DWDM Optical Add/Drop Multiplexer (OADM) is a passive optical device used in WDM networks for adding and dropping one/multiple 100 GHz DWDM channels in the C-band into one or two fibers, while letting the rest of the wavelengths bypass to the needed destination. Using the DWDM technology can add effectively WDM capability to their existing and new networks, and extend the optical signals transmission distance. DWDM OADM modules are available in single-side (East or West) and dual-side (East and West) configurations. With matching MUX/DEMUX units placed at each end of an optical link, multiple data channels can be combined and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop 2, 4, 8 data channels at any point along the trunk.
The HT6000-OD/OM16 from HTF is a combined passive Sixteen-Channel 100GHz DWDM multiplexer or de-multiplexer (MUX or DEMUX), It combines standard 100GHZ DWDM ITU grid channels 21 through 60, and applies to 1U chassis ,2U chassis and 5U chassis,occupying one service slots. The HT6000-OD/OM16 is ideal for increasing the fiber capacity between two sites without the need for installing or leasing additional fibers. The complete passive solution requires no power cabling and no configuration; it is a true plug and play solution. The Mux/Demux enables separation of the active equipment from wavelength multiplexing components. It may be used in conjunction with active optical devices from HTF or from another DWDM-compliant manufacturers.
Redundant Dual Rate Transponder 10 Gbps Repeater/Converter/Transponder This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP+ Multi-Rate Quad Transponder 10Gbps Repeater/Converter/Transponder SFP+ Multi-Rate Quad Transponder has 8 SFP+ slots, The device provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fiber Channel 1/2/4/8/10, CPRI, etc. The SFP+ transponder supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps; The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Media conversion Signal repeating Lambda conversion 3R signal regeneration Re-transmission Re-shaping Re-timing Multi-rate supports 1Gbps ~ 10Gbps Supports Loopback Test Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10Gbps CPRI: 2/3/4/5/6/7 1G/10G Ethernet SDH STM-4/16/64 The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP+ Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. By means of the implemented 3R functionality (re-amplification, re-shaping, re-timing) for signal processing, the module is also suited for the use as a repeater, The SFP+ transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
SFP28 Multi-Rate Quad Transponder 125Mbps~32 Gbps Repeater/Converter/Transponder SFP28 Multi-Rate Quad Transponder has 8 SFP28 slots, The device provides a flexible transmission of various protocols, such as 100M/1G /10G/25G Ethernet, SDH STM1/STM4/STM16/STM64, Fiber Channel 1/2/4/8 /10/16/32Gbps, CPRI, etc. The SFP28 transponder supports multi-rate functionality with optical data rates from 1Gbps up to32Gbps;The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Multi-rate supports 1Gbps ~ 32Gbps Supports ALS, LFP Flexible transmission of various protocols Fiber Channel 1/2/4/8 /10/16/32Gbps CPRI;2/3/4/5/6/7 1G/10G/25G Ethernet SDH STM-4/16/64 Media conversion Signal repeating Lambda conversion The main field of application is CWDM and DWDM networks. As an intelligent transponder module, SFP28 Transponder converts a transparent data channel to a corresponding CWDM/DWDM wavelength. The module is also suited for the use as a repeater,The SFP28 transponder models fit HT6000 Series CH04, CH08, CH20 Chassis.
40G/100G Transponder supports three 40G or 100G service access. The wide range of optical infrastructure solutions includes media conversion, signal repeating, lambda conversion. Support single channel 40Gbps/100Gbps large particle transmission Client side interface: support 3xQSFP28 module Line side interface: support 3xQSFP28 module Support DDM digital diagnosis Support ALS function Support LFP function 40G&100G Transponder supports three 40G or 100G service signals are relayed and amplified, and can be converted into three WDM standard wavelength optical signals, so that the multiplex unit can perform wavelength division multiplexing demultiplexing on optical signals of different wavelengths. A metropolitan wavelength division short-range transmission scheme suitable for 40G or 100G rates.
Consisting of distributed IO coupler, I/O modules and terminal module. Among them, the I/O modules can be freely combined according to your needs. It supports up to 32 I/O modules. Fieldbus protocols: Modbus TCP Max. IO Module: 32 Data transmission medium: EtherNet CAT5 Connection method: 2*RJ45 Transmission rate: 10/100 Mbit/s Transmission distance: 100m Logic operation: built-in logic computing function Max. number of socket links: 15 Electrical isolation: Y
The 400G Muxponder Transmitter supports four QSFP28 client interface and one CFP2 line-side interface to support single-channel 400Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission. HTF 400G Muxponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates. The 400G Muxponder from HTF offer a choice of pluggable QSFP28 Client Side Optics and CFP2 -DCO Coherent DWDM Line Side Optics based on distance and capacity requirements. The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 400G Muxponder models fits for HT6000 series CH04, CH08, CH20 chassis.
The 100G OTN Transmitter supports one QSFP28 client interface and one CFP line-side interface to support single-channel 100Gbps large-grain data transfers. The industry's most advanced coherent technology and FEC forward error correction coding technology enable high-capacity, long-distance high-performance transmission. Support single channel 100Gbps Client side: QSFP28 module Line side: CFP 100Gbps coherent module; Ultra-long-distance transmission: FEC technology can be used to achieve 1500km transmission without regeneration Large dispersion tolerance: 40000ps.nm Support port loopback test Support 80 channel wavelength tunable HTF 100G Transponder includes integrated OTN FEC capability on the transponder, allowing operation over longer distances or in applications requiring ultra-low bit error rates. The 100Gbps Transponders from HTF offer a choice of pluggable QSFP28 Client side optics and CFP Coherent DWDM line side optics based on distance and capacity requirements. The Coherent DWDM Optics are the most technologically advanced and offer benefits on dispersion management, signal reach, and other optical properties. Coherent DWDM Optics can greatly increase the capacity and reach of an optical network, The 100G Transponder models fit for HT6000 Series CH04, CH08, CH20 Chassis.
SL2.1A is a single 5V power supply chip. The Integrated LDO(Include one 5v->3.3v LDO and one 3.3v->1.8v LDO) make the solution so simple. Only some capacitances needed for PCB. The chip also integrates Power-On-Reset circuit. Fully compliant with USB spec. Rev 2.0(USB 2.0) 12M crystal oscillator must be matched when using SL2.1A 5 Upstream facing port supports HS (480MHz) and FS(12MHz) modes 4 downstream facing ports support HS(480MHz), FS(12MHz) and LS(1.5MHz) modes. Integrated USB 2.0 Transceivers. Connected external 12MHz Crystal Oscillator is recommended for this chip.
OVERVIEW: QUICK INFORMATION: RAW MATERIAL: SPANDEX / NYLON USE: KNITTING/WOVEN FABRIC, SOCKS YARN COUNT:280D+40D PRODUCT OF ORIGIN: ZHEJIANG, CHINA COLOR: RAW WHITE/ DOPE DYED BLACK/ COLORS LUSTER: SEMI-DULL TWIST DIRECTION: S/Z PACKAGING & DELIVERY: PACKING: BOBBINS IN PLASTIC BAGS, 6 BOBBINS PER CARTON PALLET PACKING: AVAILABLE CARTON SIZE: 70 X 48 X 30 IN CM (LENGTH X WIDTH X HEIGHT) LEAD TIME: WITHIN 10-30 DAYS AFTER RECEIPT OF ADVANCE PAYMENT OR L/C LOADING QUANTITIES: AROUND 8000KGS/20GP; 20000KGS/40HQ SAMPLING: FREE SAMPLES ARE AVAILABLE. EXPENSE FEES ARE TO BE BOTHED BY CUSTOMERS TESTING: DYE TEST SURFACE CLEANS INTERMINGLED POINT CHECK PHYSICAL PROPERTE TEST
1. The dearbeacon e9 is a new generation beacon that loaded bluetooth 5.0 hardware platform and Minibeacon plus intelligence software. 2. E9 has a smart rotatable mechanical design for the housing that makes the coin battery replaceable and ip67 waterproof grade combination perfectly. 3. Moreover, e9 can be fixed by the screw and 3m adhesive. 4. E9 dearbeacon advertises standard ibeacon and eddystone (uid, url, tlm) data packet simultaneously. 5. The user can configure the e9 dearbeacon via configuration app beaconset+ as well.
Introduction : The GCAN-205 module is a CAN-Bus converter, used for Ethernet and CAN-Bus connection. It is an industrial-grade CAN-Bus converter, whose function is to realize bidirectional conversion between CAN-Bus and Ethernet of Modbus TCP protocol. Hardware Features : 1. High speed 32-bit industrial grade processor ; 2. Embedded Watchdog timer ; 3. External voltage (DC+24V, 40mA) ; 4. Electrostatic discharge (ESD) Immunity level: Contact Discharge±2KV, Air Discharge±15KV ; 5. Fast transient Burst Impedance Level: ±1KV ; 6. Surge immunity level: ±1KV ; 7. Working temperature: -40.00~ 85.00 ; 8. Working humidity: 5%~95%, no condensation ; 9. Dimensions: 115mm (L) * 100mm (W) * 22mm (H) ; 10. Support customization and OEM
Mobile Towers Erection Work
Mobile Towers Erection Work
Mobile Towers Erection Work
Mobile Towers Erection Work
Electrical Tower Erection
Electrical Tower Erection
CHASSIS SPECIFICATIONS Model BigTao200 BigTao220 BigTao6000 Slots 2 2 6 Power AC 110~240V CPU Intel dual-core HF CPU Intel Atom E3845 CPU Intel dual-core HF CPU System Control Reset button, Power switch Cooling Devices 2 System Fans and 1 Power Fan 4 System Fans 2 System Fans and 1 Power Fan Status Indicators Power, Hard disk Power, Fan, Temp, Link LCD Screen Power, Hard disk Temperature 5-40 Humidity 20-85%, RH Load Module Available P/V6000 Series, P/V8000 Series, P/V9000 Series, P/V9600 Series Size 310mm 280mm 89mm 371mm 424mm 107mm 440mm 436mm 133mm Weight 3.5kg 5kg 12kg MODULE CLASSIFICATION V Series Test Modules High performance and full-specification Ethernet test modules running on BigTao series platform. Supporting full functions of all Ethernet technology test needs. Classified by the port rate: V6000 series support 10/100/1000 Mbps per port V8000 series support 10 Gbps V9000 series support 40 Gbps V9600 series support 100 Gbps P Series Test Modules P series test modules deliver network testing functionality on BigTao series test platform with high density.P series are specialized developed for comprehensive and automated testing of networking devices on production line. Classified by the port rate: P6000 series support 10/100/1000 Mbps per port P8000 series support 10 Gbps P9000 series support 40 Gbps P9600 series support 100 Gbps V Series Test Modules List Module Name Ports Per Module Connecter Type Single Rate V6016C 16 10/100/1000M RJ45 Copper 10/100/1000 Mbps V6016F 16 1000M SFP Fiber 1000 Mbps V6016M 8+8 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000 V8008M 4+4 10G RJ45 Copper and 100G SFP+ Fiber 10 Gbps V8004M 2+2 10G RJ45 Copper and 100G SFP+ Fiber 10 Gbps V9002F 2 40G QSFP+ Fiber 40 Gbps V9602F 2 100G QSFP28 Fiber 100 Gbps P Series Test Modules List Module Name Ports Per Module Connecter Type Single Rate P6016C 16 10/100/1000M RJ45 Copper 10/100/1000 Mbps P6016D 12+4 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 210/100/1000 Mbps and 100/1000 Mbps P6016E 8+8 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000 Mbps and 100/1000 Mbps P6016F 16 100/1000 SFP Fiber 100/1000 Mbps P6012C 12 10/100/1000M RJ45 Copper 10/100/1000 Mbps P6012D 8+4 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000 Mbps and 100/1000 Mbps P6012F 12 100/1000 SFP Fiber 100/1000 Mbps P8008F 8 10G SFP+ Fiber 10 Gbps P8004F 4 10G SFP+ Fiber 10 Gbps P8004C 4 10G RJ45 Copper 10 Gbps P8002F 2 10G SFP+ Fiber 10 Gbps P8002C 2 10G RJ45 Copper 10 Gbps P9002F 2 40G QSFP+ Fiber 40 Gbps P9602F 2 100G QSFP28 Fiber 100 Gbps
