Serial RS232 RS485 RS422 Ethernet converter: USR-TCP232-306 is a multi serial port ethernet converter,which can realize bi-directional transparent transmission between RS232/RS485/RS422 and Ethernet. User can directly process data interaction through network and device to realize remote data acquisition, remote control and management.
Features of Serial RS232 RS485 RS422 Ethernet converter
Auto-MDI/MDIX, RJ45 port with 10/100Mbps
Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client
Baud rate of serial port can be configured from 600 bps to 230.4 Kbps, supports check bit of none, odd, even, mark and space
Heartbeat package mechanism to ensure connection is reliable, put an end to dead link
User-defined registration package mechanism, check connection status and use as custom packet header
Supports RS232/RS485/RS422 port ( Canot be used at one time)
Under TCP Server Mode, the connection number with client can be randomly set from 1 to 16, default number is 4. IP has been connected can be shown according to connectiong
with calculating send / recceive dat.
When connection number reaches a maximun, the new connection is kicked off the old one can be configured by user
Parameters can be configured by built-in webpage, AT command, serial port procotol and network procotol. Setting procotol is avaliable to integrate into users software.
Supports TCP client short connection function, user-defined the disconnected time.
Device restart if no data transmission or timeout. User-defined the restart time.
If data buffer needs to clear configuration before TCP connection establishment
Supports DHCP, automatically obtain an IP address and query IP address via serial setting protocol.
The global unique MAC address, user-defined MAC address
DNS function
DNS server addres can be defined
Firmware can be upgraded by network
Provide Virtual com software
Restore factory setting through software or hardware
Running across the gateway, switches or routers.
Can work in LAN, also can work in the Internet
Application Field of Serial RS232 RS485 RS422 Ethernet Converter
Industrial data transmission, industrial automation
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
USR-G800 is a 4G wireless router, which provides a solution for userâ??s device to access 4G network. USR-G800 is based on industrial high-performance embedded structure. It plays an important role in data transmission fields such as smart home, smart grid, personal healthcare and industrial control. USR-G800 has one WAN port and four LAN ports, and it supports data transparent transmission between RS232 and 4G network.
Features of Industrial 4G Routers
4 LAN ports and 1 WAN port
Support WiFi network
Support 4G module with Mini-PCIE interface
Multiple indicator lights
Data transparent transmission between RS232 and 4G network
Support Web setting
A key to restore factory settings
Both LAN port and WAN port with a rate of 10/100Mbps
4G card slot: self-locking type card slot; usim card, APN card and IOT card are available, support APN private network setting, can set priority network, when there are both wired network and 4G
RS232: four transmission protocols of TCP Server, TCP Client, UDP Server and UDP Client; realize transparent data transmission, AT command control
LED light: All eight LED lights indicate the running state of LAN port, WAN port, 4G network and wifi network
1 WAN port: support DHCP, static IP, ADSL(PPPoE) dialing and VPN virtual private network
4 LAN ports: support DHCP and static IP
Power: DC9 to 16V power supply and terminal power supply
Reload key: a key to restore factory settings
7 Ports USB 3.1 Type-C to USB 3.0/3.1 Hub with 5V 4A Adapter
-Apple-style aluminum finish creates a natural extension to your Mac computer.
-Type-C Compatible, works with the latest computers and smart devices with Type--C ports
-7 downstream ports support data transfer rates up to 5Gbps for your flash memory, SSD, 2.5"/3.5" mobile hard disk drive, Camera etc.,you'll be able to transfer a HD movie in seconds.Also backwards compatibility with USB 2.0 / 1.1.
-Features the sleek yet durable apple-style aluminum fineness, which eff Type C adapter Works well with the latest 2015 new Mac book,Nokia N1, ChromeBook Pixel and other USB C Devices.
Simplistic. Speedy. Expansive:
1. This attractive aluminum 7 port USB 3.0 hub offers a fast and simple connectivity solution for your PCs mobile devices with the most advanced USB standard currently available on the market.
2. It is designed to achieve maximum throughput, whether its connected to a Super speed USB 3.0 device with date transfer rates of 5Gbps or a High speed USB 2.0 device with rates of up to 480Mbps.
Simplicity and Apple-style design:
Solid aluminum alloy body with rounded corners, eye-catch Apple-style design, perfectly complements your Mac and other Apple-style desktop or laptop.
Compatible:
1. Supports Microsoft Windows XP/Vista/7/8 or later & MAC OS X /Linux, Mac OS X Lion 10.7.4 users should upgrade to Mountain Lion 10.8.2 or later to avoid unstable connections.
2. Backward compatible with USB 3.0/ USB 2.0
3. Super speed and leading USB 3.1 Gen 1 interface
Compact & Portable size:
Plug and play, working on-the-go, with the palm-size and lightweight design
Safety:
Built-in surge protection keeps your devices and data safe, and it supports hot swapping, slef-powered properties
Please Note:
1, please update your usb 3.1 firmware before using the device.
2, 2.4Ghz wireless devices, such as wireless keyboard and mouse adapters, may not work in close proximity to USB 3.0 devices or hubs. Connecting to a USB 2.0 port is recommended.
For a stable connection, the devices connected to the 7-Port USB 3.0 Hub must not exceed a combined current of 5 volts 900 mAh. External hard-drives should be connected to an external power source, this 7-Port USB 3.0 Hub will not charge an iPad (it will only sync)
The RS232 to Ethernet Converters, used for data transparent transmission. USR-TCP232-302 is a low-cost serial device server,whose function is to realize bidirectional transparent transmission between RS232 and Ethernet. USR-TCP232-302 is internally integrated with TCP/IP protocol. User can apply it to device networking communication.
Features of RS232 to Ethernet Converters
Support DHCP, automatically obtain an IP address and query IP address through serial setting protocol
Support DNS function
Set parameters through webpage
Upgrade firmware via network
Auto-MDI/MDIX, RJ45 port with 10/100Mbps
Serial port baud rate from 600 bps to 230.4 Kbps, Check bit of None, Odd, Even, Mark and Space
Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client
Support virtual serial port and provide corresponding software USR-VCOM
Heartbeat package mechanism to ensure connection is reliable, put an end to dead link
User-defined registration package mechanism, check connection status and use as custom packet header
Under TCP Server mode, Client number ranges from 1 to 16; default number is 4
The global unique MAC address bought from IEEE, user can define MAC address
Restore factory default
Across the gateway, switches, routers
Can work in LAN, also can work in the Internet (external network)
Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS
Support customization
Application Field of RS232 to Ethernet Converters
Industrial data transmission, industrial automation
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
USR-N520 is a double serial ethernet converter, which can realize transparent transmission between TCP/UDP data package and RS232/RS485/RS422 interface. User can easily realize embedded device networking.
ndustrial Solution TI Cortex M4 Solution, -40~85C
Web Server Web socket/ Web to Serial
Modbus Gateway Modbus RTU to Modbus TCP / Modbus Pollinig
Flow Control CTS/RTS, XON/XOFF
Protection Watchdog circuit, never cash
ESD 8KV
Anti-surge
Network Network Printing
2 network links, each serial support sending data to two servers
Features of 2 ports RS232 RS485 RS422 Ethernet Converter
Cortex-M4 kernel,industrial working temperature range and TCPIP protocol stack.
Auto-MDI/MDIX,RJ45 port with 10/100Mbps
TCP Server,TCP Client,UDP Client,UDP Server and HTTPD Client work mode
Support network printing
Support Modbus multi-host polling
Two ports can work independently at the same time
Support Modbus RTU to Modbus TCP
Can distinguish which serial port connects to the device via port number
Support virtual serial port and provide corresponding software USR-VCOM
Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space
DNS and DHCP supported
Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS
Built-in webpage;also can customize webpage for users
Reload button,one key to restore default settings
RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation
The global unique MAC address bought from IEEE (begin with D8-B0-4C);user can define MAC address
Support upgrade firmware via network
Support keepalive,rapidly detect dead links
Support account and password,can be used to page login and network settings
Support one channel Websocket,realize bidirectional transparent transmission between webpage and serial 0
Two serial ports;each serial can work as rs232,rs485 or rs422;DB9 female;provide rs485/rs422 converter
Two channel serial communication indicator: TX/RX
Support DC adapter and 5.08-2 terminal power supply
Support UDP broadcast function
Simple Transparent transmission of RS232 RS485 RS422 Ethernet Converter
Transparent transmission means that whatever is transferred, our device plays the role of a channel and sends data to the target without modification. On-site monitoring equipment sends data to Serial Device Servers transparent data transmission terminal by itself port, the terminal CUP receives data by serial port and package data.
Various parameter setting method of RS232 RS485 RS422 Ethernet Converter
Software Settings
Download settings software, search related Serial Device Servers in the LAN through the serial port server IP, name, MAC address, or the version number. Then set the parameters you need, otherwise keep the default
2923 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
USR-TCP232-419 is DTR/DSR Serial Ethernet converter, ethernet to serial converter with modbus RTU function
Character for DTR/DSR Serial Ethernet Converter
M4 Series Feature
Industrial Solution TI Cortex M4 Solution, work temp at -40~85C
Work Mode TCP Server/ TCP client/ UDP Server/UDP Client/ HTTPD Client
Advanced Character -Modify MAC
-Network Printing
-Web Server: Web socket, Web to Serial
Flow Control Software: XON/XOFF
Serial Signal RS232: TX/RX, CTS/RTS, DTR/DSR
RS485:A/B/G
Serial Port RS232/RS485
Modbus Gateway Modbus TCP to Modbus RTU in bi-directional Modbus Polling
Power Supply DC/Terminal type 5V~36V
Protect Surge Protection, ESD 2KV, for more harsh industrial environment
Built-in web page Customized web page is acceptable
Certification CE/FCC/RoHs/WEEE
Industrial data transmission, industrial automationDTR/DSR Serial Ethernet Converter Application Field
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
All USR products will be tested by R&D first, then production test again.(ESD Test,Surge/EFT Test, High/Low Temperature Test, EMC and LVD environment reliability test, etc.)
USR-N540, 4 serial port Ethernet converter which can realize transparent transmission between TCP/UDP data package and RS232/RS485/RS422 interface.
Industrial Solution TI Cortex M4 Solution, -40~85C
Web Server Web socket/ Web to Serial
Modbus Gateway Modbus RTU to Modbus TCP / Modbus Pollinig
Flow Control CTS/RTS, XON/XOFF
Protection Watchdog circuit, never cash
ESD 8KV
Anti-surge
Network Network Printing
2 network links, each serial support sending data to two servers
Feature of 4 ports Serial Ethernet Converter
TI Cortex-M4 kernel,industrial working temperature range and TCPIP protocol stack.
Auto-MDI/MDIX,RJ45 port with 10/100Mbps
TCP Server,TCP Client,UDP Client,UDP Server and HTTPD Client work mode
4 ports can work independently at the same time
Can distinguish which serial port connects to the device via port number
Support virtual serial port and provide corresponding software USR-VCOM
Serial baud rate from 600bps to 230.4K bps
DNS and DHCP supported
Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS
Built-in webpage;also can customize webpage for users
The global unique MAC address bought from IEEE (begin with D8-B0-4C);user can define MAC address
Support upgrade firmware via network
Support keepalive,rapidly detect dead links
Support account and password,can be used to page login and network settings
Support one channel Websocket,realize bidirectional transparent transmission between webpage and serial 0
Support Modbus RTU to Modbus TCP
Support UDP broadcast function
Each serial can work as rs232,rs485 or rs422; Default port is RS232 BD9 male port
Four channel serial communication indicator: TX/RX, CTS/RTS, XON/XOFF
Support DC adapter and 5.08-2 terminal power supply
Reload button,one key to restore default settings
RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation
Application Field of 4 ports Serial Device Servers
Industrial data transmission, industrial automation
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
Serial ethernet converter USR-N510, which can realize bidirectional transparent transmission between RS232/RS485/RS422 and Ethernet. Through simple settings via webpage or setup software can assign working details, realize serial data and TCP/IP data package transparent transmission by serial ethernet converter. USR-N510 is based on ARM processor and it is internally integrated with TCP/IP protocol. User can easily realize embedded device networking.
Application Field For [Serial Ethernet Converter]
Industrial data transmission, industrial automation
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
Character
Industrial Solution TI Cortex M4 Solution, work temp at -40~85C
Power Supply DC/Terminal type 5V~36V
Serial Port RS232/RS485/RS422, 3-in-1 serial port
Serial Signal RS232: TX/RX, CTS/RTS
RS485:A/B/G
Flow Control Software: XON/XOFF
Modbus Gateway Modbus TCP to Modbus RTU in bi-directional
Modbus Polling
Advanced Character -Network Printing
-Web socket: Serial to Webpage
-Modify MAC
-Hardware watchdog
-ARP of server domain name
Certification CE/FCC/RoHs/WEEE
Work Mode TCP Server/ TCP client/ UDP Server/UDP Client/ HTTPD Client
Built-in web page Customized web page is acceptable
Protect Surge Protection, ESD 2KV, for more harsh industrial environment
Point 1
Ethernet 10/100Mbps, support Auto-MDI/MDIX
A port can correspond to 2 Sockets
Provide PC TCP/IP socket programming examples such as VB, Andriod, IOS etc.
Point 2
Virtual serial port, provide corresponding software USR-VCOM
Baud rate: 600bpgs~230.4Kbps
Reload button to restore default settings
Support keep alive, rapidly detect dead links.
USR-TCP232-410S is a dual serial RS232 RS485 Ethernet converter, which is based on TI Cortex-M4 solution & integrated TCP/IP protocol stack.
Basic Function of RS232 RS485 Ethernet Converter
Industrial Solution: TI Cortex M4 Solution, -40~85C
Web Server: Web socket/ Web to Serial
Modbus Gateway: Modbus RTU to Modbus TCP / Modbus Pollinig
Flow Control: CTS/RTS, XON/XOFF
2 Network links, each serial supports sending data to two target servers
Network Printing
N series supports hardware watchdog, never crash
Basic Feature of RS232 RS485 Ethernet Converter
Multiple indicator lights for convenient debugging
Power-line terminal for industrial application
ARM kernel and TCP/IP protocol stack
Auto-MDI/MDIX,RJ45 port with 10/100Mbps
TCP Server,TCP Client,UDP,UDP Server and HTTPD Client work mode
Two ports can work independently at the same time
Support virtual serial port and provide corresponding software USR-VCOM
Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space
DNS and DHCP supported
Provide PC TCP/IP SOCKET programming example,VB,C++,Delphi,Android,IOS
Built-in webpage;also can customize webpage for users
Reload button,one key to restore default settings
RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation
The global unique MAC address bought from IEEE,user can define MAC address
Upgrade firmware via network
Keepalive,rapidly detect dead links
Support account and password,can be used to page login and network settings
Support one channel Websocket,realize bidirectional transparent transmisison bewteen webpage and serial 0
Support UDP broadcast function,send and receive data from all ip in the network
Ethernet Serial Converters Application Field
Industrial data transmission, industrial automation
security and protection monitoring, public security
Smart home, power control, environmental monitoring, intelligent agriculture
Door check on work attendance system, POS system, rice selling system
Building automation system, power monitoring, self-service banking system, telecom machine room monitoring
100G QSFP28 LR4 10KM LC Optical Transceiver
Product Model:EQxx10X-3LCD10
Data Rate:100G
Wavelength:CWDM
Distance:10km
Connector:LC
Fiber Type:SM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Hot pluggable QSFP28 MSA form factor
2.Compliant to IEEE 802.3ba 100GBASE-LR4
3.Up to 10km reach for G.652 SMF
4.Single +3.3V power supply
5.Operating case temperature: 0~70
6.Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
7.4x28G Electrical Serial Interface (CEI-28G-VSR)
8.Maximum power consumption 4.0W
9.Duplex LC receptacle
Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission. Reversely on the receiver side, the module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
The central wavelengths of the 4 LAN WDM channels are 1295.56, 1300.05, 1304.58 and 1309.14 nm as members of the LAN WDM wavelength grid defined in IEEE 802.3ba. The high performance cooled LAN WDM EA-DFB transmitters and high sensitivity PIN receivers provide superior performance for
100Gigabit Ethernet applications up to 10km links and compliant to optical interface with IEEE802.3ba
Clause 88 100GBASE-LR4 requirements.
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface;
2.Switched backplane applications/Router/Server interface;
3.Other optical transmission systems
40G QSFP+ ER4 40KM LC Optical Transceiver
Product Model:EQxx4X-3LCD40
Data Rate:40G
Wavelength:CWDM
Distance:40km
Connector:LC
Fiber Type:SM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Transmission data rate up to 11.2Gbps per channel
2.QSFP+ MSA compliant
3.Compliant to IEEE 802.3ba specification for 40GBASE-ER4 links
4.4 CWDM un-cooled DFB lasers, using ITU G.694.2 wavelength grid at 1271, 1291, 1311Â and 1331nm
5.High Sensitivity APD-TIA with optical DEMUX
6.Up to� 40km reach over standard single mode fiber
7.Hot pluggable electrical interface
8.Operating case temperature 0 C to +70 C
9.3.3V power supply
10.RoHS 6 compliant lead free 11.ROHS Compliance.
Description
This product is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (4ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface;
2.Switched backplane applications/Router/Server interface;
3.Other optical transmission systems
Package type: Individual package or 10pcs/package
Features
1. Â Compliant to the 40GbE XLPPI Â electrical specification per IEEE Â 802.3ba-2010;
2.Compliant to QSFP+ SFF-8436 Â Specification;Aggregate bandwidth of >40Gbps;
3.Operates at 10.3125 Gbps per  electrical channel with 64b/66b  encoded data;
4.QSFP MSA compliant;RoHS Compliant Part;Temperature range 0 °C to 70 °C;
5.Capable of over 100m transmission  on OM3 Multimode Fiber  (MMF)and 150m  on OM4 MMF;
6.Single +3.3V power supply  operating;Built-in digital diagnostic functions;
7.Utilizes a standard LC duplex fiber  cable allowing reuse of existing  cable infrastructure;
Applications
1.Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
10GBASE-ZR SFP+ 1550NM 100KM OPTICAL TRANSCEIVER
Item NO.: ES55X-3LCD100
Date rate: 10G
Wavelength: 1550nm
Distance: 100KM
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Supports up to 10.7Gbps bit rates/Hot-pluggable SFP+ footprint
2.Un-cooled 1550nm Cooled EML laser and APD photodiode, Up to 100km for SMF transmission
3.Compliant with SFP+ MSA and SFF-8472 with duplex LC Receptacle
4.Compatible with RoHS/Single +3.3V power supply
5.Real Time Digital Diagnostic Monitoring
6.Operating case temperature:Standard: 0 to +70°C
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
QSFP-40G-ESR4 850NM 300M/400M MPO TRANSCEIVER
Item NO.: EQ854X-3MCD03
Date rate: 40G
Wavelength: 850nm
Distance: 300M
Connector: MPO
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1. High Channel Capacity: 40 Gbps per module / Up to 11.1Gbps Data rate per channel;
2. Maximum link length of 300m links on OM3 multimode Fiber or 400m links on OM4 multimode fiber;
3. High Reliability 850nm VCSEL technology / Electrically hot-pluggable;
4. Digital diagnostic SFF-8436 compliant / Power dissipation < 1.5 W;
5. Case operating temperature range:0°C to 70°C .
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
25G SFP28 CWDM 10KM DDM optical transceiver
Item NO.: ES2Cxx2X-3LCD10
Date rate: 25G
Wavelength: 1270-1570nm
Distance: 10KM
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Hot-pluggable SFP28 form factor/Full-duplex transceiver modules
2.CWDM DML laser and PIN receiver
3.Compliant with SFP28 MSA, 25G Ethernet and CPRI/eCPRI specifications
4.Data rate up to 25.78Gbps/ Wavelength options: 1270nm-1370nm and 1470nm-1570nm (20nm spacing)
5.Reach up to 10km over SMF/ Power consumption < 2W/ Dual LC receptacles
6.Operating case temperature range from 0°C to 70°C (-40°C to +85°C optional)
7.3.3V power supply voltage/RoHS compliant (lead free)
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
16G SFP+ BIDI 1270/1330NM 10KM DDM optical transceiver
Item NO.: ESBxxX6-3LCD10
Date rate: 16G
Wavelength: 1270/1330nm
Distance: 10KM
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Supports up to 14.025Gbps bit rates/Hot-pluggable SFP+ footprint
2.Compliant with SFP+ MSA and SFF-8472 with single LC receptacle
3.Compatible with RoHS/ Single +3.3V power supply
4. Real Time Digital Diagnostic Monitoring
5.Operating case temperature:Standard: 0 to +70°C
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
16GBPS SFP+ MM 850NM 100M DDM optical transceiver
Item NO.: ES85X6-3LCD01
Date rate: 16G
Wavelength: 850nm
Distance: 100M
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Supports up to 14.025Gbps bit rate/ Hot-pluggable SFP+ footprint;
2.850nm VCSEL laser and PIN photodiode, Up to 100m for OM3-MMF transmission;
3.Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle;
4.Compatible with RoHS/ Single +3.3V power supply;
5.Real Time Digital Diagnostic Monitoring;
6.Operating case temperature: Standard: 0 to +70°C;
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
10G SFP+ SC EPON ONU Optical Transceiver
Item NO.: EEP2592-3SC20
Date rate: 10G
Wavelength: 1270/1577
Distance: 20KM
Connector: SC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
SFP+ Package with SC Receptacle/ Single +3.3V Power Supply
2.10.3125 Gbps / 1270nm Burst-Mode Transmitter with DFB laser
3.10.3125 Gbps / 1577nm High Sensitivity/Continuous-Mode PIN-TIA Receiver
4. LVTTL Tx_Burst, Tx_SD, LOS/ LVTTL Sleep Mode for Power Consumption
5.Operating Case Temperature Standard: 0~+70 Industrial: -40~+85
6. Compliant with Class 1 FDA and IEC60825-1 laser safety
7. Compliant with SFF-8472 MSA/Compliant with IEEE 802.3av
8. Compliant with SFP+ MSA SFF-8431/ RoHS-6 compliance
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
QSFP28 100G PSM4 Optical Transceiver 2KM LC
Item NO.: EQ23110X-3LCD2
Date rate: 100G
Wavelength: 1310nm
Distance: 2KM
Connector: LC
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
2923 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
