High availability, converged network services for Enterprise Distribution/Core or Service Provider networks. We have large real stock of new and refurbished or used Cisco equipment and other network equipment. including Cisco routers, Cisco switches, Cisco firewalls, IP Phone, GBICs, GLCs, WIC NM network modules, memory & flash, cables, and network kits.
Model: S251 Name: GSM 3G Power Distribution Monitoring System The GSM 3G Power Distribution Monitoring System is not only a smart power meter for measuring the power distributor voltage, current, factor, watts, frequency, active power, reactive power, when over current or exceed the pre-set value, will alarm immediately. The GSM 3G Power Distribution Monitoring System can be used for monitoring the oil temperature, oil level of the transformers. GSM 3G Wireless Power Line monitoring. The GSM 3G Power Distribution Monitoring System also can be used as a wireless security alarm system for the transformers, e.g.: theft-proof, fall down, and so on. 1. ARM® Cortex™-M4 32 Bit RISC Core, 72MHz inside, RTOS system; 2. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 3. Programmable by SMS Commands or PC Configurator via USB; 4. A/B/C phase power up it directly, Inbuilt large capacity rechargeable backup battery; 5. Suitable for three-phase four-wire system, input voltage: 100~400V, input current:0~5A; 6. Monitoring A/B/C 3 Phase input over current, over voltage , factor, watts, active power, reactive power exceeds alarm; 7. Power input PT,CT rate are programmable; 8. Accuracy of current, voltage is 0.2 class, power and watts is 0.5 class, sampling is 0.1seond. 9. Large internal memory can save 1000 event historical data; 10. 6 analog inputs, 16bits, supports 0-5V, 0-20mA, 4-20mA; 11. 2 digital outputs, 5A/30VDC,5A/250VAC, can be program to events or turn on/off by SMS; 12. 8 digital inputs, NC/NO/EOL type, when digital input recover can alert by SMS; 13. I/O ports with opto-isolated and lightning protection; 14. Provide one 5VDC@1A power for additional device; 15. Equips LCD to display the real time data and for programming; 16. 2 IP data centers, supports GDW 376.1—2009 protocol over GPRS/3G network; 17. 1 RS485 can be used as data transparent transmission for additional intelligent meters or PLC, with 15KV ESD protection; 18. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 19. 8 SMS Alert and auto dial numbers, can program to receive specified alarm message. 20. Automatically report its status to users by the specified time.
Model: S260 S261 Name: GSM GPRS 3G Temperature Logger The GSM GPRS 3G Temperature Logger is special for remote monitoring temperature. it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. 1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2. Programmable by SMS Commands or PC Configurator via USB; 3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6. Daily report, schedule upload, event upload; 7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10. Internal memory, can save the historical data for review; 11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12. Rechargeable Backup Battery inside can last 18hours; 13. Standard DIN Rail 35mm installation or outdoor enclosure.
Model: S262 S263 Name: GSM GPRS 3G Data Logger The GPRS 3G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-high—high, low—ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. 1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2. Programmable by SMS Commands or PC Configurator via USB; 3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6. Daily report, schedule upload, event upload; 7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10. Internal memory, can save the historical data for review; 11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12. Rechargeable Backup Battery inside can last 18hours; 13. Standard DIN Rail 35mm installation or outdoor enclosure.
Model:S270 Name:GSM GPRS Remote Controller The GSM M2M RTU S270 is a remote terminal unit, special for remote monitoring and remote control. The RTU integrated industrial GPRS Module inside, it supports voice, SMS, and GPRS communications. Moreover, it integrated USB port for programming by user friendly PC software and upgrade firmware. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. Large internal memory for save 1000 historical data, USB port for configuration and upgrade firmware; 4. 2 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 2 Relay outputs, 5A/30VDC,5A/250VAC; 6. 2 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 9. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 10. Supports remotely restart the RTU, and configure it by SMS commands remotely; 11. Supports over voltage protection and phase-reversal protection; 12. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 13. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Model:S273 Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers) The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. 4G SD card for save historical data, USB port for configuration and upgrade firmware; 4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 8 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection; 9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert; 11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC; 12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 13. Supports remotely restart the RTU, and configure it by SMS commands remotely; 14. Supports over voltage protection and phase-reversal protection; 15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
Features Support USB3.0 Support 20MHz/40MHz/80MHz frequency 5G compatible with IEEE 802.11ac and IEEE 802.11a standard 2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11g standard Detect the network and change transmit speed automatically Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption Support WPS 2.0 Internal Omni-directional Antenna Support 2.4G and 5G dual band Support Wi-Fi Direct Support Multiple BSSID Support QoS-WMM, WMM-PS Support WPS: PIN, PBC Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes Support Cisco CCX Low consumption management Supported OS: Window XP/Vista/Win7/Win8/Win8.1/Mac OS 10.10/Linux v3.0.0.1
T-Bridge stands for "Telephone Line Communication", Which enables high speed data transmission through telephone cables. Besides Telephone cables, any types of copper cables such as coaxial cables, speaker cables, and UTP cables can be applied. T-bridge can save network construction cost dramatically as it can utilize existing copper cables already wired.
Network equipment
Jaton Technology Limited is a professional engaged in mobile broadband communications equipment research and manufacturing of high-tech companies.Currently such terminal products as TD-LTE data module, FDD data module,WiMAX data module,indoor CPE, outdoor CPE , LTE base station and MIFI have already come into market.We are now providing not only general but also customized products and solutions for our customers. 1kg/pcs
JN6610 LTE Indoor CPE(Band31) Support VOIP function to meet the needs of overseas operators Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands support standard mini-PCIe modules from partners Support internal or external antenna Simple, elegant and suitable for multiple locations Support PoE power supply to ODU, ODU+IDU total solution has the cost advantage 1kg/pcs
JN6100 is a powerful indoor CPE, with built-in Mini-PCIe interface inside. Support LTE modules both TDD and FDD, or multi-mode wireless access with various of modules. Support VOIP function to meet the needs of overseas operators Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands support standard mini-PCIe modules from partners Support internal or external antenna Simple, elegant and suitable for multiple locations Support PoE power supply to ODU, ODU+IDU total solution has the cost advantage 1kg/pcs
JW0100 Product Feature Single-chip solution with low cost advantage Total industrial level devices Support TR-069 and OMA-DM network management protocols Support VPN protocols including PPTP, L2tp and Ipsec Can be adapted to LTE modules in different frequency bands; support Wimax/LTE dual-mode; support standard mini-PCIe modules from partners Built-in high gain dual-polarized directional antenna with the gain up to 10dBi or more, Support long-distance transmission between the base station POE power supply and easy to install Adapt to harsh outdoor environments, extreme high and low temperature, high UV radiation, Lifetime is more than 10 years IP65 class protection 1KG/PCS
EMS solution monitors the status of server by using TCP/IP, SNMP, and ICMP protocols and by installing three applications (EMS agent, EMS server, and EMS monitoring) as well as sends an alarm by means of mail, SMS, and monitoring message according to user definitions in order to respond to server errors in a prompt manner. The solution aims at integrated management of various call center systems and network devices. These results re-gather their feedback on the target value is more accurate and valid gapeurosseo is utilized.
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: LTE: 24dBm 3.84dB, CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
Module: Mobileeco ME-C21G (MDM9215/WTR1605L/PM8018) External Access: LTE/DC-HSPA+/HSUPA/HSDPA/WCDMA Air standard: LTE Release9, WCDMA Rel'99+/HSDPA Rel 5 Max output power: LTE: 23dBm 2.7dB RF technology: zero intermediate frequency Power: 5VDC +/- 10% Bettery: Li-ion 3.7V 2800mAh
Chipset: Qualcomm MDM9615 Max output power: WCDMA: 24dBm 3.84dB CDMA: > +23dBm 3G/4G Standard: FDD LTE Release9, WCDMA Rel'99+ Band: B12 700MHz, GSM 850/1900 Power: AC Adapter 5.0VDC Max Current Consumption: Under 700mA@LTE 22dBm cat4 10MHz BW
Mtoken k5-b, also called mtoken bluetooth, is a smart card based wireless device which is independent from pc connections. K5-b is designed especially for wireless terminal such as mobile¡¢pc¡¢embedded platform to ensure secure network authentication and communication encryption. It supports both usb and wireless communication type. Meanwhile, mtoken k5-b fits cross platform standard interfaces of international standard, so it can support windows, linux, android, ios and mobile terminal pki application such as email encryption¡¢digital signature¡¢security certificate¡¢vpn¡¢ssl .Etc. As k5-b supports bluetooth interface, so it needs no wires and supports short distance wireless communication. Compared with the traditional usb device, k5-b supports usb and bluetooth communication, suitable for pc application and mobile wireless application, platform unlimited .Etc. If you are searching for this kind product, please take k5-b as the needed solution, it may match your requirement. 56mm*17mm*8mm
