Qualcomm-Atheros QCA9880 chipset
2.4GHz max 24dBm & 5GHz max 23dBm output power
IEEE 802.11ac compliant & backward compatible with 802.11a/b/g/n
2x2 MIMO Technology, up to 867Mbps
Mini PCI Express edge connector
Support the Frequency 4920MHz~4980MHz
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Supports Spatial Multiplexing, Cyclic-Delay Diversity (CDD), Low-Density Parity Check
(LDPC) Codes, Maximal Ratio Combining (MRC), Space Time Block Code (STBC)
Supports IEEE 802.11d, e, h, i, k, r, v time stamp, and w standards
Supports Dynamic Frequency Selection (DFS)
if you have wifi6 needs,or Router motherboard and wireless network card feel free to contact us
NETWORK EQUIPMENT
KUNAR 42U RACK 600X1200
WE HAVE 36 PEICES. EACH PRICE IS :- 217 USD
ITS LITTLE USED AND WORKING IN 100% GOOD CONDITION.
FIRST COME FIRST GET.
Qualcomm-Atheros IPQ6000
Quad-core ARM 64 bit A53s 1.2GHz processor
2.4GHz, 2x2 MU-MIMO OFDMA Technology, up to 573Mbps
5GHz, 2x2 MU-MIMO OFDMA Technology, up to 1201Mbps
2 on board radios (Dual Band Concurrent Radio)
Supports Dynamic Frequency Selection (DFS)
An LTE Wireless Router. It delivers multi-service user experience, provides the VoIP telephony(Optional), the advanced data services and mobile services in a single box solution. Aiming at SMB/Shop communications scenario, it provides the rich communications interfaces for the kinds of the terminals, including Wifi PoS, ATM machine, Fax machine, IP Phone, IP Camera etc. Besides, the advanced VPN feature protects the network security absolutely.
LTE
LTE CAT4
LTE FDD Downlink: 150Mbps Uplink: 50Mbps
LTE TDD Downlink: 130Mbps Uplink: 30Mbps
LTE Bands Combo
Q1: LTE Band 1/3/7/8/20/38/40/41; 3G Band 1/2/5/8
Q2: LTE Band 1/2/4/7/12/38/40/41; 3G Band 1/2/5/8
Q3: LTE Band 1/2/4/7/28/40; 3G Band 1/2/4/8
Q4: LTE Band 3/7/20/42/43
*The bands could be designed according to the operator bands
Data Network
Ethernet Port: 4x10/100Mbps Ethernet Port LAN
Or 1x10/100Mbps Ethernet Port WAN+3x10/100Mbps Ethernet Port LAN
Static IP address, PPPoE, DHCP
PnP: Auto detection-line,upgrade
QoS: Destination/Source MAC/IP, Application, DSCP
Advanced Routing: Static Route, Policy Route, DNS Proxy,
Port Forwarding/Triggering
Internal Address Management: DHCP Server, IP and MAC Address Bind,
A 4G Cat 4 MiFi MN4 is a smart mobile wireless hotspot, designed for WIFI users to get access to the internet. It supports download transmission of up to 150Mbps. With an internal 2050mAh battery, MFM is able to work as long as 6 hours continuously, making it an ideal companion for travel, business trips, outdoor activities and more.
LTE Feature
*The bands could be designed according to the operator bands
Hardware
Antenna: 4G Main antenna
4G MIMO Rx Diversity antenna
WiFi antenna
LCD Display: 1.46" 128 128 TFT
LED: Monochromatic
USB: Micro USB 2.0 High Speed
SIM/USIM Card slot and Micro-SD Card slot
Button: Power, WPS, Reset
Battery Item: Lion battery 2400mAh
WIFI Features
Frequency Band: 2.4GHz
802.11b/g/n up to 150Mbps
Modes supported: 802.11b/g/n
User amount: Max to 10
Security modes: Open, WEP, WPA-PSK, WPA2-PSK
WPA-WPA2 Hybrid mode (Mixed Mode),TKIP-CCMP Hybrid mode (Mixed Mode)
WPS 2.0, Hidden SSID supported
Concurrency (FC quality for LE1.0): AP-STA, mSSID (AP-AP) up to 2 SSID's
STA-STA communication block/allow between two SSIDs
Other: QoS and PS, WMM, WMM-PS/uAPSD, ERP protection, Coexistence,
LTE coexistence (static channel selection), Data Switching/Forwarding,
Switching of packets amongst clients, Support for forwarding data to and from WAN,
VPN Pass-through
Environment
Normal Operation: 0C to +45C
Restricted Operation:-10C to +55C
Storage: -20C to +70C
Type: Portable hotspot device with LCD(optional)
Size(mm):100*63.5*14.6 Weight(g):105g
With over 15 years of experience in wireless industry and penetrating market olfaction, Wallys has designed and manufactured many high quality and cost-effective routerboards and wireless network cards
products:
wifi6 router
WiFi 6 (802.11ax)
802.11ac wireless
DR-AP40X9-A
Indoor Aluminium alloy material
IPQ4019/4029 support OpenWrt 2.4/5G dual bands
Description
DR-AP40X9-A (Two Versions) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board;2 x 2.4G&5G Onmi Antennas; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure.
1. Feature
*External type dipole antenna
* 2.4~2.5&5.15~7.15GHz of frequency
* Plastic rod of Black
* RoHS compliance
2.� Application
* Wi-Fi 6E Wireless Communication
* WLAN device, WLAN Router, e.g., AP,PIC Wireless Card
3.� Description
Suzhou Wallys Communication Co., Ltd, this miniature antenna is designed for Wi-Fi 6E applications
and can be easily built-in portable devices for SMA Plug. It has excellent stability and sensitivity to
consistently provide high signal reception efficiency
1. Feature
*External type dipole antenna
* 2.4~2.5&5.15~7.15GHz of frequency
* Plastic rod of Black
* RoHS compliance
2.� Application
* Wi-Fi 6E Wireless Communication
* WLAN device, WLAN Router, e.g., AP,PIC Wireless Card
3.� Description
Suzhou Wallys Communication Co., Ltd, this miniature antenna is designed for Wi-Fi 6E applications
and can be easily built-in portable devices for SMA Plug. It has excellent stability and sensitivity to
consistently provide high signal reception efficiency
2.4GHz wireless reception technology, the distance can be up to 10m.
Digital/analog two modes of operation, can be switched at any time, with mode hint lamp.
4 axis and 12 buttons are designed to meet the needs of game buttons (digital mode: 2 axis and 10 buttons; Analog mode: 4 axis 12 keys).
Support live football, boxing, drag racing, JP speed and other computer games
Support USB1.1/2.0 (USB to PS2 converter needs to be prepared separately)
Nurture supports Windows 98 / ME / 2000 / XP/Vista/W7 / project.it
Use 4 AAA (Size 7) batteries.
The product includes 2 wireless handles and 1 handle receiver.
Method of use:
* Plug the receiver into the game console or PC, TV, computer and other devices, and then connect the gamepad;
* Open the power switch of the handle and the handle can be connected to operate
Wallys Communications (Suzhou ) Co., LTD
With over 15 years of experience in wireless industry and penetrating market olfaction, Wallys has designed and manufactured many high quality and cost-effective routerboards and wireless network cards
products:
wifi6 router
WiFi 6 (802.11ax)
802.11ac wireless
With over 15 years of experience in wireless industry and penetrating market olfaction, Wallys has designed and manufactured many high quality and cost-effective routerboards and wireless network cards
products:
wifi6 router
WiFi 6 (802.11ax)
802.11ac wireless
DRPOE33024PF 24*10/100/1000M RJ45 ports, 2*1000M SFP slot ports 26-Port PoE Fiber Switch support IEEE802.3af/at
n Full gigabit access, gigabit SFP port uplink
All series support "gigabit Ethernet port and gigabit SFP fiber port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.
Support non-blocking wire-speed forwarding.
Support full-duplex based on IEEE802.3x and half-duplex based on backpressure.
n Intelligent PoE power supply
24*10/100/1000Base-T RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
n Stable and reliable
Low power consumption, galvanized steel casing. The Fan active cooling.
Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
CCC,CE, FCC, RoHS
Plug and play, no configuration, simple and convenient.
The user-friendly panel, it can show the device status through the LED indicator of PWR, Link ,PoE.
INTERFACES DC POWER INPUT
9-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of DC jack ETHERNET INTERFACES
Five port 10/100 Mbps Ethernet Switch
WAN and 4 LAN ( Configurable)
ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) Protected.
Connection by means of standard RJ-45 connector WLAN INTERFACE
2T2R 802.11 b/g/n 2.4 GHz
300Mbps Wi-Fi AP with Encryption
Frequency range : 2.4GHz~2.497GHz
Security: WEP/TKIP/AES/WPS/WPA/WPA2
WEP 64/128, WPA, WPA2 Engine
TX output power : +16.5dBm
One external antenna CELLULAR INTERFACES
Two Mini PCI Express slots to connect 2G/3G/4G modules ( One optional)
Optional GPS
Interfaces
USB 2.0 High speed interface (to the CPU)
Single or optional Dual SIM
One external antenna USB 2.0 INTERFACE ( OPTIONAL)
One USB 2.0 full speed capable Host interface
Standard USB 2.0 Type A Host connector OPTIONAL EXPANSION INTERFACE
Expansion interfaces to support more IOs, RS232, RS485, etc PROCESSING COMPLEX CPU & MEMORY
DC POWER INPUT
9-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE
Based on Sierra Wireless Module
LTE CAT4 cellular connectivity with UMTS/GPRS fallback
ï?·Following key features of the Module
4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41
3G UMTS/HSPA+: B1/ B8
2G EDGE/GSM/GPRS: 900/ 1800 MHz
Interfaces
Two SMA connectors for External Main and Diversity Antennas
Single Nano SIM USB INTERFACE
Micro USB interface for connecting Host.
Enumerate like ECM port GPS
Supports RF bands of GPS, GLONASS, Galileo, BeiDou
SMA connector for External Antenna
Supports active or Passive by assembly option
3.7V at 20mA available for supporting active antenna 10/100 ETHERNET INTERFACE
One 10/100 Ethernet Interface
ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected.
Connection by means of standard RJ-45 connector STORAGE
SD Card socket for Internal Data storage
INTERFACES DC POWER INPUT
10-30V Wide DC input @1A (non-isolated)
Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Internal Overvoltage, Over current protection
Internal circuitry to enable remote power ON/OFF of 12V rail.
Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE
â?¢ Based on Sierra Wireless Module
â?¢ LTE CAT4 cellular connectivity with UMTS/GPRS fallback
Following key features of the Module
o 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41
o 3G UMTS/HSPA+: B1/ B8
o 2G EDGE/GSM/GPRS: 900/ 1800 MHz
Interfaces
o Two SMA connectors for External Main and Diversity Antennas
o Single Nano SIM USB INTERFACE
Micro USB interface for connecting Host. GPS
Supports RF bands of GPS, GLONASS, Galileo, BeiDou
â?¢ SMA connector for External Antenna (Main and Diversity)
â?¢ Supports active or Passive GPS Antenna by assembly option
â?¢ 3.7V at 20mA available for supporting active antenna
RS-485
â?¢ 3KV isolated Half duplex RS-485 channel
â?¢ ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected.
Connection by means of screw terminal connectors EMMC FLASH
4GB eMMC flash for Internal Data storage
LTE CAT-4 mini PCIe MODULE is mini PCI express formfactor card based on Sierra Wireless WP7608, designed for Industrial-Grade devices with high data throughput but small form factor requirements. It Offers an application processor (ARM Cortex- A7 at 1.3GHz) running the open source Legato platform, optional GNSS receiver, and cellular modem with an ultra-low power domain. WP7608 provides an integrated device-to-cloud architecture enabling IoT developers to build a Linux-based product on a single module and seamlessly send valuable user and product data to the cloud. This module supports India specific bands for LTE, HSPA+, UMTS and GSM/GPRS/EDGE connectivity. It offers peak download rates of 150 Mbps and peak upload rates of 50Mbps while working in LTE CAT-4 Mode and provides fall back to 3G/2G networks to offer seamless connectivity. APPLICATIONS
All the above listed powerful set of features enable this module to find suitability in multiple market segments like PDAâ??s/Laptop Computer, Wireless Router and Switch, Vehicle communication System, Remote Monitoring system, etc.
2924 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.