibility of 400 Gigabit Ethernet connection options. 400G is one of the highest data rates in the Ethernet world, providing critical aggregation and high bandwidth Interconnect applications provide improved functions. Therefore, 400G QSFP-DD is currently the most widely used fiber optic transceiversmodules in this series. The main applications are 400G Ethernet, ultra-large-scale data centers, high-performance computing networks, cloud networks, enterprise core and Distribution layer, Internet exchange, managed services, wireless infrastructure core, service provider and operator core network, and video distribution infrastructure. Technical advantages of 400G QSFP DD As a professional fiber optic transceivers manufacturer and supplier, Guanglian provides a comprehensive 400G QSFP-DD optical transceiver product portfolio. Our compatible QSFP-DD product portfolio includes transceivers that can operate on single-mode or multi-mode optical fibers. A connection distance of a few meters to 40 kilometers, and can support data rates up to 425 Gbps and 400G Ethernet applications.
40G QSFP+ SR4 100M MPO Optical Transceiver Product Model:EQ854X-3MCD01 Data Rate:40G Wavelength:850nm Distance:100m Connector:QSFP+ Fiber Type:MM DDM:Yes Place of origin: Made in China Shipping Port: ShenZhen Package type: 10PCS/Tray Features 1.High Channel Capacity: 40 Gbps per module 2.Up to 11.1Gbps Data rate per channel 3.Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber 4.High Reliability 850nm VCSEL technology 5.Electrically hot-pluggable 6.Digital diagnostic SFF-8436 compliant 7.Case operating temperature range:0 C to 70C 8.Power dissipation < 1.5 W Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
Description This 3G-SDI fiber optic extender has LEMO compatible 3K.93C SMPTE311M/SMPTE304M connector. It could use FUW-PUW assembly HDTV hybrid fiber cable to transmit 16 channels of SDI camera signal and Ethernet network to remote area like OB VA. This SMPTE fiber converter could be up to 2KM over SMPTE cable and 20KM over PUW/PUW to LC/SC/ST/FC pure fiber optic cable. Our Our SDI optical network gears have been widely used in our domestic and overseas for broadcast TV transmission system. We could do SDI extender over fiber by CWDM, DWDM and TDM uncompressed solution with data, external audio Ethernet, tally and other functions. The fiber connectors could be ST, FC, SC, LC, SMPTE, LEMO type. We welcome any OEM request for SDI over fiber series. Features 1. 8-ch bidirectional 3G-SDI/ASI video with embedded audio and 1000M/100M Ethernet 2. Compatible with HD-SDI, SD-SDI, DVB-AST, could OEM 12G-SDI or 6G-SDI 3. Bandwidth range from 19.4Mb/s to 2.97Gb/s 4. SMPTE 424M (2.97Gb/s) clock recovery 5. support all popular standards for digital video transport such as SMPTE 424M, SMPTE 292M, and SMPTE 259M, SMPTE 297M working at 3G-SDI, HD-SDI, SD-SDI, ASI respectively 6. Built-in CWDM system, SFP modules for each path, SMPTE311/304M 3K.93C connector for fiber optic 7. Support automatic cable equalization based on the data rate detected 8. Support remote power supply from receiver to transmitter. Receiver has self-detect for protection 9. We could make it as your requested specifications
100G QSFP28 to 2x 50G QSFP28 Copper Breakout Cable Product Model:EQ2DP10X-34S2CNxx Data Rate:100G Wavelength:--- Distance:Customizable Connector:QSFP28 Fiber Type:SM DDM:None Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package Features 1.Compliant with IEEE 802.3bj/Compliant with SFF-8665 2.Up to 100Gb/s data rates/Ultra low crosstalk for improved performance 3.Low insertion loss/BER better than 10-15 4.Serial numbers printed on each end 5.Tested in an end-to-end system 6.RoHS compliant Description ETU-LINK EQ2DP10X-32Q2CNxx provides robust connections for leading edge100Gb/s systems. Passive copper cables require no additional power to ensure quality connectivity. The100Gb/s passive copper cables are fully compliant with SFF-8436 specification and provide connectivity between devices using QSFP28 ports. ETU-LINKâ??s CAB-ZQP/2ZQP-PXM fills the need for short, cost-effective connectivity in the data center. Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
